• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1689-1696
• /
• 2008

Heat pumps transfer heat by circulating a substance called a refrigerant through a cycle of evaporation and condensation. But Heat pumps system by only using heat-source is not efficient. Because the mean temperature of North Korean winter season is low, economy of air heat-source heat pump descend. This paper is practiced the simulation on evaluation criteria for Heat pump heating and cooling systems to Rolling Stock. Efficiency of the heat pump in order improving from certainly the development of the technique will be able to prevent a freezing actual condition must proceed. As a result, Below $-10^{\circ}C$ used heating and cooling systems of heat pump format even in cold winter season and is serviceable confirmed with heat source supply circle of the Rolling Stock.

• Smart Structures and Systems
• /
• v.31 no.1
• /
• pp.79-88
• /
• 2023

As the number of deteriorated buildings increases, the importance of safety diagnosis, maintenance, and the repair of buildings also increases. Traditionally, building condition assessments are performed by one person or one company and various inspections are needed. This entails a subjective judgment by the inspector, resulting in different assessment results, poor objectivity and a lack of reliability. Therefore, this study proposed a method to bring about accurate grading results of building conditions. The limitations of visual inspection and condition assessment processes previously conducted were identified by reviewing existing studies. Building defect data was collected using the reverse-engineered three-dimensional (3D) model. The accuracy of the results was verified by comparing them with the actual evaluation results. The results show a 50% time-saving to the same area with an accuracy of approximately 90%. Consequently, defect data with high objectivity and reliability were acquired by measuring the length, area, and width. In addition, the proposed method can improve the efficiency of the building diagnosis process.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.139-142
• /
• 2009

The worldwide energy market is enlarging rapidly according to current issues like globalization, deregulation, global warming and strengthening for environmental regulation as well as the energy technology is developing speedily by the add of information and communication techniques. In spite of these advanced techniques in the field of the renewable energy, solar power depends on the governmental aid largely in comparison with other renewable energy sources because of the high initial investment cost. Therefore it is important to investigate scrupulously for the expected erection site of solar power plant from the planning stage. This paper shows actual measurement data of solar radiation of scheduled solar power locations in the waterworks site with consideration of waterworks facilities and regional specialties and presents the data which was analyzed comparably with the radiation data of adjacent locations served by national authorities. In addition, these data were analyzed using RETScreen and used for making decision on the business validity.

• Journal of Fashion Business
• /
• v.17 no.3
• /
• pp.1-14
• /
• 2013

This study is about the evaluation of the color arrangements of working clothes that are harmonized with working environment and assist in the protection of workers in industrial sites. This study attempted color arrangement design with the intention of giving order to the colors of working environment and working clothes so as to help improve the safety of work and the management aspects including human resource management, efficiency improvement, and the practice of business ethics. The study method consisted of literature research, empirical research, and evaluation research. The literature research performed theoretical examination about colors, industrial safety, and visibility. Three actual outdoor work sites in the machine industry were chosen and pictures were taken at 20-30 m from workers. The background colors of the work environment of each work site and the colors of the working clothes that were actually worn were analyzed through color values measured with a color-difference meter(CR-400). As a result, it was found that between value and chroma which affect visibility, color arrangement based on differences in chroma could be a greater influence than color arrangement based on differences in value. The results of this study could assist the integration of color schemes among working environment colors, people and working clothes by suggesting color arrangements with improved visibility that are applicable to the working clothes of domestic machine manufacturers that are playing a pivotal role in domestic industries and by presenting appropriate guidelines.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1439-1444
• /
• 2005

AIS needs hish efficiency and safety in terms of operational management and, in the aspect of service range, it is time to minimize shadow regions through propagation evaluation of AIS transmitter. Thus this study analyzes shadow regions and the scope of propagation of waves from stations through the electric wave environment of AIS. First, this study examines the characteristics of AIS wave and draws up methods to analyze the scope of propagation of waves according to the characteristics. Second, this study finds out service regions and shadow regions of the 22 stations across the nation by analyzing the actual data based on climate and topography. Lastly, this study summarizes the results of wave conductivity evaluation and conductivity problems and proposes improvement measures.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.13 no.4
• /
• pp.31-38
• /
• 2017

The heating and cooling air conditioning field has been increasing the problems of energy consumption and global warming in the world. A geothermal heat pump has been known as one of the highest efficient heating and cooling system. In this study, the analysis about the test standards of the geothermal heat pump of the Republic of Korea was executed. From the research, the following results were given. It is needed to address the domestic test standard for direct heat exchange geothermal heat pump. Water to air multi geothermal heat pump test standard was only developed in Korea. The test standard to calculate a seasonal energy efficiency ratio for cooling period and heat seasonal performance factor for heating period should be newly developed to estimate actual annual energy consumption and $CO_2$ emission.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.417-417
• /
• 2009

The application of solar energy, in the field of alternative energy, was on the increase tendency. In the case of advanced nations, through continuous R&D, solar hot water heater with high efficiency has been used for the house and the industrial process on business, advanced nations were reached up the experimental stage of solar generation system. But, the actual circumstance of the domestic has been not accomplished the popularization of solar hot water heater and the settlement of it which is the fundamental stage of the solar energy usage. This trouble, the domestic was flooded with small enterprise for producing solar hot water heater, was caused by the popularization and the production without verification of performance. To supply the monitoring program for evaluating solar hot water heater, this research was purpose to improve the technical development of the enterprise for producing solar-heat hot-water-boiler and served as an aid for the enlargement and the popularization on solar energy.

• Journal of the Korean Society of Safety
• /
• v.37 no.5
• /
• pp.22-32
• /
• 2022

The domestic smart factory is being built and spread rapidly, mainly by mid-sized companies and large enterprises according to the government's active introduction and support policy. But these factories only promote production system and efficiency, so harmfulness and risk factors are not considered. Therefore, to derive harmful risk factors in terms of industrial safety for 12,983 government-supported smart factory workplaces from 2014 to 2019, industrial accident status analysis compared workplaces with automation facilities and government-supported workplaces with automation facilities. Also, to reduce risks associated with domestic smart factory processes, twenty government-supported workplaces with automation facilities underwent analysis, evaluating risks through a status survey using the process evaluation table. In addition, the status survey considered region, size, industry, construction level, and accident rate; the difference in risk according to the structure of the process was confirmed. Based on the smart factory process evaluation results, statistical analysis confirmed that serial, parallel, and hybrid structures pose different risk levels and that the risks of mixed structures are greater. Finally, safety control system application was presented for risk assessment and reduction in the smart factory process, reflecting the results of disaster analysis and actual condition investigation.

• Korean Journal of Agricultural Science
• /
• v.43 no.4
• /
• pp.670-677
• /
• 2016

The $6^{th}$ industrialization of agricultural areas, which is the strategy to combine the 2nd industry and the 3rd industry with the 1st industry, is one of the main policy strategies of the inistry of agriculture, food and rural affairs in Korea. This policy strategy focuses on the promotion of small- and medium-size farmers or business firms including agricultural management organizations. Even though various policy programs have been implemented for the $6^{th}$ industrialization of agricultural areas, many agricultural management organizations still claim problems. The purpose of this paper is to analyze the actual conditions of policy programs for the $6^{th}$ industrialization of agricultural areas and to suggest a development plan for the $6^{th}$ industrialization policy for agricultural producers. Especially, we focus on the point of view of agricultural management organizations in Chungnam region. The results of this study present some findings as follows: first, the $6^{th}$ industrialization policy in the agricultural area needs to aim at improving software systems, including human resource systems. Second, the policy programs should focus on improving resident's welfare through building more public facilities and amenities. Third, a strategy of selection and a focus on long-term programs are required to increase the efficiency of policy programs for the $6^{th}$ industrialization of agricultural areas.

• Journal of Korea Multimedia Society
• /
• v.24 no.10
• /
• pp.1449-1460
• /
• 2021

The visual design elements of packaging play an vital role in attracting consumers' attention, forming their sense of pleasure and sensory expectations, as well as having an important impact on the actual product experience. This study aims to explore whether the colors and textures in the packaging design elements of canned beer will affect consumers' senses, judgments and taste perception of canned beer. Participants in Survey I (N=193) evaluated their expectations for beer freshness, softness, bitterness and alcohol content by observing the packaging of canned beer, then recorded whether they could get the expected experience when tasting beer, and evaluated their preference and purchase intention. In the Survey II, 4 kind of colors and 2 types of texture shapes were applied, and all participants were provided with the same beer for multivariate cross contract analysis to evaluate the specific impact of color and texture of packaging design elements on consumers' taste and the interaction between sensory judgment and taste perception.The results showed that both colors and textures had a significant affect on the sensory expectation (pre-tasting score) of canned beer, but their effects on the sensory score after tasting (actual perception)were inobvious. The analysis of the influence of the interaction between color, texture and shape on taste perception shows that when the expected packaging appearance perception is similar to the actual drinking perception (i.e., straight line and B/G or arc line and Y/R), it is more likely to obtain consumers' favor and higher purchase intention evaluation than the inconsistent canned beer packaging (i.e., straight line and Y/R and arc line and B/G). This paper discusses the influence of these results on the packaging design of canned beer and the possibility of improving the brand efficiency by meeting the visual elements of packaging design expected by consumers.