• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 춘계학술발표회 논문집
• /
• pp.37-44
• /
• 2003

The aim of this research was performance of Web-based real time DGPS using MS visual basic 6.0 Active X control. This system supported the navigation of rover by transmitting the DGPS correction information of base station via internet and monitored the moving of rover by displaying the corrected results received from rover as well as permitting Web users monitoring for rover. The Web-based DGPS server and the client system using MS visual basic 6.0 Active X control for DGPS displayed on Web-browser with the pre analysis was constructed and the system loading test via Web-browser was performed after debugging this system through the static GPS test and publishing it on Web. Also, the wireless internet DGPS test on Web by changing the distance between a base station and a rover was carried out. As the result of the test, the real time DGPS could be performed by transmitting the correction message which calculated from the server system to the client system continually. The rover could be managed by displaying the location information which received from the client system. Other users also could monitor the rover by connecting with this system via internet in real time.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.121-124
• /
• 2004

In this paper, we address an active vibration control system, which suppresses the vibration engaged by magnetically levitated stage. The stage system consists of a levitating platen with four permanent magnetic linear synchronous motors in parallel. Each motor generates vertical force fer suspension against gravity and propulsion force horizontally as well. This stage can generate six degrees of freedom motion via the vertical and horizontal forces. In the stage system, which represents the settling-time critical system. the motion of the platen vibrates mechanically. We designed an active vibration control system for suppressing vibration due to the stage moving. The command feedforward with inertial feedback algorithm is used fer solving stage system's critical problems. The components of the active vibration control system are accelerometers for detecting stage table's vibrations, a digital controller with high precise signal converters, and electromagnetic actuators.

• 한국기계기술학회지
• /
• 제13권2호
• /
• pp.45-54
• /
• 2011

A vehicle suspension system performs two functions, the ride quality and the stability, which conflict with each other. Among the various suspension systems, an active suspension system has an external energy source, from which energy is always supplied to the system for continuous control of vehicle motion. In the process of the linearization for the nonlinear active suspension system, the frequency dependent damping method is used for the exact modelling to the real model. The pressure control valve which is controlled by proportional solenoid is the most important component in the active suspension system. The pressure control valve has the dynamic characteristics with 1st order delay. Therefore, It's necessary to adopt the lead compensator to compensate the dynamics of the pressure control valve. The sampling time is also important factor for the control performances. The sampling time value is proposed to satisfy the system performances. After the modelling and simulation for the pressure control valve and vehicle dynamic, the performances of the vehicle ride quality and the stability are enhanced.

• 센서학회지
• /
• 제13권2호
• /
• pp.144-151
• /
• 2004

In this paper, we propose an active stereo surveillance system with human-like convergence function. The proposed system uses a bottom-up saliency map model with the human-like selective attention visual function to select an interesting region in each camera. and this system compares the landmarks whether the selective region in each camera finds a same region. If the left and right cameras successfully find a same landmarks, the implemented vision system focuses on the landmark. Using the motor encoder information, we can automatically obtain the depth information and resultantly construct a depth map using the depth information. Computer simulation and experimental results show that the proposed convergence method is very effective to implement the active stereo surveillance system.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권7호
• /
• pp.903-908
• /
• 1999

In this paper, it is proposed the phase shifter array active system to receive digital satellite broadcasting for vehicle. To receive satellite broadcasting data in vehicle, it is inevitable to have active antenna system, which traces the satellite in real time. Also if it is used in vehicle, it must be thin and light structure. To develop this type of antenna system, several techniques should be integrated properly. These are the design and manufacturing technique of high gain antenna, algorithm for tracking satellite and its manufacturing technique, controller design and manufacturing technique, system integration technique and so on. The validity of the proposed AVDBS system was confirmed by simulation and experimental results.

• 한국전자파학회논문지
• /
• 제13권2호
• /
• pp.115-122
• /
• 2002

본 논문에서는 고속수통방식과 능동방식 ETC 시스템간 호환의 필요성에 따라 두 시스템의 주파수 대역 호환 방안을 제안한다. 현재 TTA에서 DSRC 시스템을 능통 방식으로 표준화 작업을 진행중이다 그러므로 현재 시범운용중인 고속수통방식 ETC 시스템과 아직 미개발 상태인 능통방식 ETC 시스템간 호환의 필요성이 제기된다. 그래서 기존의 고속수동방식 ETC 시스템의 성능을 저하시키지 않으면서 능통방식과 유사한 주파수 대역을 사용학 수 있는 방안(Direct Conversion Method)을 제안하고, 시뮬레이션을 통하여 기존 방식과의 차이를 확인할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.647-650
• /
• 2004

The modeling of an active vibration isolation system is accomplished by using the equivalent spring constant, mass and rotational Inertia of each component. The detailed model of the actuation module is successful for describing its frequency-domain performance but also too complicated to implement it to actual system for control so that the order of the model is reduced up to the degree that preserves its characteristic in the low frequency range. The reduced model is suitable for identifying the unknown system parameters such as damping constants of components. The overall isolation system is described by using the reduced model of the actuation module. The accurate model ing and system parameter identification that is essential for the control of the active vibration isolation system is attained successfully.

• 지구물리
• /
• 제9권3호
• /
• pp.219-230
• /
• 2006

Since the key issue that 'the Yangsan fault is seismically an active fault" was raised in 1983, thegeological and geomorphological studies of active fault have been made by many researchers. These studies are mainly focused on the Yangsan fault system(YFS) and Ulsan fault system(UFS) due to many historical earthquakes occurred in this area. There are two different types of active faultings under the ENE-WSW horizontal stress field in the southeastern part of the Korean Peninsula. The NNE-trending YFS is the most prominent right-lateral strike-slip fault and has a continuous trace about 200 km long. Some part of this system has been active during the late Quaternary with evidences clearly recognized on both the northern (Yugyeri and Tosung-ri areas) and southern parts (Eonyang to Tongdosa area) of the YFS. in the southern part, the estimated vertical slip rate is about 0.02 - 0.07 mm/yr, and the lateral slip rate may be several times larger than the vertical rate. The most recent event occurred prior to deposition of Holocene alluvium, in the northern part, the fault trend locally changes to almost N-S, dips to the east and has reverse movement. The average vertical slip rate is estimated to be less than 0.1 mm/yr. The most recent event probably occurred after 1314 years BP (AD 536). The NNW-SSE (or N-S) trending UFS is a predominantly reverse fault that built up U-ie eastern mountain and has been active during U-ie late Quaternary. The fault trace is not straight but irregularly undulates along the foot of the mountain on the east. From the disturbed terraces along U-ie fault, the average vertical slip rate on U-iis system is estimated to be about 0.08.13mm/yr. The latest event is not well studied, but seems to have occurred after the last glacial maximum in the Malbang fault and 14,000 years BP in the Kalgok fault of the UFS. However, important issues such as fault segmentation, recurrence interval, age of Quaternary deposits need further studies.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.278-281
• /
• 2003

The focus of this research is to realize the function which is equivalent to the active suspension system, with controlling semi-active suspension through the attenuation of power variable damper in lower cost and smaller energy. Actually some semi-active suspension systems have been adopted, but they are not sufficient in performance. The authors intended to develop more effective and practical system and applied the optimal control technique. The results of experiments with practical suspension system showed a degree of improvement of comfortableness.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 1999년도 춘계공동학술대회-지식경영과 지식공학
• /
• pp.95-102
• /
• 1999

The web-based group collaborative systems are emerging as enterprise-wide information systems. Since data in group collaborative systems are apt to be shared among multiple concurrent users and modified simutaneously by them, the web-based group collaborative systems must support synchronous collaboration in order to provide users with synchronized and consistent views of shared data. This paper proposes an active web server which can facilitate synchronous collaboration in web-based group collaborative systems. To accomplish such a goal, the active web server manages dependency relationships between shared data and web browsers referencing them and actively propagates changing details of the shared data to all web browsers referencing them. And, this paper examines usefullness and effectiveness of the active web server to apply it to the ball-bearing design example of concurrent engineering design systems. The prototype system of the active web server is developed on a commercial Object-oriented Database Management System (ODBMS) called OBJECTSTORE using the C++ programming language.