• 대한전기학회논문지
• /
• 제39권6호
• /
• pp.557-567
• /
• 1990

This paper describes the static and dynamic characteristic analysis of the Series Resonant DC to DC Converter with frequency control. The natural commutation of all switch element is realized when the switching frequency is below the resonant frequency of the tank circuit, and the analysis is limited to only this region. For the analysis method, state plane technique is adopted, and each operation mode is defined from normalized switching frequency Fsn. Under this condition, circuit performance is analyzed ideally. The physical characteristics of the series resonant converter is easily grasped by this analysis method with frequency control and this analytical results are directly applicable to the actual converter design. The validity of the analysis is verified by comparing with experimental results and the stability of the converter is confirmed against small variations around the operating point by conventional frequency domain analysis.

• 정보관리학회지
• /
• 제22권3호
• /
• pp.55-70
• /
• 2005

본 연구는 기록물의 중시국으로서, 우리나라에서의 대학기록물 관리업무가 현재 어느 수준으로까지 발전해 있는가를 규명하기 위해 시작된 것이다. 이를 위해 수행한 국내 전 대학을 대상으로 한 기록물관리 업무의 설치와 운용에 관한 조사결과 매우 저조한 수준에 이르고 있음을 확인하였다. 기록물관리를 독립된 업무로 수행하고 있는 대학은 전 대학의 20%수준이며, 대학별로 차별화된 특별 방법에 의해 기록물자료를 운용 혹은 활용하고 있는 대학은 한 건도 없었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1018-1020
• /
• 2000

In the operation and maintenance activity of hydro turbine generator, one of the important parameters is the efficiency. This study analyze the case of efficiency management by pressure time method and survey the application of this method through the actual test. And it is confirmed that the Pressure time method exccesively limit the general condition to be applied. If index method is used for efficiency management because the index method calibrated by absolute discharge(by flow of pressure time method) is very accurate. it make to be able to manage the realtime efficiency.

• 동력기계공학회지
• /
• 제16권6호
• /
• pp.86-91
• /
• 2012

A multi purpose environmental monitoring system has been developed as a commercially available standard using the techniques which are FBG(Fiber Bragg Grating), Hetero-core spliced fiber optic sensor and etc, for the purposes of monitoring large scaled structures and preserving natural environments. The monitoring system has been tested and evaluated in a possible outdoor condition in view of the full scaled operation at actual sites to be monitored. Additionally, the developed systems in the previous works conveniently provided us with various options of sensor modules intended for monitoring such physical quantities as displacement, distortion, pressure, binary states, and liquid adhesion. In this paper, we extend the previous results to a water leakage detection problem and develop a sensing system as a result. By the experimental study, it is verified that multi-point leakage detection is possible using single line optical fiber.

• 전산구조공학
• /
• 제9권1호
• /
• pp.47-54
• /
• 1996

원자로 내부구조물을 구성하고 있는 중요한 구조물 중의 하나인 제어봉집합체 보호구조물에 대한 랜덤진동의 응답을 구하였다. 제어봉집합체 보호구조물은 본래의 설계로부터 많은 설계변동이 있었고 이에 대하여 많은 우려가 제기되었던 바 본 논문에서는 정상상태에서의 랜덤하중에 대한 동적해석을 수행하여 그 응답을 구하였고 이들을 실험치와 비교, 검토하였으며 제어봉집합체 보호구조물이 구조적으로 안전함을 보였다.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2385-2390
• /
• 2009

Based on the detailed analysis of output characteristics of PV array and residential load usage pattern, a design method to calculate optimal battery capacity for stand-alone PV generation systems is proposed. And also, according to power flow Actual irradiation and temperature data are analyzed to compose a PV array simulator and also six representative home appliances are electrically modeled for load simulator, along with 24hours usage pattern. The surplus and insufficient power can be calculated from the proposed simulation platform, so that selection of an optimal battery capacity can be possible. The theoretical analysis and design process will be explained, along with informative simulation results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.113-118
• /
• 2011

Many kinds of dynamic absorbers have been used to reduce the vibration of machineries and structures. In the typical ones, however low damping capacity, durability and limited install condition restrict their application. In this study, high damped dynamic absorber was proposed for diesel generator set. Developed absorber is composed with mass and coil springs. Silicone oil was filled inside the narrow gap between mass and casing. Viscous damping of silicon oil act as additional damping so that proposed dynamic absorber is suitable for D/G set which have adjacent resonance frequency to operation speed. The performance of the dynamic absorber was confirmed through the actual test on diesel engine generator set.

• 한국항공운항학회지
• /
• 제26권4호
• /
• pp.101-109
• /
• 2018

In order to predict the future needs of the aircraft repair parts, each military group develops and applies various techniques to their characteristics. However, the aircraft and the equipped weapon systems are becoming increasingly advanced, and there is a problem in improving the hit rate by applying the existing demand prediction technique due to the change of the aircraft condition according to the long term operation of the aircraft. In this study, we propose a new prediction model based on the conventional time-series analysis technique to improve the prediction accuracy of aircraft repair parts by using machine learning model. And we show the most effective predictive method by demonstrating the change of hit rate based on actual data.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.215-224
• /
• 2005

It is a fundamental requirement for the medium-sized manufacturing company with multiple-types of products and mixed process flows to have a real time feedback system for systematic production scheduling and process control to maximize the productivity and delivery achievement. However it is very inferior in actual condition to make infrastructure for a systematic production scheduling and process control in middle-sized manufacturing company, Proposed in this paper is an MES implementation approach for the successful construction of MES infrastructure, implementation and operation in medium-sized manufacturing companies with multiple-types of products and mixed process flows.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.261-264
• /
• 2006

In this paper, doubly-fed induction-type wind power generation system simulation model for grid connection is developed. The simulation model is based on PSCAD/EMTDC and consists of rotor-blade, blade controller, generator power converter and generator controller Blade controller controls the blade pitch angle for starting, peak power limiting and emergency condition. Generator controller controls the generator output power to maximize the system efficiency. Simulation results are shown for the variable wind speed conditions. The simulation model can be utilized for study of actual interaction between wind turbine and grid for reliable operation and protection of power system.