• Journal of KIISE:Information Networking
• /
• v.31 no.5
• /
• pp.482-489
• /
• 2004

Paging extensions for Mobile IP was proposed to avoid unnecessary registration signaling overhead of Mobile IP. In order to support the paging function in Mobile IP, the slates of a mobile node arc divided into active on, active off, idle. The active on state means when any incoming or outgoing data session arrives to a mobile node. After data session is completed, the state of the motile node is changed into active off from active on. At this moment, the active timer starts to be operated. If the active timer expires, the mobile node moves to idle state. If a mobile node has very frequently data sessions at the same cell, the mobile node is better to move slowly into idle state. The other way, if the mobile node very frequently moves into new cell area and receives or sends little data, the mobile node is better to move earlier into idle state. In this raper, the active timer is adaptively set by the mobile nodes traffic and mobility characteristics and the paging scheme using this active timer is proposed to reduce the location registration cost.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.2
• /
• pp.7-16
• /
• 2000

In this paper, IEEE 802.11 MAC layer protocol is modeled by p-persistent CSMA method. And We introduce performance analysis model based on Basic CSMA/CA protocol, CTS/RTS protocol and hidden node effect reflected Basic CSMA/CA Protocol, Which is mathematically assayed by renewal theory. In this throughput, the result shown that Basic CSMA/CA protocol is profitable when the number of active node is smaller, or the length of packet is shorter, and CTS/RTS protocol is lucrative when the number of active node is larger, or the length of packet is longer. Also the result shown that hidden node less affected when the active node has small one, rather than when the active node has larger one.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.188-198
• /
• 2002

In this paper, we propose an active network to support reliable data transmission in the mobile ad-hoc network. The active network uses DSR(Dynamic Source Routing) protocol as its basic routing protocol, and uses source and destination nodes as key active nodes. For reliable improvement the source node is changed to source active node to add function that its buffer to store the last data with the flow control for data transmission per destination node. The destination node is changed to destination active node to add function that it requests the re-transmission for data that was not previously received by the destination active node with the flow control for data reception per source active node As the result of evaluation. we found the proposed active network guaranteed reliable data transmission with almost 100% data reception rate for slowly moving mobile ad-hoc network and with more 95% data reception rate, which is improvement of 3.5737% reception rate compared with none active network, for continuously fast moving mobile ad-hoc network.

• Journal of KIISE:Information Networking
• /
• v.29 no.6
• /
• pp.712-721
• /
• 2002

The active network is a new networking approach to allow new protocols to be developed easily by solving the limitation of the existing protocol development procedure and the long protocol standardization process. So far many research institutes and universities have proposed active node architectures and active packet formats, but still there are some problems needed to be solved. One of them is the active packet format and the routing approach which consider the requirements of various active applications. Therefore, in this paper, we figure cut the requirements of various active applications and design four types of active packet formats that reflect these requirements and propose routing schemes appropriate for these characteristics. Also we propose an active node architecture which reflect these requirements.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3176-3182
• /
• 2009

The PBNM on MANET is being researched to ensure the reliability and efficiency between mobile nodes. Therefore, it is essential to determine the cluster effectively which will perceive the movements of nodes and distribute the policies. In PBNM mechanism, to determine the node cluster for PDP and manage PEP nodes, Active PDP Discovery Protocol is proposed as a mechanism which is more efficient than preexistent techniques. While k-hop cluster selects the PEP nodes which PDP node manages, Active PDP Discovery actively selects the PDP node among the moving PEP node. This method prevents orphan nodes that are not connected to PDP and reduces continual broadcasting messages. This paper implements Active PDP Discovery which determines cluster in the real networks and analyzes its capability, expanding COPS-PR to detect the movement of nodes and adding MNL to PDP node.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.3
• /
• pp.217-223
• /
• 2007

This paper introduces an active sensing node using radio-frequency (RF) telemetry. This device has brought the traditional impedance-based structural health monitoring (SHM) technique to a new paradigm. The RF active sensing node consists of a miniaturized impedance measuring device (AD5933), a microcontroller (ATmega128L), and a radio frequency (RF) transmitter (XBee). A macro-fiber composite (MFC) patch interrogates a host structure by using a self-sensing technique of the miniaturized impedance measuring device. All the process including structural interrogation, data acquisition, signal processing, and damage diagnostic is being performed at the sensor location by the microcontroller. The RF transmitter is used to communicate the current status of the host structure. The feasibility of the proposed SHM strategy is verified through an experimental study inspecting loose bolts in a bolt-jointed aluminum structure.

• Journal of Korea Multimedia Society
• /
• v.6 no.7
• /
• pp.1245-1255
• /
• 2003

Request for network becomes complicated gradually and network traffic is increasing, To overcome this situation, the structure of network node should be changed to accept new service quickly and economically by executing program code in node itself. Active Network's research can use net resources more properly because of executing program within node itself. In this paper, we design a programming language, namely ASL, for Active Sensor to describe function and behavior of active sensor. We also design and implement the interpreter for proposed ASL.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2178-2181
• /
• 2003

Active networks allow active node’s functionality to be extended dynamically through the use of active extensions. This flexible architecture facilitates the deployment of new network protocols and services. However, the active nature of a network also raises serious safety and security concerns. These concerns must be addressed before active networks can be deployed. In this paper we look at how we can control active extension’s access to different active nodes. Specifically, the authentication between active nodes is very important in this case. We use unique identity each node has for transferring access policies between active nodes. In this paper, we suggest a new method of transferring access policies performing authentications using identities between active nodes.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.109-112
• /
• 2005

In this paper, we propose an improved delay-constrained unicast routing (I-DCUR) algorithm for real-time networks which is based on the delay-constrained unicast routing (DCUR) algorithm. Our I-DCUR algorithm is quite different from DCUR algorithm, because the node will choose the link between the active node and the previous node, and it will replace the original loop path when it detects a loop. Thus, firstly consider to choose the link between the active node and the previous node to replace the original loop path when a node detects a loop. So our algorithm can make the construction of path more efficiently, as compared to DCUR algorithm. We could see that the performance of I-DCUR algorithm is much better than DCUR algorithm in the experimental results. There were over 40% improvement in 100 nodes, 60% in 200 nodes, and 9% reduction of costs.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.361-370
• /
• 2004

All active nudes which have no physically direct connection with each other in If network must be able to compose and manage network topology Informations. Besides one active program can be performed by the active nodes when every active packet for this program is transmitted without any loss of packets. Also the active packets should be transmitted effectively to minimize the transmission delay and securely from threatens. In this thesis, the discovery scheme of active nodes is adapted for active nodes in IP networks to compose and manage the topology information. The scheme for the efficient, reliable and secure transmission of active packets is also proposed. The sequence number is assigned to every active packet. If a receiver detects the loss of active packet checking the sequence number, the receiver requests the retransmission of the lost packet to the previous active node. kiter receiving an active packet and adapting security and reliability schemes, intermediate active nodes not only copy and send the Packet Instantly but also apply some suity mechanisms to it. And the active packet transmission engine is proposed to provide these transmission schemes The simulation of the adapted active node discovery scheme and the proposed active packet transmission engine is performed. The simulation results show that the adapted active node discovery scheme is efficient and the proposed active engine has the low latency and the high performance.