• 제목/요약/키워드: Active RF

검색결과 373건 처리시간 0.02초

PN 유도 기반 능동 RF 탐색기 조우 시나리오에서 반복형 능동 유인체 대응에 따른 공중 플랫폼 생존성 분석 (Survivability for Airborne Platform on Encounter Scenarios where Repeater-type Active Decoy Counteracts Active RF Seeker System Operating Based on PN Guidance Law)

  • 임재원;정기환;이현수;고일석
    • 한국전자파학회논문지
    • /
    • 제29권4호
    • /
    • pp.256-265
    • /
    • 2018
  • 본 논문에서는 PN 유도 법칙을 기반으로 동작하는 능동 RF 탐색기에 대한 반복형 능동 유인체의 재밍 환경에서 공중 플랫폼의 생존성을 분석한다. 플랫폼의 기동, 유인체의 RF 제원(spec), 탐색기의 접근 거리 및 방향 등 다른 조건의 여러 조우 시나리오에서 플랫폼에 대한 탐색기의 miss distance를 계산한다. Miss distance와 근접신관거리와의 비교를 통해 플랫폼의 생존 여부를 판별하며, 이를 기반으로 몇몇 조우 시나리오에서 플랫폼 생존 영역을 도출한다.

실시간 위치추적을 위한 2.45GHz 능동형 고주파 시스템에 관한 연구 (A Study of 2.45GHz Active RF System for Real Time Location)

  • 김진영;정용섭;강준희
    • 대한공간정보학회지
    • /
    • 제16권3호
    • /
    • pp.43-49
    • /
    • 2008
  • 실시간 위치추적 (Real Time Location System ; RTLS) 시스템은 유비쿼터스 사회에서 인물, 자산, 물류제품을 실시간으로 추적하기 위해 매우 중요하다. 본 연구에서는 RTLS를 위해 능동형 RF 시스템을 개발하였고 개발된 시스템의 성능을 측정하였다. 본 시스템에서 개발한 RTLS 시스템은 3개의 능동형 리더(수신기)와 1개의 태그로 구성되었다. 개발된 능동형 소형 태그에는 동전형 배터리를 내장하였다. 태그의 소형화를 위해 내장형 PCB 안테나와 칩 안테나를 장착하여 태그의 성능을 측정하였다. 또한, RF 시스템의 제조 원가를 줄이기 위해 저가의 RF 트랜시버 CC2510 칩셋을 사용하였다. CC2510 칩셋은 능동형 태그와 능동형 리더 (수신기)사이의 거리를 측정하기 위한 수신신호 강도지시기가 (Received Signal Strength Indicator ; RSSI) 내장되어있다.

  • PDF

저잡음 특성을 갖는 새로운 RF 능동 대역통과 여파기 (A Novel RF Active Bandpass Filter with Low Noise Performance)

  • 이재룡;윤상원
    • 한국전자파학회논문지
    • /
    • 제13권8호
    • /
    • pp.748-753
    • /
    • 2002
  • 본 논문은 저잡음 특성을 갖는 구조의 부성저항을 이용하여 공진부의 손실을 보상하는 새로운 구조의 공진회로를 제안하고 있다. 또한 여파기 설계시, noise해석을 통하여 최적의 noise 특성을 갖도록 능동 대역통과 여파기의 설계방법을 제시하고 있다. FET에 의해 만들어진 능동 커패시터는 부성저항과 커패시턴스 성분을 가지고 있으며, 부성저항에 의해 공진회로를 구성하는 인덕터 소자의 손실을 보상해 준다. 기존의 능동 여파기는 대개 높은 잡음지수를 가지는데 반하여 제안된 능동 여파기는 능동소자의 잡음특성을 최소화하는 구조로 설계되었다. 잡음지수를 최소화함으로서 RFIC나 MMIC와 같은 집적회로로서 수신단 Front-end설계에 응용할 수 있다. 제작된 2단 능동대역통과 여파기는 1.9 GHz 대역에서 설계되었으며, 측정된 삽입손실은 0 dB, 잡음지수는 2.6 dB, 그리고 OIP3는 8 dBm의 특성을 얻었다

밀리미터파 응용을 위한 완전집적 다운컨버터 MMIC (A fully integrated downconverter MMIC for millimeter wave applications)

  • 정장현;윤영
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권1호
    • /
    • pp.99-104
    • /
    • 2013
  • 본 논문에서는 밀리미터파에의 응용을 위하여, 소형화된 다운컨버터 MMIC(monolithic microwave integrated circuit)를 제안하였다. 구체적으로는, RF(radio frequency) 및 LO(local oscilator) 신호의 격리특성을 위해 Lange 커플러가 삽입되었고, ${\lambda}$/4 전송선로를 연결하여 역위상 RF와 동위상 LO 신호가 믹서부분 FET(field effect transistor)의 게이트에 인가되었다. 또한, IF(intermediate frequency) 출력 신호의 역위상의 결합과 LO 누설신호 제거를 위하여 역위상 결합용 능동 벌룬이 출력 포트에 설치되었다. 측정 결과에 따르면, 제안된 다운컨버터 MMIC는 양호한 RF 특성을 보였다. 구체적으로, 63 GHz의 RF 주파수와 60.6 GHz의 LO 주파수에서 IF 출력 포트에서의 LO 누설 전력이 .25 dBc, RF와 LO의 격리특성은 18 dB를 보였으며, 변환 이득이 10.3 dB를 보였다. 따라서, SAW 필터와 같은 LO 제거용 off-chip 소자는 제안된 다운컨버터 MMIC에서는 필요하지 않게 되었다. 모든 능동소자와 수동소자가 GaAs MMIC 내부에 집적되었으며, 전체 사이즈는 $2.2{\times}1.4mm^2$ 로써 초소형 MMIC가 구현되었다.

Remote Impedance-based Loose Bolt Inspection Using a Radio-Frequency Active Sensing Node

  • Park, Seung-Hee;Yun, Chung-Bang;Inman, Daniel J.
    • 비파괴검사학회지
    • /
    • 제27권3호
    • /
    • pp.217-223
    • /
    • 2007
  • This paper introduces an active sensing node using radio-frequency (RF) telemetry. This device has brought the traditional impedance-based structural health monitoring (SHM) technique to a new paradigm. The RF active sensing node consists of a miniaturized impedance measuring device (AD5933), a microcontroller (ATmega128L), and a radio frequency (RF) transmitter (XBee). A macro-fiber composite (MFC) patch interrogates a host structure by using a self-sensing technique of the miniaturized impedance measuring device. All the process including structural interrogation, data acquisition, signal processing, and damage diagnostic is being performed at the sensor location by the microcontroller. The RF transmitter is used to communicate the current status of the host structure. The feasibility of the proposed SHM strategy is verified through an experimental study inspecting loose bolts in a bolt-jointed aluminum structure.

Ginsenoside Rf inhibits cyclooxygenase-2 induction via peroxisome proliferator-activated receptor gamma in A549 cells

  • Song, Heewon;Park, Joonwoo;Choi, KeunOh;Lee, Jeonggeun;Chen, Jie;Park, Hyun-Ju;Yu, Byeung-Il;Iida, Mitsuru;Rhyu, Mee-Ra;Lee, YoungJoo
    • Journal of Ginseng Research
    • /
    • 제43권2호
    • /
    • pp.319-325
    • /
    • 2019
  • Background: Ginsenoside Rf is a ginseng saponin found only in Panax ginseng that affects lipid metabolism. It also has neuroprotective and antiinflammatory properties. We previously showed that Korean Red Ginseng (KRG) inhibited the expression of cyclooxygenase-2 (COX-2) by hypoxia via peroxisome proliferator-activated receptor gamma ($PPAR{\gamma}$). The aim of the current study was to evaluate the possibility of ginsenoside Rf as an active ingredient of KRG in the inhibition of hypoxia-induced COX-2 via $PPAR{\gamma}$. Methods: The effects of ginsenoside Rf on the upregulation of COX-2 by hypoxia and its antimigration effects were evaluated in A549 cells. Docking of ginsenoside Rf was performed with the $PPAR{\gamma}$ structure using Surflex-Dock in Sybyl-X 2.1.1. Results: $PPAR{\gamma}$ protein levels and peroxisome proliferator response element promoter activities were promoted by ginsenoside Rf. Inhibition of COX-2 expression by ginsenoside Rf was blocked by the $PPAR{\gamma}-specific$ inhibitor, T0070907. The $PPAR{\gamma}$ inhibitor also blocked the ability of ginsenoside Rf to suppress cell migration under hypoxia. The docking simulation results indicate that ginsenoside Rf binds to the active site of $PPAR{\gamma}$. Conclusions: Our results demonstrate that ginsenoside Rf inhibits hypoxia induced-COX-2 expression and cellular migration, which are dependent on $PPAR{\gamma}$ activation. These results suggest that ginsenoside Rf has an antiinflammatory effect under hypoxic conditions. Moreover, docking analysis of ginsenoside Rf into the active site of $PPAR{\gamma}$ suggests that the compound binds to $PPAR{\gamma}$ in a position similar to that of known agonists.

An Injection-Locked Based Voltage Boost-up Rectifier for Wireless RF Power Harvesting Applications

  • Lee, Ji-Hoon;Jung, Won-Jae;Park, Jun-Seok
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권6호
    • /
    • pp.2441-2446
    • /
    • 2018
  • This paper presents a radio frequency-to-direct current (RF-to-DC) converter for special RF power harvesting application at 915 MHz. The major featured components of the proposed RF-to-DC converter is the combination of a cross-coupled rectifier and an active diode: first, the cross-coupled rectifier boosts the input voltage to desired level, and an active diode blocks the reverse current, respectively. A prototype was implemented using $0.18{\mu}m$ CMOS technology, and the performance was proven from the fact that the targeted RF harvesting system's full-operation with higher power efficiency; even if the system's input power gets lower (e.g., from nominal 0 to min. -12 dBm), the proposed RF-to-DC converter constantly provides 1.47 V, which is exactly the voltage level to drive follow up system components like DC-to-DC converter and so on. And, maximum power conversion efficiency is 82 % calculated from the 0 dBm input power, 2.3 mA load current.

Measurement and Explanation of DC/RF Power Loci of an Active Patch Antenna

  • Mcewan, Neil J.;Ali, Nazar T.;Mezher, Kahtan A.;El-Khazmi, Elmahdi A.;Abd-Alhameed, Raed A.
    • ETRI Journal
    • /
    • 제33권1호
    • /
    • pp.6-12
    • /
    • 2011
  • A case study of an active transmitting patch antenna revealed a characteristic loop locus of DC power versus RF output power as drive frequency was varied, with an operational bandwidth substantially smaller than the impedance bandwidth of the radiator. An approximate simulation technique, based on separation of the output capacitance of the power transistor, yielded easily visualized plots of power dependence on internal load impedance, and a simple interpretation of the experimental results in terms of a near-resonance condition between the output capacitance and output packaging inductance.

0.18㎛ CMOS 공정을 이용한 WBAN용 비동기식 IR-UWB RF 송수신기 (A Non-coherent IR-UWB RF Transceiver for WBAN Applications in 0.18㎛ CMOS)

  • 박명철;장원일;하종옥;어윤성
    • 전자공학회논문지
    • /
    • 제53권2호
    • /
    • pp.36-44
    • /
    • 2016
  • 본 논문에서는 $0.18{\mu}m$ CMOS 공정을 이용하여 WBAN(Wireless Body Area Network)용 IR-UWB(Impulse Radio Ultra Wide Band) RF 송수신기를 제안한다. 설계된 송수신기는 3-5GHz UWB low band를 지원하며 OOK(On-Off Keying) 변조 방식을 사용한다. 수신기는 복잡도와 소모 전력을 줄이기 위해서 비동기식 에너지 검출 방식을 사용하였다. 원하지 않는 잡음을 제거하고 감도를 개선하기 위하여 RF active notch filter가 내장되어 있다. VCO 기반의 수신기는 switch mechanism을 사용하였다. 사용된 switch mechanism은 소모 전력을 줄이고 VCO leakage를 최소화 할 수 있다. 또한, 중심주파수가 변해도 항상 동일한 spectrum mask를 가진다. 측정된 수신기의 감도는 3.5 GHz의 중심주파수에서 1.579 Mbps의 전송 속도를 가질 때 -84.1 dBm을 가진다. 송신기와 수신기는 각각 0.3 nJ/bit, 41 mW의 소모 전력을 사용한다.

충돌방지 매체접속 제어방식이 가능한 Active RFID 시스템 설계 (Design of an active RFID system for collision avoidance at MAC)

  • 정성재;안준식;김일환
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.181-183
    • /
    • 2007
  • 본 논문은 RF 리더기와 RF 태그 상호간의 통신시에 발생할 수 있는 충돌을 감지하고 이를 능동적으로 회피할수 있는 RFID(Radio Frequency IDentification)의 설계에 관한 내용이다. RFID는 사람, 자동차, 화물, 상품 등에 정보를 부가하는 시스템으로 그 부가정보를 무선통신매체를 이용하여 비접족으로 해독하는 시스템으로 기존의 바코드보다 데이터의 전송속도와 용량의 증가 그리고 편리성이 향상되는 장점이 있으나, 동시에 여러개의 RF태그와의 무선통신으로 인한 데이터의 충돌이 발생할 수 있다. 이러한 충돌을 감지하고 이를 적절하게 회피하는 것은 RFID 시스템의 신뢰성을 높이는데 필수적인 요소이다. RFID 태그로 사용되기 위해서는 건전지로 구동될 수 있도록 저전력소모가 요구되며 또한 통신의 시작과 충돌을 파악할 수 있는 캐리어 감지기능이 필수적이다. 본 논문에서는 이러한 조건들을 만족하는 Chipcon 사(社)의 양방향 RF IC를 사용하였다. Chipcon 사(社)의 양방향 RF IC는 다중 주파수 대역의 선택과 변조방식을 시리얼통신을 통해서 손쉽게 변경할 수 있기 때문에 충돌감지시 다양한 회피알고리즘을 상황에 맞게 구현할 수 있다. 본 논문에서는 양방향 RF IC를 사용하여 충돌을 감지하고 회피할 수 있는 RFID시스템을 설계하고 구현하였다.

  • PDF