• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.5
• /
• pp.287-297
• /
• 2022

This paper presents experimental and analytical studies on the lateral cyclic behavior of RC columns actively confined with iron-based shape memory alloy (Fe-SMA) strips. Based on the Anexperimental study, we investigated the effectiveness of active confinement through compression testings of concrete cylinders confined by Fe SMA strips and carbon fiber-reinforced polymer (CFRP) sheets. The test results showed that the specimens confined with Fe SMA strips significantly increased the deformation capacity of the concrete, even under lower confining pressures, compared to those specimensconfined with CFRP sheets. The experimental results were used to develop finite-element models of RC columns confined with Fe SMA or CFRP in their plastic-hinge region. After validating the proposed analytical model through comparison with the results from a previous RC column test, a series of lateral cyclic load analyses were carried out for the RC columns confined with Fe SMA and CFRP. The analytical results revealed that the lateral cyclic behavior of the Fe SMA-confined column was greatly enhanced in terms of deformation and energy dissipation capacities compared with tothat of the as-built and CFRP-confined columns.

• Smart Structures and Systems
• /
• v.24 no.3
• /
• pp.361-377
• /
• 2019

The stiffness of shape memory alloy (SMA) spring while in actuation is represented by an empirical model that is derived from the logistic differential equation. This model correlates the stiffness to the alloy temperature and the functionality of SMA spring as active variable stiffness actuator (VSA) is analyzed based on factors that are the input conditions (activation current, duty cycle and excitation frequency) and operating conditions (pre-stress and mechanical connection). The model parameters are estimated by adopting the nonlinear least square method, henceforth, the model is validated experimentally. The average correlation factor of 0.95 between the model response and experimental results validates the proposed model. In furtherance, the justification is augmented from the comparison with existing stiffness models (logistic curve model and polynomial model). The important distinction from several observations regarding the comparison of the model prediction with the experimental states that it is more superior, flexible and adaptable than the existing. The nature of stiffness variation in the SMA spring is assessed also from the Dynamic Mechanical Thermal Analysis (DMTA), which as well proves the proposal. This model advances the ability to use SMA integrated mechanism for enhanced variable stiffness actuation. The investigation proves that the stiffness of SMA spring may be altered under controlled conditions.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.6
• /
• pp.146-152
• /
• 2007

An active micro-mixer, which was composed of an oscillating micro-stirrer in the microchannel to provide rapid, effective mixing at high flow, rates was analyzed. The effects of molecular diffusion and disturbance by the stirrer were considered with regard to two types of mixer models: the simple straight microchannel and microchannel with an oscillating stirrer. Two types of mixer models were studied by analyzing mixing behaviors such as their interaction after the stirrer. The mixing was calculated by Lattice Boltzmann methods using the D2Q9 model. In this study, the time-averaged mixing index formula was used to estimate the mixing performance of time-dependent flow. The mixing indices of the two models compared. From the results, it was found that the mixer with an oscillating stirrer was much more enhanced and stabilized. Therefore, an optimum design for a dynamic micro-mixer with an oscillating stirrer was performed using Taguchi method in order to obtain a robust solution. The design parameters were established as the frequency, the length and the angle of the stirrer and the optimal values were determined to be 2, 0.8D and ${\pm}75^{\circ}$, respectively. It was found that the mixing index of the optimal design increased 80.72% compared with that of the original design.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.45-55
• /
• 2013

In this study, we propose a tongue diagnosis system which detects the tongue from face image and divides the tongue area into six areas, and finally generates tongue fur ratio of each area. To detect the tongue area from face image, we use ASM as one of the active shape models. Detected tongue area is divided into six areas and the distribution of tongue coating of six areas is examined by SVM. For SVM, we use a 3-dimensional vector calculated by PCA from a 12-dimensional vector consisting of RGB, HSV, Lab, and Luv. As a result, we stably detected the tongue area using ASM. Furthermore, we recognized that PCA and SVM helped to raise the ratio of tongue coating detection.

• Journal of the Korea Society for Simulation
• /
• v.23 no.3
• /
• pp.27-32
• /
• 2014

In this paper, We are going to propose the novel structure with improved behavior than the conventional vertical structure for VLSI CMOS circuits. For this, the proposed structure is the moat shape for STI. We want to analysis the characteristics of simulations about the electron concentration distribution, oxide layer shape of hot electron stress, potential flux and electric field flux, electric field fo themal damage and current-voltage characteristics in devices. Physically based models are the ambient and stress bias conditions of TCAD tool. As a analysis results, shallow trench structure were trended to be electric functions of passive as device dimensions shrink. The electrical characteristics influence of proposed STI structures on the transistor applications become stronger the potential difference electric field and saturation threshold voltage, are decreased the stress effects of active region. The fabricated device of based on analysis results data were the almost same characteristics of simulation results data.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.9
• /
• pp.177-187
• /
• 2021

The purpose of the research to evaluate the efficiency and productivity growth rate of some Vietnamese commercial banks in the period 2008-2020. Using input and output selection theory, the author selected 2 models, estimating the efficiency for model 1 and estimating the yield change for both the models. We have built a model to estimate the efficiency and calculate as well as decompose the productivity growth of Vietnamese commercial banks during the period of active mergers and acquisitions activities in the banking system. Based on the results of the efficiency estimation, TFP shows during mergers and acquisitions, efficiency fluctuates but in an inverted U-shape (increasing from 2008-2011 but decreasing from 2013 to 2020). The estimated results of the impact assessment model show that FDI reduces the efficiency of banks. Productivity analysis shows that 6 out of 23 banks in the study period had positive TFP growth (tfpch > 1) due to technical progress and management efficiency. The findings of this study suggest that Vietnam's commercial banking system has many opportunities to improve operational efficiency in many aspects. In which, there are opportunities to increase credit, improve governance as well as improve the technology level of each bank. In addition, along with traditional products such as deposits and loans, diversification with a wide range of products and services is an important factor to enhance customer experience and demand in commercial banks.

• Journal of Digital Convergence
• /
• v.12 no.7
• /
• pp.239-245
• /
• 2014

In this paper, a weighted value wrinkle detection method is suggested based on the analysis on the entire facial features such as face contour, face size, eyes and ears. Firstly, the main facial elements are detected with AAM method entirely from the input screen images. Such elements are mainly composed of shape-based and appearance methods. These are used for learning the facial model and for matching the face from new screen images based on the learned models. Secondly, the face and background are separated in the screen image. Four points with the biggest possibilities for wrinkling are selected from the face and high wrinkle weighted values are assigned to them. Finally, the wrinkles are detected by applying Canny edge algorithm for the interested points of weighted value. The suggested algorithm adopts various screen images for experiment. The experiments display the excellent results of face and wrinkle detection in the most of the screen images.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.5
• /
• pp.660-667
• /
• 2006

This paper presents a novel region-based snake method for vessel segmentation. According to geometric shape analysis of the vessel structure with different scale, an efficient statistical estimation of vessel branches is introduced into the energy objective function, which applies not only the vessel intensity information, but also geometric information of line-like structure in the image. The defined energy function is minimized using the gradient descent method and a new region-based speed function is obtained, which is more accurate to the vessel structure and not sensitive to the initial condition. The narrow band algorithm in the level set framework implements the proposed method, the solution of which is steady. The segmentation experiments are shown on several images. Compared with other geometric active contour models, the proposed method is more efficient and robust.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.6
• /
• pp.143-149
• /
• 2008

This paper presents the results of the study on the novel micro mixer. Existing micro mixer is classified as active mixing and passive mixing by the mixing principles. Both mixing principles have problems. For solving these problems, this research has developed the novel micro mixers based on a totally different principle compared with former mixers. They not only have a simpler structure than former ones but also are able to achieve high mixing efficiency in spite of low power consumption due to using Lorentz Force. In addition, they are designed to increase the efficiency of mixing by changing the rotating direction of fluid with a polar switching circuit. Driving forces of the mixer are Lorentz force and a moving force of fluid due to electrophoresis. Because the efficiency of mixer is affected by electrode shape, several models have been made. The computer simulation has been made to estimate the efficiency of each mixer.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.9
• /
• pp.69-78
• /
• 2015

If an active displacement occurs on a wall with finite size, the ground behind the wall forms shapes of 3-dimensional wedges and 3-dimensional active earth pressure are applied on the wall. In the previous studies, shapes of 3-dimensional wedges were measured and the resultant of 3-dimensional active earth pressure has been calculated. In this study, the magnitude and the distribution of 3-dimensional active earth pressure depending on the size of a rectangular wall, which was defined by the aspect ratio (h/w), that is, the ratio between the height and the width of wall, were measured and compared with previous 3-dimensional models. The result shows that, the horizontal displacement (S) of the wall is approx 0.12% of the height of wall (h). The resultant 3-dimensional active earth pressure is similar to that of Karstedt (1982). The distributions of earth pressures on the wall are parabolic shape. The peak earth pressure was measured at the 0.5~0.55 depth from the ground surface. The reduction factor of 3-dimensional active earth pressure against the 2-dimensional earth pressure (${\alpha}$) depending the aspect ratio (h/w) is presented by the diagram.