• Agricultural and Biosystems Engineering
• /
• v.2 no.1
• /
• pp.7-14
• /
• 2001

A rice mill plant with a capacity of 3 t/h was constructed with automated facilities at Chonnam National University. A simulation model was developed with SLAMSYSTEM for evaluation and improving the rice mill process. The developed model was validated in the views of hulling efficiency, milling efficiency, milled rice recovery, other materials produced, at bottlenecks in the processes. The results of hulling efficiency, milling efficiency, milled rice recovery in the simulation were, respectively, 81.1%, 89,5%, and 73.1%, while those of the actual mill plant were 81.5%, 90.2%, and 73.5%. The simulation results including the rates of other materials(chaff, bran, broken rice, stone, etc) produced in the processes were almost similar with those of the actual process. In the simulation the bottlenecks were found out in the process for separating brown rice and sorting colored rice. These phenomena also appeared in the actual process. It needed to increase the hourly capacities of the brown rice separator and the rice color sorter. As the developed model could well express the automated rice mill plant, it could be used for designing and improving rice mill plants.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.163-168
• /
• 2017

This paper presented an evaluation method for the efficiency uncertainty of a three-phase induction motor using finite element analysis. The motor efficiency in the finite element analysis is calculated by the loss separation method as in the actual test. In the process of evaluating the efficiency uncertainty, the difference between the finite element analysis and the actual test is the method of calculating the type-A / B standard uncertainty of the input quantity to estimate the efficiency and each losses. For the input quantities which can confirm the instantaneous values with respect to time, the type-A standard uncertainty in the finite element analysis is calculated from the RMS values or average values having separate periods in the steady state. And, the type-B standard uncertainty in the finite element analysis is assumed to be zero. Also, this paper compared and analyzed the efficiency uncertainty evaluated by the proposed method and the efficiency uncertainty through the actual test.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.6
• /
• pp.724-729
• /
• 2018

This paper presented an evaluation method for the efficiency uncertainty of an inverter-fed three-phase induction motor using FEM. The motor efficiency in the FEM is calculated by the IEC 60034-2-3 as in the actual test. In the process of evaluating the efficiency uncertainty, the difference between the finite element method and the actual test is the method of calculating the type-A / B standard uncertainty of the input quantity to estimate the efficiency and each losses. For the input quantities which can confirm the instantaneous values with respect to time, the type-A standard uncertainty in the FEM is calculated from the RMS values or average values having separate periods in the steady state. And, the type-B standard uncertainty in the finite element method is assumed to be zero. Also, this paper compared and analyzed the efficiency uncertainty evaluated by the proposed method and the efficiency uncertainty through the actual test.

• Journal of Information Technology Applications and Management
• /
• v.26 no.5
• /
• pp.13-25
• /
• 2019

Recently, as evaluation of information security (IS) management become more diverse and complicated, the contents and procedure of the evidence to prepare for actual assessment are rapidly increasing. As a result, the actual assessment is a burden for both evaluation agencies and institutions receiving assessments. However, most of them reflect the evaluation system used by foreign government agencies, standard organizations, and commercial companies. It is necessary to consider the evaluation system suitable for the domestic environment instead of reflecting the overseas evaluation system as it is. The purpose of this study is as follows. First, we will present the problems of the existing information security assessment system and the improvement direction of the information security assessment system through analysis of existing information security assessment system. Second, it analyzes the technical guidance for information security testing and assessment and the evaluation of information security management in the Special Publication 800-115 'Technical Guide to Information Security Testing and Assessment' of the National Institute of Standards and Technology (NIST). Third, we will build a framework to implement the evidence collection system and present a system implementation method for the '6. Information System Security' of 'information security management actual condition evaluation index'. The implications of the framework development through this study are as follows. It can be expected that the security status of the enterprises will be improved by constructing the evidence collection system that can collect the collected evidence from the existing situation assessment. In addition, it is possible to systematically assess the actual status of information security through the establishment of the evidence collection system and to improve the efficiency of the evaluation. Therefore, the management system for evaluating the actual situation can reduce the work burden and improve the efficiency of evaluation.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.378-387
• /
• 2000

A rice mill plant with a capacity of 2.5 ton/hr was constructed with automated facilities at Chonnam National University. A simulation model was developed with SLAM SYSTEM for evaluating and improving the rice mill plant. The developed model was validated in the views of hulling efficiency, milling efficiency, milled rice recovery, other materials produced, and bottlenecks in the processes. The results of hulling efficiency, milling efficiency, milled rice recovery in the simulation were, respectively, 81.1%, 89.5%, and 73.1%, while those of the actual mill plant were 81.5%, 90.2%, and 73.5%. The simulation results including the productivity of other materials(chaff, bran, broken rice, stone, etc) produced in the processes were almost similar with those of the actual process. In the simulation the bottlenecks were found out in the processes of separating brown rice and of sorting colored rice. These phenomenon also appeared in the actual process. It needed to increase the hourly capacity of the brown rice separator and the rice color sorter. As the developed model could well express the automated rice mill plant, it could be used for designing and improving rice mill plants. In addition, an alternative model needed to be developed for the system control more accurately and for increasing the rice quality.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.157-169
• /
• 2021

Establishing an investment evaluation system for public ICT projects is ultimately to increase the success rate of public ICT projects in which government finances are invested and to revitalize the projects, thereby establishing a foundation for national economic growth and enhancing the competitiveness of the global ICT industry. This study tried to empirically verify the effect of public ICT project investment evaluation factors established according to the existing evaluation system on actual project success, and to suggest directions for future investment evaluation factors. Five evaluation factors such as public interest, economic feasibility, technology, policy and budget efficiency were derived through prior research, and the effect of these evaluation criteria on actual project success was verified through questionnaires from experts who directly participated in the actual project. In addition, it was confirmed whether the government's support system had a moderating effect between the investment evaluation factors and the project success of the ICT project. The reliability and validity of measurement tools, structural model analysis, and path analysis were empirically analyzed, and the significance of existing ICT investment evaluation factors was verified.

• Journal of the Korean Institute of Educational Facilities
• /
• v.16 no.4
• /
• pp.79-88
• /
• 2009

To enhance the administrational efficiency and for university facility and space management to be public, this research suggests a competent and an objective evaluation system and index. The study will assist national and university finances to contribute towards advanced education. Furthermore, figure out the space management condition of national university by utilizing the evaluation system, and through that suggesting efficient special management method. According to the result of this study, evaluation system for university facility can be widely divided into seven categories; system preparation, members conference, propriety of space allocation, propriety of management system, space use ratio, time control of space use, imposition index of surplus use. Based on these subdivisions, the space management category contains 19 evaluation items and the marking system allows perfect score of 100 points. In result of examining space management condition using the evaluation system, space management was well enforced in research focused university group where as in education centered university group, it shows relatively low enforcement. It also illustrated that efforts of evaluation items were required in categories of imposition index of surplus use and special use ratio in order for efficient space management.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.157-164
• /
• 2012

PURPOSES: Regional offices of the Ministry of Land, Transport and Maritime Affairs use a computerized system called KAMIS so as to manage road equipment systematically. Road agencies can record number of operating days by equipment, actual working hours, accumulated operating hours (or distance) by equipment, and operating cost. However, KAMIS does not provide critical information, although it is strongly related to efficient road management equipment operation. In other words, road agencies do not know whether they have sufficient equipment to handle their actual work. METHODS: Therefore, this study suggests a methodology to evaluate for operational efficiency of road management equipment using analytical hierarchy process(AHP). First of all, estimated weights related criteria can be produced by AHP, and then use operational history by pieces of equipment. RESULTS: Results show that importance of management work can differ from weather conditions through five areas. CONCLUSIONS: Commonly, this results can imply to help save money for the purchase and maintenance of road management equipment, and they would improve the functional performance of KAMIS.

• Journal of Distribution Science
• /
• v.14 no.1
• /
• pp.85-91
• /
• 2016

Purpose - Recently, the importance of rapid change in business models is more and more increasing as the change of information technology environment. Therefore, a variety of business models have emerged. On the other hand, there is no company that can generate revenue. Many enterprises are still maintained while they are changing only their appearance of the business model. Business model is important in e-commerce. However, a lot of researches are targeted only in Web sites. Thus, e-commerce companies do not have the infrastructure for measuring and business models. The purpose of paper is to evaluate factors which are related with the structuring of the e-commerce success. And it proposed a financial items and non-financial items. From the perspectives of administrators and managers, the paper researches the possibility for E-Commerce Evaluation Model as a valuable criteria in measuring business model. Research design, data and methodology - The methods are taken by the classification for the type of business-to-business transactions, transactions subject, and the degree of integration and innovation capabilities. Financial and Non-financial value is used to build E-Commerce Evaluation Model. Evaluation items in Administration's perspective are composed with enhance the effectiveness of the mission, improving efficiency of the administration, and control of costs. Evaluation items in the customer's perspective were measured by customer participation and cooperation with customer Satisfaction. In the case of researching the information system's perspective, three criteria are used such as adequacy of the development process, improvement of the quality of service, and maintenance of standardized information technology. In researching for the ICT competence's perspective, evaluation items were composed of enhanced user capabilities, utilizing new technologies, and empowerment of information workers. Results - In this paper, E-Commerce Evaluation Model with financial and non-financial perspectives shows the possibility to be criteria in the case of measuring business model. Moreover, it gives the positive expectation to be successful criteria. But the research may have ambiguity in its essential concept because it cannot avoid the limitation in selecting evaluation tools from merely the model. It is impossible to exclude the possibility in omitting specific properties which may take place in actual case study. Therefore, In hereafter research, it is necessary to include actual case study research in selecting evaluation tools in order to improve the limit point. Actual measurement items which are derived from actual case study should be subdivided, and it would be more effective to complete the research. Conclusions - In rapid change in business models, there are various kinds of business models. But it is general situation that companies which adopted business models have not brought in revenue. For this reason, E-Commerce Evaluation Model is needed as an important factor for the structuring of the e-commerce success. Although it has the limitation in selecting evaluation tools from model, E-Commerce Evaluation Model proposes the implication for measuring business models as a valuable criteria.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.87-96
• /
• 1998

The bending performances were evaluated at the radiata pine plywood through veneer compositions encompassing veneer quality, ply-numbers and overlays of the high density- or medium density-phenol resin impregnated sheets (hereafter abbreviated as resin sheets) on the raw plywood. In addition, a prediction on the bending MOE of veneers and plywoods was carried out by the nondestructive testing with stresswave timer. The summarized results were as follows: I. Bending strength and bending MOE of resin sheets-overlaid plywoods in parallel surface grain direction through 5 and 7ply were increased by 13 to 45% and 17 to 34%, respectively. Resin sheets-overlay occurred an increasing effect of the strength efficiency i.e. strength perpendicular-to-grain direction versus that parallel-to-grain direction, showing the phenomenon that the plywood strength becomes greater at the perpendicular-to-grain direction of 7ply than at that of 5ply. Displacement at bending failure had a greater trend at 7ply than at 5ply, and was decreased by resin sheets-overlay. 2. After the nondestructive bending MOEs were measured for individual veneers, these veneers were rearranged in plywood-manufacture. In these plywoods, including resin sheets-overlay, the actual MOE was predictable with feasibility of $R^2$=0.53, and also the nondestructively-evaluated MOE was lower by 20% in raw plywood, and higher 20% in LVL than actual bending MOEs.