• 센서학회지
• /
• 제20권1호
• /
• pp.14-18
• /
• 2011

An analytical pinning-voltage model of a pinned photodiode has been proposed and derived. The pinning-voltage is calculated using doping profiles based on shallow- and exponential-junction approximations. Therefore, the derived pinning-voltage model is analytically expressed in terms of the process parameters of the implantation. Good agreement between the proposed model and simulated results has been obtained. Consequently, the proposed model can be used to predict the pinning-voltage and related performance of a pinned photodiode in a CMOS active pixel sensor.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권6호
• /
• pp.337-341
• /
• 2004

In this paper the effect of chaos induced instability in Brillouin-active fiber-ring sensor is described. The inherent optical feedback by the backscattered Stokes wave in optical fiber leads to instabilities in the form of optical chaos. The paradigm of optical chaos in fiber serves as a test for fundamental study of chaos and its suppression and exploitation in practical application in communication and sensing. At weak power, the nature of the Brillouin instability can occur at before threshold. At strong power, the temporal evolution above threshold is periodic and at higher intensity can become chaotic. The threshold for the Brillouin instability in fiber-ring sensor is much lower than the threshold of the normal Brillouin instability process.

• 한국소음진동공학회논문집
• /
• 제11권6호
• /
• pp.193-199
• /
• 2001

Active control of forced vibration of the cantilevered laminated composite plates using collocated piezoceramic sensor/actuator is analyzed numerically and verified experimentally for various fiber orientations. Impact on the stiffness and the damping properties is studied by varying stacking sequence of [$\theta$$_{4}$O$_{2}$90$_{2}$]s for the laminated composite plate. For the forced vibration control, the plate is excited by one pair of collocated PZT exciters in resonance and its vibrational response is suppressed by the other collocated PZT sensor/actuator using direct negative velocity feedback. It is shown that the active control of forced vibration is more effective for the smart laminated plate with higher modal damped stiffness(2ζ$\omega$/aup 2/) .

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.165-166
• /
• 2012

• 한국컴퓨터정보학회논문지
• /
• 제25권12호
• /
• pp.195-202
• /
• 2020

객체 감지 및 환경 센서 기반의 센서네트워크 환경에서 자원 활용 효율화를 위한 제어 시스템은 센서데이터 획득 및 송수신 기능과 서버에서의 분석을 기반으로 하는 능동적 제어 기능을 필요로 한다. 본 논문은 능동규칙 기반 이동에이전트 미들웨어를 이용하여 원격 데이터 센싱과 서버와의 Zigbee 기반 통신 및 서버의 데이터 분석 방법을 구현함으로써, 센서네트워크 환경에서 중앙 센서데이터 서버의 부하를 감소시키는 새로운 분산제어 프레임워크를 제안한다. 또한, 수요자의 요구 및 환경 변수들을 적용한 능동규칙 기반의 분산제어 방법을 이용한 절전 시스템 프로토타입을 구현하고, 이동에이전트 미들웨어 환경에서 실험과 평가를 통하여 유효성을 검증하였다. 제안 시스템은 센서네트워크 환경에서 분산된 객체들을 효율적으로 자율제어할 수 있는 시스템 프레임워크이며, 향후 스마트 전력 시스템을 위한 최적 전력제어 기반의 수요 반응 서비스 개발에 효과적 적용이 가능하다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.48.4-48
• /
• 2002

1) A method to realize active vibration control using SAC and acceleration type sensor is proposed from the viewpoint of practical application. 2) The use of acceleration type sensor makes it easy to satisfy ASPR condition in applying SAC system and to implement sensor in practical mechanical system. 3) Results were confirmed through numerical simulation of 1 DOF vibration system.

• Journal of the Optical Society of Korea
• /
• 제2권1호
• /
• pp.34-37
• /
• 1998

We present a novel method for the stabilization of the Sagnac current sensor with active twist control. The sensor output was improved more than 8 times by employing the proposed stabilization method. Stability within $\pm$1.7% was demonstrated between 36$^{\circ}C$ and 62$^{\circ}C$.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.90.6-90
• /
• 2002

An active stick which has the variable force-feel characteristics is developed. A combined position and force control strategy is mechanized using a 2-axis built-in force sensor and LVDT. The 2-axis force sensor which measures the stick force felt by the operator is developed by using strain gages and appropriate instrumental amplifiers. A mathematical model of the active stick dynamics is derived, and compared with the experimental results. The frictional torque of the stick due to the mechanical contacts of several parts makes the experimental frequency responses to be dependent on the magnitude of excitation signal, and the precision closed loop control to be difficult. A friction observe...

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.247-252
• /
• 2008

This paper presents an active vibration control of cantilever beams under disturbances by a primary force. A direct velocity feedback control using a pair of PZT actuator and a velocity sensor is considered. Variation of the stability and performance with the locations of the sensor/actuator pair is investigated. It is found that the maximum gain varies with the locations of the sensor/actuator pair significantly. The maximum gain shows a symmetric distribution along the beam length with respect to the center point, although the boundary condition of the beam is unsymmetric. The control performance is affected by the location of the primary force as well as the location of the sensor/actuator pair. The active control system can more effectively reduce the vibration when the primary force is located close to the fixed boundary.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.253-264
• /
• 1999

Most autonomous mobile robots view only things in front of them, and as a result, they may collide with objects moving from the side or behind. To overcome this problem. an Active Omni-directional Range Sensor System has been built that can obtain an omni-directional range data through the use of a laser conic plane and a conic mirror. Also, mobile robot has to know its current location and heading angle by itself as accurately as possible to successfully navigate in real environments. To achieve this capability, we propose a self-localization algorithm of a mobile robot using an active omni-directional range sensor in an unknown environment. The proposed algorithm estimates the current position and head angle of a mobile robot by a registration of the range data obtained at two positions, current and previous. To show the effectiveness of the proposed algorithm, a series of simulations was conducted and the results show that the proposed algorithm is very efficient, and can be utilized for self-localization of a mobile robot in an unknown environment.