• Fashion & Textile Research Journal
• /
• v.17 no.4
• /
• pp.604-612
• /
• 2015

This study investigates preferred bicycle wear designs that can satisfy active senior consumers. A survey was conducted on 50-60's women who periodically rode bicycles. The results indicated a preference for slim designs and red colors. Jacket designs preferences were for a tight fit for size tolerance, stand collar style, and elastic band details for cuff styles. Pants design preferences were for a whole band waist belt type with a tight fit style such as leggings in pants silhouette, zipper details on the side line and ankle length. They also preferred styles with pads attached to underpants in the pad style and the part of the back waist in the pocket position. The survey showed four kinds of jacket design drawings on an ordinal scale rating. Results indicated a preference for set-in variation jackets with the red and gray color combination. Finally, we demonstrated bicycle wear design suggestions. The jacket applied different armhole line colors connected to the sleeve to make the waist slimmer; in addition, stretchable material helped improve armpit part functionality.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.10
• /
• pp.31-39
• /
• 2009

This paper presents the single supply power line communication(PLC) SoC ASIC with built-in analog frond-end circuit. To achieve the low power consumption along with low chip cost, this PLC SoC ASIC employs fully CMOS analog front-end(AFE) and several built-in Regulators(LDOs) powering for Core logic, ADC, DAC and IP Pad driver. The AFE includes RX of pre-amplifier, Programmable gain amplifier and 10 bit ADC and TX of 10bit Digital Analog Converter and Line driver. This PLC Soc was implemented with 0.18um 1 Poly 5 Metal CMOS process. The single power supply of 3.3V is required for the internal LDOs. The total power consumption is below 30mA at standby and 300mA at active which meets the eco-design requirement. The chips size is $3.686\;{\times}\;2.633\;mm^2$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.199-207
• /
• 2011

A Ku-band low noise amplifier has been designed and fabricated by using 0.25 um SiGe BiCMOS process. The developed Ku-band LNA RFIC which has been designed with hetero-junction bipolar transistor(HBT) in the BiCMOS process have noise figure about 2.0 dB and linear gain over 19 dB in the frequency range from 9 GHz to 14 GHz. Optimization technique for p-tap value and electro-magnetic(EM) simulation technique had been used to overcome the inaccuracy in the PDK provided from the foundry service company and to supply the insufficient inductor library. The finally fabricated low noise amplifier of two fabrication runs has been implemented with the size of $0.65\;mm{\times}0.55\;mm$. The pure amplifier circuit layout with the reduced size of $0.4\;mm{\times}0.4\;mm$ without the input and output RF pads and DC bais pads has been incorporated as low noise amplication stages in the multi-function RFIC for the active phased array antenna of Ku-band satellite VSAT.

• The Journal of Internal Korean Medicine
• /
• v.43 no.4
• /
• pp.606-624
• /
• 2022

Objective: The aim of this study was to compare the effects of different doses of Geumnyeonyijin-tang (GNYJT) water extracts with those of metformin (250 mg/kg) in mild diabetic-obese mice. Methods and Results: The 48 mice were divided into 1 normal pellet diet (NFD) group and 5 high-fat diet (HFD) groups. At the end of 12 weeks of oral administration of metformin (250 mg/kg) or GNYJT water extracts (400, 200, or100 mg/kg), the effects were evaluated. The HFD control mice showed noticeable increases in body weight, adipose tissue density, fat pad weight of the periovarian and abdominal wall, and insulin, blood glucose, and HbA1c levels, with decreases in serum HDL levels. Increases in the periovarian and dorsal abdominal fat pad, regions of steatohepatitis, adipocyte hypertrophy, and hepatocyte hypertrophy were also discovered. The HFD group showed a decline in glucose levels and elevation of hepatic gluconeogenesis, suggesting an HFD-induced AMPK downregulation related to glucose dysregulation, as well as lipid metabolism related to obese insulin-resistant type II diabetes, dyslipidemia, and oxidative stress related diabetic hepatopathy (non-alcoholic fatty liver disease, NAFLD). Conclusion: Assessment of the key parameters for inhibition of diabetes and related complications in HFD-fed diabetic-obese mice demonstrated that GNYJT water extracts have favorable ameliorating effects. The effect of GNYJT was manifested through the stimulation of AMPK upregulation of related hepatic glucose enzyme activities and expression of lipid metabolism-related genes. Therefore, appropriate oral dosages of GNYJT could be promising as a new preventive candidate for controlling diabetes and related complications. Further screening of biologically active compounds, elucidation of detailed mechanisms, and more animal studies are warranted.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.30-34
• /
• 2023

Since dishing in the CMP process is a major factor that hinders the uniformity of the semiconductor thin film, many studies have focused this issue to improve the non-uniformity of the film due to dishing. In the metal layer, the dishing mainly occurs in the central part of the metal due to a difference in a selection ratio between the metal and the dielectric, thereby generating a step on the surface of the metal layer. Factors that cause dishing include the shape of the thin film, the chemical reaction of the slurry, thermal deformation, and the rotational speed of the pad and head, and dishing occurs due to complex interactions between them. This study analyzed the stress generated on the metal layer surface in the CMP process using ANSYS software, a commercial structure analysis program. The stress caused by the vertical load applied from the pad was analyzed by changing the area density and line width of the dummy metal. As a result of the analysis, the stress in the active region decreased as the pattern density and line width of the dummy metal increased, and it was verified that it was valid compared with the previous study that studied the dishing according to the dummy pattern density and line width of the metal layer. In conclusion, it was confirmed that there is a relationship between dishing and normal stress.

• Korean Journal of Pharmacognosy
• /
• v.36 no.4 s.143
• /
• pp.324-331
• /
• 2005

The roots of Rosa rugosa have been used to treat diabetes mellitus in the folkloric society of Korea. To demonstrate the active component for the rat obesity induced by high fat diet for 6 weeks, the phytochemical fractionation and the pharmacological activity test were performed on this crude drug. It was shown that the methanolic extract and its EtOAc fraction inhibited the weight increase of the rat body, abdominal fat pad and hyperlipidemia at 200 mg/kg dose. Further, the triterpenoids, euscaphic acid and tormentic acid, isolated from R. rugosa roots were active at 30 mg/kg in the same assay. The two components shifted serum total-, HDL, and LDL-cholesterol levels toward the values of the unteated group, suggesting that the active compounds has hypolipidemic effects. The rats fad euscaphic acid and tormentic acid also reduced thiobarbituric acid-reactive substance (TBARS) and hydroxyl radical in the rat blood and increased superoxide dismutase activity compared to the control. TBARS values and carbonyl contest of the hepatic protein were reduced by treatment with the two triterpenoids. Antioxidative enzyme (SOD, glutathione peroxidase, and catalase) activities in hepatic were increased by treatment of rats with the triterpenoids, which suggests that triterpenoids inhibited the reduction of hepatic antioxidative activity caused by high fat diet. Taken together, these results support that euscaphic acid and tormentic acid improve a high fat diet-induced hyperlipidemia via the activation of antioxidative mechanism.

• The Journal of Korean Physical Therapy
• /
• v.35 no.6
• /
• pp.177-184
• /
• 2023

Purpose: The purpose of this study was to compare the concurrent validity and test-retest reliability of 'KPIMT Torticollis Protractor', a smart phone and I-pad application for convenient range of motion measurement, and 'Image J', an analysis software with high reliability and validity, according to head tilt and active cervical rotation angle. This was done to determine the clinical utility of 'KPIMT Torticollis Protractor'. Methods: Head tilt and active cervical spine rotation angles of 40 children with congenital muscular torticollis were measured using Image J and KPIMT Torticollis Protractor, respectively. The level of concurrent validity and inter-rater and intra-rater reliability between the two measurement methods were analyzed. Results: For forty participants, the concurrent validity between Image J and KPIMT Torticollis Protractor showed very high validity with ICC of ICC 0.977 (0.995-0.999), 0.994 (0.994-0.998), CV_ME% 0.71-0.72%, SEM% 0.31-0.34%, MDC% 0.86-0.94%. The test-retest intra-rater reliability showed very high reliability ICC 0.911 (0.911-0.966), CV_ME% 0.71%, SEM% 0.34-0.36%, MDC% 0.81-0.94%. The test-retest inter-rater showed very high reliability ICC 0.936 (0.933-0.957), CV_ME% 0.70%, SEM% 0.34-0.35%, MDC% 0.81-0.83%. Conclusion: The KPIMT Torticollis Protractor, a smart phone and IPD application, is a highly reliable and valid device for angle measurement in children with congenital myotonia and can be easily used in clinical practice.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.05a
• /
• pp.226-234
• /
• 2002

A systematic study of the role of transfer films on friction properties was performed with various temperatures in the brake system. An NAO friction material specimens containing 9 ingredients were tested using a pad-on-disk type friction tester A new method of measuring the transfer film thickness was developed by considering the electrical resistance of the transfer film using a 4-point probe technique. The properties of transfer film such as surface morphology and film distribution vaied according to the relative amount of graphite and magnesium oxide. By using SEM, it was possible to obtain information about the chemical composition of the transfer film. Results showed that there detected a threshold value of the relative amount of a two active materials to maintain a certiain thickness of a transfer film. Results also showed that formation of friction layer generated on the friction surface was strongly affected by chemical action of two ingredients during sliding due to chemical reaction of solid lubricants at different interface temperature. The results suggested that no apparent relationship between transfer film thickness and the average friction coefficient was founded and friction characteristics were affected more by the property of the solid lubricant and abrasive in the material.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.324-329
• /
• 2010

The surroundings around subway are becoming more lively for project of CBD (an redevelopment project), however vibrations which are made through passing train cold spread buildings around. The structure-borne noise could be generated at the same time that makes people including developers and th citizens have negative viewpoint on railway. Especially, Seoul Metro 1-4 lines ar built alongside the road nearby houses and business district. That could make plenty of public resentments because of the structure-borne noise. Seoul Metro should make active alternative plans for their future urban environment projects which will be conducted. The case was Railway Facility which were conducted to minimize structure-borne noise from sharp curved track section (4 line, Sinyongsan~Ichon, R 250m). The section is adjacent to house district as near as 6.6m related with pusing international city project, the 4th urban environment project around international building, near Yongsan station. The interval of sleepers would be downsized in half with breaking existing case, and pad stiffness is reduced 4 ton from 10 ton. That makes structure-borne noise minimized because of vibrations are lowered about 19.1-23.0db. The structure above has remained for a year and a half from October, 2008, and had not any trouble to perform excellence with 80million ton rail accumulated tonnage.

• Structural Engineering and Mechanics
• /
• v.64 no.2
• /
• pp.213-223
• /
• 2017

Bridges are lifeline and integral components of transportation system that are susceptible to seismic actions, their vulnerability assessment is essential for seismic risk assessment and mitigation. The vulnerability assessment of bridges common in Pakistan is very important as it is seismically very active region and the available code for the seismic design of bridges is obsolete. This research presents seismic vulnerability assessment of three real case simply supported multi-span reinforced concrete bridges commonly found in northern Pakistan, having one, two and three bents with circular piers. The vulnerability assessment is carried through the non-linear dynamic time history analyses for the derivation of fragility curves. Finite element based numerical models of the bridges were developed in MIDAS CIVIL (2015) and analyzed through with non-linear dynamic and incremental dynamic analyses, using a suite of bridge-specific natural spectrum compatible ground motion records. Seismic responses of shear key, bearing pad, expansion joint and pier components of each bridges were recorded during analysis and retrieved for performance based analysis. Fragility curves were developed for the bearing pads, shear key, expansion joint and pier of the bridges that first reach ultimate limit state. Dynamic analysis and the derived fragility curves show that ultimate limit state of bearing pads, shear keys and expansion joints of the bridges exceed first, followed by the piers ultimate limit state for all the three bridges. Mean collapse capacities computed for all the components indicated that bearing pads, expansion joints, and shear keys exceed the ultimate limit state at lowest seismic intensities.