• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.877-886
• /
• 2019

The size of the subway entrance should be calculated according to the user's demand, but Korea has the same size for each entrance by applying a uniform value. Recently, the installation of mobile convenience facilities such as escalators, elevators, etc. is mandated by the traffic weakness promotion law, but it is inconvenient to use the existing stations because it is mainly arranged in the place where it can be installed regardless of user demand. This study aims to establish a model for estimating the size of mobile convenience facilities by predicting the use demand of each station entrance so that the location and size of mobile facilities can be reflected in the design or construction of the station. To this end, a multiple regression model was established to forecast daily demand by utilizing the demand for getting on and off by station and the building association area for each purpose around the railway station. The actual data of Dongdaemun and Jonggak Stations were used to verify the estimated model. In addition, the escalator installation scale was compared / analyzed by doorway using domestic and overseas escalator equations. As a result, it was more accurate to estimate the usage demand for a single station. Also, Jonggak Station has an up and down escalator installed at exit 1, but it was analyzed that it is appropriate to install at exit 4. This study is an advanced form of the essay model for estimating the users of the entrance and exit users of urban railway stations published in 2018. In addition, it seems to be the basis of the current escalator installation criteria.

• Journal of the Korea Society for Simulation
• /
• v.28 no.4
• /
• pp.57-65
• /
• 2019

Recently, the Korean military has been drastically reducing its active-duty troops due to rapid demographic changes and the reconciliatory mode between the two Koreas. Under these circumstances, the wartime reserve forces play an important role. In times of war, a successful personal mobilization is critical especially in early combat stage. Previous research has been carried out using insufficient data collected only within the military and there have been limitations on empirical analysis due to changes in the designation methods for personal mobilization. This study analyzes how much of the reserve forces can be filled at the prescribed time by analyzing the transportation route of the reserve forces in wartime by utilizing military-related data and credit card usage data of the reserve forces residing in Yong-in city. The analysis showed that all reserve forces could not be called up within the prescribed time. In particular, Gangwon Province has shown results of less than 70 percent call-ups, and could cause serious weakening of combat capabilities in the early stages of the war. The main reasons could be the difference between the actual residence and the residence address and the excessive time caused by the traffic congestion.

• Composites Research
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2000

During the compression molding process of the continuous fiber-reinforced polymeric composites, two main problems such as fiber-matrix separation and fiber orientation are produced by the difference of flow velocity. Molded parts are lead to be nonhomogeneous and anisotropic. As the mechanical property of the products are dependent on the separation and orientation, it is important to research the fiber mat structure and molding condition. If the fiber mat structure is changed by the increment of needling, the separation decreases and after compression molding the orientation is easily aligned. As it were, the compression moldability is good. But the defects as tears, thin thickness are produced in the products. Therefore, it is important to clarify the moldability in relation to the usage of products and the expenses of produce on the actual process. Therefore we must make the measurement methods that can define the moldability of products. In this research, the effects of the fiber mat structure(NP = 0, 5, 10, 25, 50 punches/$cm^2$) and the mold geometry($r_p$ = 1, 25, 50 mm) on the moldability of products were discussed. We investigated the case of one-dimensional flow in order to obtain the degree of nonhomogeneity and the fiber orientation function. In result, we could gain the correlation coefficient of the continuous fiber-reinforced polymeric composites. Also we experimented on the cup-type compression molding which was appeared the wrinkle on the flange part by the complex stress condition in order to gain the degree of nonhomogeneity and area ratio. In result, the moldability of products was expressed as the correlation coefficient and area ratio.

• Journal of Environmental Health Sciences
• /
• v.34 no.1
• /
• pp.27-33
• /
• 2008

In order to evaluate the magnetic field (MF) exposure level in residential areas near high voltage power lines, this research measured MF levels at 120 sites near high voltage transmission lines in the Busan region, Gwangju region, Daegu region and Changwon region from July to December, 2005, and compared and analyzed the efficiencies by measuring and applying the MF emission levels of underground cables and high voltage transmission lines. As a result of the investigation of the MF exposure level by the building usage, the average MF level of 17 locations at schools was $2.44{\pm}2.45mG;$ that of 10 locations at hospitals $6.21{\pm}12.39mG;$that of 76 locations at apartments $2.55{\pm}2.98mG;$ and that at kindergartens and infant houses $3.32{\pm}4.21mG$. MF exposure was analysed as a function of distance from the source and the MF levels directly below a source were $5.15{\pm}8.72mG$, those within 30 m were $3.10{\pm}3.32mG$, while those within 50 m were $2.45{\pm}2.38mG$, and within 100 m were $0.71{\pm}0.93mG$. In order to determine the difference of MF levels by the actual distance from high voltage transmission line within the same building, the evaluation of the floor position and the MF level has shown that the MF levels were highest in the order of roof, 4th floor, 3rd floor, 2nd floor and 1st floor. Comparison of MF emission intensity of underground cables and high voltage transmission lines, has shown that underground cables have an 86-94% of reduction ratio in MF compared to high voltage transmission lines, thus demonstrating higher efficiency.

• Journal of Korea Water Resources Association
• /
• v.45 no.11
• /
• pp.1143-1156
• /
• 2012

One of the important purposes of most water resources systems is to prevent from drought damages. However, there are uncertainties in water supply plans from a reservoir due to factors such as limitation of available data, inaccuracy of surveyed data, unsuitability of analysis method, and climate change. In actual operating process, severe drought exceeding the water supply capability makes the normal water usage difficult. In Korea, however, alternative water source such as a development of new water project is very limited in case of water shortages due to drought. Especially, since there is no standard to evaluate the water supply effect considering severe drought damages, it is difficult to prepare the practical measures. In this study, water shortage events of existing multipurpose reservoirs are analyzed and the method of using low-storage emergency water supply is studied by using Water Shortage Index (WSI). The water shortage events are analyzed and the effect of water shortage decrease is evaluated using the existing inflow data of multi-purpose reservoirs. The results show that Imha, Daechung, Hapchon and Namkang reservoirs are highly vulnerable to the severe drought and required to develop additional emergency water source.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1235-1243
• /
• 2012

This study was attempted in order to offer basic data for performing systematic and desirable task through improving job by surveying the actual condition and the task weight in dental hygienists. As a result of analyzing daily task weight in subjects of this study, the ratio of medical-cure cooperation task was indicated to be highest with 35.45%. It was indicated to be in order of periodontal therapy service with 21.54%, of administration & management task with 16.08%, of oral health education task with 15.88%, and of preventive treatment service with 11.23%. As for kind-based utilization ratio of the oral health education contents and oral health education data, a toothbrushing education method by subject was indicated most highly with 3.70 points. It was indicated to be in order of usage on oral hygiene device with 3.51 points, of educational method on regular check-up with 3.26 points, of educational method of preventing dental disease with 3.13 points, and of educational method on diet control with 1.39 points. Jaw-plate model was indicated to be used the most with 38.0%. It was indicated to be in order of orally explaining with 23.9% and of camera inside the mouth with 12.2%. Thus, establishment of a system is considered to be necessary in order to promote quality of oral health education for patients in the future by performing diverse programs with high utilization value in addition to a steady interest.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.4
• /
• pp.211-215
• /
• 2013

Partial discharge diagnosis techniques using ultra high frequencies do not affect load movement, because there is no interruption of power. Consequently, these techniques are popular among the prevention diagnosis methods. For the first time, this measurement technique has been applied to the GIS, and has been tested by applying an extra high voltage switchboard. This particular technique makes it easy to measure in the live state, and is not affected by the noise generated by analyzing the causes of faults ? thereby making risk analysis possible. It is reported that the analysis data and the evaluation of the risk level are improved, especially for poor location, and that the measurement of Ultra high frequency (UHF) partial discharge of the real live wire in industrial switchgear is spectacular. Partial discharge diagnosis techniques by using the Ultra High Frequency sensor have been recently highlighted, and it is verified by applying them to the GIS. This has become one of the new and various power equipment techniques. Diagnosis using a UHF sensor is easy to measure, and waveform analysis is already standardized, due to numerous past case experiments. This technique is currently active in research and development, and commercialization is becoming a reality. Another aspect of this technique is that it can determine the occurrences and types of partial discharge, by the application diagnosis for live wire of ultra high voltage switchgear. Measured data by using the UHF partial discharge techniques for ultra high voltage switchgear was obtained from 200 places in Gumi, Yeosu, Taiwan and China's semiconductor plants, and also the partial discharge signals at 15 other places were found. It was confirmed that the partial discharge signal was destroyed by improving the work of junction bolt tightening check, and the cable head reinforcement insulation at 8 places with a possibility for preventing the interruption of service. Also, it was confirmed that the UHF partial discharge measurement techniques are also a prevention diagnosis method in actual industrial sites. The measured field data and the usage of the research for risk assessment techniques of the live wire status of power equipment make a valuable database for future improvements.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.1
• /
• pp.133-146
• /
• 2015

Ever sophisticated e-finance fraud techniques have led to an increasing number of reported phishing incidents. Financial authorities, in response, have recommended that we enhance existing Fraud Detection Systems (FDS) of banks and other financial institutions. FDSs are systems designed to prevent e-finance accidents through real-time access and validity checks on client transactions. The effectiveness of an FDS depends largely on how fast it can analyze and detect abnormalities in large amounts of customer transaction data. In this study we detect fraudulent transaction patterns and establish detection rules through e-finance accident data analyses. Abnormalities are flagged by comparing individual client transaction patterns with client profiles, using the ruleset. We propose an effective flagging method that uses decision trees to normalize detection rules. In demonstration, we extracted customer usage patterns, customer profile informations and detection rules from the e-finance accident data of an actual domestic(Korean) bank. We then compared the results of our decision tree-normalized detection rules with the results of a sequential detection and confirmed the efficiency of our methods.

• The Journal of the Korea Contents Association
• /
• v.17 no.7
• /
• pp.283-293
• /
• 2017

This study analyzed the actual conditions of use of public sports facilities and characteristics of the users of the facilities through surveys and measured the spatial imbalance of the public sports facilities currently supplied by using gravity potential model. This study also suggests evaluation criteria that may be considered for efficient location selection by examining the change of accessibility to the facilities that meet the needs of users in the future. As the results of the questionnaire survey, unlike current usage, the users hoped for badminton, weight training and swimming. And we could confirm the demand for the expansion of the multi - purpose indoor gym which can carry out such activities in the areas. As the result of the analysis on the difference in accessibility of the public sports facility, there were some large variations in the regions. It was found that a balanced supply of facilities was needed in terms of equity. In particular, when analyzing by considering the population estimates of 2025, It is analyzed that the accessibility will be reduced to about 60% compared to that of 2015. In addition, it is evaluated as the best alternative in terms of overall efficiency that the location of the facilities should be in Munsan area where population growth is expected in the future.

• The KIPS Transactions:PartC
• /
• v.12C no.1 s.97
• /
• pp.121-128
• /
• 2005

Tho existing TCP(Transmission Control Protocol) is known to be unsuitable for a network with the characteristics of high RDP(Bandwidth-Delay Product) because of the fixed small or large buffer size at the TCP sender and receiver. Thus, some trial cases of adjusting the buffer sizes automatically with respect to network condition have been proposed to improve the end-to-end TCP throughput. ATBT(Automatic TCP fluffer Tuning) attempts to assure the buffer size of TCP sender according to its current congestion window size but the ATBT assumes that the buffer size of TCP receiver is maximum value that operating system defines. In DRS(Dynamic Right Sizing), by estimating the TCP arrival data of two times the amount TCP data received previously, the TCP receiver simply reserves the buffer size for the next arrival, accordingly. However, we do not need to reserve exactly two times of buffer size because of the possibility of TCP segment loss. We propose an efficient TCP buffer tuning technique(called TBT-PLR: TCP buffer tuning algorithm based on packet loss ratio) since we adopt the ATBT mechanism and the TBT-PLR mechanism for the TCP sender and the TCP receiver, respectively. For the purpose of testing the actual TCP performance, we implemented our TBT-PLR by modifying the linux kernel version 2.4.18 and evaluated the TCP performance by comparing TBT-PLR with the TCP schemes of the fixed buffer size. As a result, more balanced usage among TCP connections was obtained.