• 공업화학
• /
• 제31권1호
• /
• pp.108-114
• /
• 2020

본 연구에서는, Ru[1]/TiO₂ 촉매 제조 시 소성/환원 조건에 따른 NH₃-SCO (selective catalytic oxidation) 효율을 비교하였다. Ru[1]/TiO₂ red는 Ru[1]/TiO₂ cal에 비하여 NH₃ 전환율 및 NH₃의 N₂ 전환율이 우수하였다. Ru[1]/TiO₂ 촉매의 물리·화학적 특성은 BET, XRD, TEM, XPS, H₂-TPR 분석에 의해 확인되었으며, 활성금속의 분산도와 표면 흡착 산소종(O_β)의 비율에 영향을 미치는 것으로 나타났다.

• 청정기술
• /
• 제6권1호
• /
• pp.17-25
• /
• 2000

상압유통식 고정층반응기를 이용하여 전이금속을 ALO-6에 담지한 촉매상에서 휘발성유기화합물인 벤젠, 톨루엔, 자일렌의 촉매산화에 관하여 조사하였다. 15% 전이금속/ALO-6 촉매상에서 톨루엔의 완전산화반응에 대한 활성의 크기는 Cu>Mn>Fe>V>Mo>Co>Ni>Zn의 순서였다. 15% Cu/ALO-6 촉매에서 소성온도의 증가는 비표면적을 감소시켰고 결과적으로 활성은 감소하였다. Cu/ALO-6촉매계에서 Cu의 담지량이 5%일 때 활성이 우수하였다. 5% Cu/ALO-6촉매상에서 벤젠, 톨루엔, 자일렌은 반응온도 $380^{\circ}C$, 접촉시간 4.5 g-cat.hr./g-mole 이상일 때 이산화탄소로 완전산화 되었다. 반응물에 따른 활성순서는 톨루엔>자일렌>벤젠 이었다. 반응물의 농도가 증가함에 따라 self-poison 에 기인하여 활성은 감소하였다.

• Journal of Microbiology and Biotechnology
• /
• 제25권5호
• /
• pp.662-671
• /
• 2015

To enrich the genetic resource of microbial xylanases with high activity and stability under alkaline conditions, a xylanase gene (xynSL4) was cloned from Planococcus sp. SL4, an alkaline xylanase-producing strain isolated from the sediment of soda lake Dabusu. Deduced XynSL4 consists of a putative signal peptide of 29 residues and a catalytic domain (30-380 residues) of glycosyl hydrolase family 10, and shares the highest identity of 77% with a hypothetical protein from Planomicrobium glaciei CHR43. Phylogenetic analysis indicated that deduced XynSL4 is closely related with thermophilic and alkaline xylanases from Geobacillus and Bacillus species. The gene xynSL4 was expressed heterologously in Escherichia coli and the recombinant enzyme showed some superior properties. Purified recombinant XynSL4 (rXynSL4) was highly active and stable over the neutral and alkaline pH range from 6 to 11, with maximum activity at pH 7 and more than 60% activity at pH 11. It had an apparent temperature optimum of 70℃ and retained stable at this temperature in the presence of substrate. rXynSL4 was highly halotolerant, retaining more than 55% activity with 0.25-3.0 M NaCl and was stable at the concentration of NaCl up to 4M. The enzyme activity was significantly enhanced by β-mercaptoethanol and Ca²⁺ but strongly inhibited by heavy-metal ions and SDS. This thermophilic and alkaline- and salt-tolerant enzyme has great potential for basic research and industrial applications.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.86.2-86.2
• /
• 2015

Cu2ZnSn(S,Se)4 thin film solar cells have been fabricated using sputtered Cu/Sn/Zn metallic precursors on Mo coated sodalime glass substrate without using a toxic H2Se and H2S atmosphere. Cu/Sn/Zn metallic precursors with various thicknesses were prepared using DC magnetron sputtering process at room temperature. As-deposited metallic precursors were sulfo-selenized inside a graphite box containing S and Se pellets using rapid thermal processing furnace at various sulfur to selenium (S/Se) compositional ratio. Thin film solar cells were fabricated after sulfo-selenization process using a 65 nm CdS buffer, a 40 nm intrinsic ZnO, a 400 nm Al doped ZnO, and Al/Ni top metal contact. Effects of sulfur to selenium (S/Se) compositional ratio on the microstructure, crystallinity, electrical properties, and cell efficiencies have been studied using X-ray diffraction, Raman spectroscopy, field emission scanning electron microscope, I-V measurement system, solar simulator, quantum efficiency measurement system, and time resolved photoluminescence spectrometer. Our fabricated Cu2ZnSn(S,Se)4 thin film solar cell shows the best conversion efficiency of 9.24 % (Voc : 454.6 mV, Jsc : 32.14 mA/cm2, FF : 63.29 %, and active area : 0.433 cm2), which is the highest efficiency among Cu2ZnSn(S,Se)4 thin film solar cells prepared using sputter deposited metallic precursors and without using a toxic H2Se gas. Details about other experimental results will be discussed during the presentation.

• 한국환경과학회지
• /
• 제15권2호
• /
• pp.101-106
• /
• 2006

The work of hairdressers includes washing, coloring, bleaching, permanent waving, conditioning, and cutting hair. Hairdressers are subjected to a number of physical and toxicological hazards. The toxicological hazards are those resulting from exposure to a wide range of chemicals that are usually classified active processes. In this study, twenty beauty shops were selected to assess the exposure to indoor air pollutants such as VOCs and particulate matter $(PM_{10})$ during one month from September 1 to September 30, 2003. Indoor air quality of beauty shops might be worse by vehicle emissions because the beauty shops were generally located near roadways. Personal exposures to VOCs and $PM_{10}$ were related to indoor concentrations of beauty shops. According to the questionnaire, hairdressers complained of sore throat, eye irritation, and nervousness as physical symptoms. The measured mean concentrations of respiratory particulates were $30.5ng/m^3$ in indoor, $30.5ng/m^3$ in outdoor and $44.0ng/m^3$ on personal levels. The personal concentration was found higher than indoor and outdoor concentrations. The heavy metals mean concentrations were shown as indoor (Na>Zn>Cr), outdoor (Cr>Zn>Pb), and personal (Na>Cr>Zn) levels. Conclusively, customers as well as workers in the beauty shops might be highly exposed to air pollutants from indoor and outdoor sources. Therefore, proper management should be taken to improve the indoor air quality in beauty shops.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권5호
• /
• pp.495-501
• /
• 2005

Al is a active metal that owes its resistance to a thin, protective, barrier oxide surface layer, which is stable in air and neutral aqueous solution. Thus Al alloys are widely used in architectural trim. cold & hot-water storage vessels and piping. However Al and most of its alloy may corrode with some forms such as pitting corrosion, intergranular corrosion and galvanic corrosion in the case of exposure to various industrial and marine atmosphere. Therefore a correct evaluation of corrosion resistance for their Al and Al alloys may be more important in a economical point of view. In this study. a relative evaluation of corrosion resistance for three kinds of Al alloys such as ALDC2, ALDC3, and ALDC8 series was carried out with electrochemical method. There is a tendency that corrosion potential is shifted to positive or negative direction by alloying components regardless of corrosion resistance. Moreover the data of corrosion properties obtained from cathodic Polarization curve, cyclic voltammogram and AC. DC impedance respectively showed a good correspondence each other against the corrosion resistance but variation of corrosion potential. passivity current density of anodic polarization curve and corrosion current density by Tafel extrapolation and Stern-Geary method didn't correspond with not only each other but also considerably the data of corrosion properties discussed above. Therefore it is suggested that an optimum electrochemical evaluation for corrosion resistance of Al alloy is to calculate the diffusion limiting current density of cathodic polarization curve, impedance of AC or DC and polarization resistance of cyclic voltammogram.

• Applied Biological Chemistry
• /
• 제35권3호
• /
• pp.157-164
• /
• 1992

미생물을 이용하여 pyridine계 보효소인 NAD를 생산하기 위하여, 12종의 효모로부터 NAD 함량이 높은 Saccharomyces sake KBA No. 6을 선별하였으며, NAD 생산에 미치는 여러 가지 효과를 검토하였다. NAD 생산에 있어서 탄소원으로는 4% glucose, 질소원으로는 2% bactopeptone이 가장 좋았으며 최적 PM와 온도는 각각 5.0과 $30^{\circ}$C$이었다. 한편 NAD 전구물질로서 nicotinamide와 adenine을 동시에 사용한 경우 NAD 생산이 가장 좋았으며 이때의 농도는 각각 4 mg/ml과 3 mg/ml이었다. 또한 NAD 생산을 증가시키기 위하여 배양시 2가 금속이온들을 사용하였으며 이들 중 $Zn^{2+}$가 매우 효과적이었다. 계면활성제의 영향은 음이온 계면활성제인 sodium dodecyl sulfate(SDS)를 사용하였을 때 효과적이었다. 상기의 최적 조건하에서, 144시간 배양 후에 최대 NAD 생산량은 배지 100 ml당 35 mg이었으며 전체량의 89%인 31mg의 NAD가 배지 중에 유리되었다.

• Carbon letters
• /
• 제26권
• /
• pp.18-24
• /
• 2018

Pollution of chloride ion-reinforced concrete can trigger active corrosion processes that reduce the useful life of structures. Multifunctional materials used as a counter-electrode by electrochemical techniques have been used to rehabilitate contaminated concrete. Cement-based pastes added to carbonaceous material, fibers or dust, have been used as an anode in the non-destructive Electrochemical Chloride Extraction (ECE) technique. We studied the performance of the addition of Carbon Fiber (CF) in a cement-graphite powder base paste used as an anode in ECE of concretes contaminated with chlorides from the preparation of the mixture. The experimental parameters were: 2.3% of free chlorides, 21 days of ECE application, a Carbon Fiber Volume Fraction (CFVF) of 0.1, 0.3, 0.6, 0.9%, a lithium borate alkaline electrolyte, a current density of $4.0A/m^2$ and a cement/graphite ratio of 1.0 for the paste. The efficiency of the ECE in the traditional technique using metal mesh as an anode was 77.6% and for CFVF of 0.9% it was 90.4%, with a tendency to increase to higher percentages of the CFVF in the conductive cement-graphite paste, keeping the pH stable and achieving a homogeneous ECE in the mass of the concrete contaminated with chlorides.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.813-816
• /
• 2008

본 연구에서는 주물의 유통해석결과를 3차원 모델로 복원하여 가상현실 디스플레이 상에 가시화 하는 방법을 제안한다. 먼저 기존 CAE 해석 소프트웨어를 사용하여 유한차분법 기반 열유동 수치해석을 수행한다. 이 과정에서는 주물의 설계모델은 그 형태가 규칙적인 사각형 격자에 근사되며 용탕을 주형에 주입하는 것을 시작으로 충전이 완료될 때까지 사전에 정의된 단계수만큼 반복적으로 전체 복셀에 대한 충전도와 온도수치가 기록된다. 다음 단계에서는 그 결과별 입력으로 하여 복셀 단위로 주울 형태를 복원한다. 이 때 유통진행에 따른 각 단계에서 각 복셀의 충전여부와 온도수치를 색상에 대응시켜 복셀의 색상을 결정한다. 복원 모델은 수평형 가상현실 디스플레이 장치인 Projection Table 상에서 가시화 하였으며 액티브 스테레오 방식으로 입체화면을 제공한다.

• 한국식품영양과학회지
• /
• 제31권1호
• /
• pp.50-56
• /
• 2002

달팽이 내장을 마쇄, 추출, 염석 및 투석 후 얻은 조효소액을 두 번의 이온교환 크로마토그래피 및 두 번의 겔여과 크로마토그래피를 거쳐 최종적으로 얻은 $\beta$-galactosidase의 비활성도는 18.8 units/mg protein이었고, 정제도는 31.3%배, 수율은 20.8%이었다. $\beta$-Gallactosidase의 분자량을 측정하기 위해 겔 여과와 전기영동을 실시한 결과, native molecular weight가 약 144,000으로, SDS-PAGE 결과, 약 72,000으로 나타나 이 효소는 동일한 polypeptide로 구성된 dime로 추측되었으며, 등전점은 pI 4.1이었다. $\beta$-Galactosidase의 최적 pH와 온도는 각각 pH 3.0과 6$0^{\circ}C$로 측정되었으며, pH 2.0~8.0에서 80%이상의 효소 활성을 나타내었고, 온도 30~5$0^{\circ}C$에서 안정되었다. 모든 금속이온과 fructose, glucose, galactose, maltose 및 xylose는 $\beta$-galactosidase의 저해제로 작용하였다.