• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.707-710
• /
• 2011

System safety is defined as the state where the hazard risks due to internal system, interface, operation and maintenance are controlled as acceptable levels. It is represented and evaluated either with the risk level of each risk factor with the consideration of operation environments or with Safety Integrity Level (SIL) which is the system functional safety without considering application environments. The assessment results are issued in forms of certificates and they are reused in many cases. However, the conditions and restrictions for different application environments vary in each case, therefore, additional evaluation on the preconditions of assessment in comparison with the actual application environment must be carried out. For the area of train control, TR 50506-1 has been established based on the IEC 62425 (international standard for safety of train control system by RSSB) and EN 50129 (Europe standard) for the further assessment. In this paper, the analysis on TR 5056-1 has been conducted in depth. The purpose of the study is to determine the requirements for inter-acceptability including scope, procedures, principles, examination and suitability. The results can be utilized for the system safety maintenance when new devices or components are introduced in conventional systems.

• Journal of ILASS-Korea
• /
• v.25 no.4
• /
• pp.188-195
• /
• 2020

To meet stringent emission regulations of automotive engines, fuel injection control techniques have advanced based on reliable and fast computing prediction models. This study aims to develop a reliable lightweight prediction model of fuel injection rates using a small number of input parameters and based on simple fluid dynamic theories. The prediction model uses the geometry of the injector nozzle, needle motion data, injection conditions and the fuel properties. A commercial diesel injector and US No. 2 diesel were used as the test injector and fuel, respectively. The needle motion data were measured using X-ray phase-contrast imaging technique under various fuel injection pressures and injection pulse durations. The actual injector rate profiles were measured using an injection rate meter for the validation of the model prediction results. In the case of long injection durations with the steady-state operation, the model prediction results showed over 99 % consistency with the measurement results. However, in the case of short injection cases with the transient operation, the prediction model overestimated the injection rate that needs to be further improved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1423-1432
• /
• 2011

Since the marine accidents increase with the increased volume of traffic, preventive surveillance technology for safety navigation of the ships before the accident is being emphasized to secure the safety at sea along with post-accident measures. This paper aims to suggest a design based on an integrated safety management platform systems to support nautical safety, implements of bridge operation terminal equipments and alarm system for bridge watch monitoring and abnormal state of navigation/propulsion/machinery/power, and performs a quality evaluation for the actual boarding on the ship based on the classification standards.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.1
• /
• pp.22-31
• /
• 2014

Military UAV(Unmanned Aerial Vehicle) operated as a RC(Remotely Control) model level within the limit of the military special use airspace until now. However, the high and medium altitude of URA(Unmanned Reconnaissance Aircraft) which the ROKAF have been trying to import recently is at the UAV level and needs the criteria for the classified airspace flights. The required flight criteria includes operator location, mission operation limit, equipment, etc., which are the principle and standard applied based on the airspace use for UAV. Also, the general flight rules, visual flight rules, instrument flight rules are required in order to have to be applied to the actual flight. Besides, an appliance regulation needs to be arranged regarding two-way communication, ATC and communication issue, airspace and area in-flight between UAS( Unmanned Aircraft System) users. An operation of the UAV in the air significantly requires the guarantee of the aircraft's capacity, and also the standardized flight criteria. A safe and smooth use is ensured only if this criteria is applied and understood by the entire airspace users. For the purpose, a standardized military UAV flight operations criteria that is to be applied for each airspace by UAV is to be prepared through analysis of the present state, a legend UAV system, and a special character analysis.

• Journal of the Korean Society of Safety
• /
• v.28 no.5
• /
• pp.10-14
• /
• 2013

This paper is aimed to investigate the actual conditions of standalone PV(Photovoltaics) streetlight in public place and analyze cause of failure and derive the method of decrease for standalone PV streetlight. The cost of installing standalone PV streetlight in a public for the safety and convenience of life is expensive(300 million won per unit). Management of standalone PV streetlight is important because it is operating system itself, after installation, but concern degree of management is very low and development of technology has not been done. Accordingly, standalone PV streetlight in public place is not operate in night, this phenomenon is lasted for several days to months. Therefore this study, for standalone PV streetlight constantly to keep the normal operation, investigation conducted to check status of standalone PV streetlight(50 units), the voltage of the main parts and analyze the cause of the failure. In addition, the improvement of standalone PV streetlight is suggested by using FTA(fault tree analysis).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.8
• /
• pp.2473-2489
• /
• 2022

Urban development has brought about the increasing saturation of urban traffic demand, and traffic congestion has become the primary problem in transportation. Roads are in a state of waiting in line or even congestion, which seriously affects people's enthusiasm and efficiency of travel. This paper mainly studies the discrete domain path planning method based on the flow data. Taking the traffic flow data based on the highway network structure as the research object, this paper uses the deep learning theory technology to complete the path weight determination process, optimizes the path planning algorithm, realizes the vehicle path planning application for the expressway, and carries on the deployment operation in the highway company. The path topology is constructed to transform the actual road information into abstract space that the machine can understand. An appropriate data structure is used for storage, and a path topology based on the modeling background of expressway is constructed to realize the mutual mapping between the two. Experiments show that the proposed method can further reduce the interpolation error, and the interpolation error in the case of random missing is smaller than that in the other two missing modes. In order to improve the real-time performance of vehicle path planning, the association features are selected, the path weights are calculated comprehensively, and the traditional path planning algorithm structure is optimized. It is of great significance for the sustainable development of cities.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.3
• /
• pp.123-128
• /
• 2022

A lot of research is being done to develop a high-efficiency heat pump to save energy, and research to reduce or eliminate the phenomenon of frost occurring in the outdoor unit coil is also being conducted at the same time. In order to conduct a study that does not cause frost on the outdoor unit of the heat pump regardless of the season, a constant temperature chamber like a general room that can be tested under the same conditions as in the natural state was built. The experiment was conducted by providing an environment similar to the natural state to the outdoor unit of the heat pump installed in the constant temperature chamber. As a result, the lower the outdoor temperature, the lower the efficiency of the heat pump. It wat confirmed that the lower the value, the longer it is.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1C
• /
• pp.94-101
• /
• 2008

In this paper, we introduce a real-time state-of-polarization(SOP) finding system. The system divides the optical wave into linear horizontal- and vertical-SOP components and measures two different beat-signals, which are produced by superposition with reference optical source, in time domain. From these measured beat signals we can get SOP information of the signal instantly. Since the proposed scheme is a feed-forward measurement system, comparing with conventional systems which require an optical feedback loop, the measurement time becomes reduced tremendously. We also introduced a novel calibration method for compensating birefringence-related errors which may occur during the measurement. We prove the operation and performance of the proposed system through computer simulation and actual experiments.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.3
• /
• pp.37-44
• /
• 2012

In this paper, the application of robust fuel gauge algorithm in the external environment to general fuel gauge system is proposed. The proposed fuel gauge system is composed of two modules which are Moving Average Filter (MAF) and Inclination Filter (IF). They are used to show correctly the amount of fuel in the external environment which are curve road, slope or acceleration/deceleration driving. In parallel, verification and validation processes using Software In the Loop Simulation (SILS) in personal computer and Hardware In the Loop Simulation (HILS) similar to actual vehicle environments are established. Through this research, it turned out to be possible to operation of gauge become correct of external environment.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.1
• /
• pp.41-47
• /
• 2020

The contribution of damage mechanisms to failure of steam turbine casing made of Cr-Mo-V steel was investigated. Creep-fatigue interaction on the HP side corner of turbine casing was revealed as the root cause of the catastrophic failure performed by metallurgical analysis. The steady-state pressure and transient thermal stress were analyzed based on the actual operating condition of the thermal plant. Damage of creep-fatigue interaction to crack initiation was evaluated with multiaxial effects. The contribution ratio of creep and fatigue to the crack initiation was estimated to 3:1. Temporary geometrical correct action with repair weld was executed. For long-term operation, design improvement of casing equipment for creep resistance should be needed.