• 전자공학회논문지A
• /
• 제31A권10호
• /
• pp.79-86
• /
• 1994

Gain-guided broad-area single quantum well separate confinement heterostructure diode lasers have been fabricated from structures grown by metal organic vapor phase epitaxy. The active layer of the epi-structure is InGaAs emitting 962-965nm and the guiding layer GaAs. The channel width is fixed to 150${\mu}$m and the cavity length varys within the range of 300~800${\mu}$m. For uncoated LD's, the output power of 0.7W has been obtaained at a pulsed current level of 2A, which results about 60% external quantum efficiency. The threshold current density is 200A/cm$^{2}$ for the cavity lengths of 800.mu.m LD's. The stain effect upon the transparent current density has been observed. The internal quantum efficiency is expected to be 88% and the internal loss to be 18$cm^{-1}$. The beam divergence has been measured to be 7$^{\circ}$to lateral and 40$^{\circ}$to transverse direction. finally, 1.2W continuous-wave output power has been obtained at a current level of 2A for AR/HR coated LD's die-bonded on Cu heat-sink and cooled by TEC.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.185-197
• /
• 1996

We have adopted the strain compensated PBH(planar buried heterostructure) - LD in which the MQW active layer consisted of 1.4% compressively strained GainAsP (E$_{g}$ = 0.905eV) wells and 0.7% tensile strained GaInAsP(E$_{g}$ = 1.107eV) barriers grown by metal organic vapor phase epitaxy (MOVPE). We hav einvestigated effects of number of wells and the structure of the separate confinement heterostructure (SCH) layer in the strain-compensated MQW-PBH-LD. The threshold current, the external quantum efficiency, the transparency current density J$_{o}$, and the gain constant .beta. have been evaluated for uncoated MQW-PBH-LD. As the number of wells increases, the internal quantum efficiency and the transparency current density decreases, whereas the gain contant increases. The small width of the SCH layer shows the large internal quantum efficiency. The small internal loss and the large gain constant have been obtained by inserting the large bandgap SCH layer.

• 한국결정성장학회지
• /
• 제20권2호
• /
• pp.74-79
• /
• 2010

The synthesis and reactivities of molybdenum carbide crystallites were examined in this study. Especially, the effect of synthesis conditions were scrutinized on the preparation of molybdenum carbide crystallites. In order to perform this purpose, various characterization techniques such as BET surface area and oxygen uptake measurements were employed for the synthesized molybdenum carbide crystallites. First of all, the molybdenum carbide crystallites were synthesized using molybdenum oxide crystallites and methane gas or methane-hydrogen mixture. The experimental results showed that BET surface areas ranged from $7.4m^2/g$ to $31m^2/g$ and oxygen uptake values varied from $8.1{\mu}mol/g$ to $24.3{\mu}mol/g$. The Mo compounds were found to be active for ammonia decomposition reaction. Even though there are some molybdenum carbide crystallites that were exceeded by Pt/$Al_2O_3$ crystallite, the steady state reactivities for other molybdenum carbide crystallites were comparable to or even higher than that determined for the Pt/$Al_2O_3$ crystallite. These results implied that molybdenum carbide crystallites could be one of the promising crystallites that might be substitutes for Pt-like noble metal crystallites in the petroleum processes.

• 천문학회보
• /
• 제39권2호
• /
• pp.61.1-61.1
• /
• 2014

IC 10 is one of the most well-known irregular starburst dwarf galaxies in the Local Group. Its low metal and oxygen abundance together with proximity make it an excellent laboratory to test star formation models, especially in low-metallicity systems like galaxies in the early Universe as well as many other local dwarfs. Among a number of active star forming regions, we have detected H2O kilo-maser emission in the south-east region of IC 10(IC 10 SE) using the Korean VLBI Network(KVN). This maser line is likely to be associated with a giant molecular cloud identified in IC 10 SE by former CO studies. Using the HI and CO data from the VLA and SMA archive, we probe the atomic and molecular gas properties of IC 10 SE. We discuss how the cool gas morphology and kinematics are related with maser and star formation activity in IC 10 SE.

• 한국세라믹학회지
• /
• 제32권6호
• /
• pp.659-668
• /
• 1995

Zirconium carbide was prepared from the mixture of metal zirconium and carbon powders in argon atmosphere by Self-propagating High-temperature Synthesis (SHS) in order to obtain the best carbon source and dilution contents. The most exellent result was obtained in the case that active carbon was added as a starting material, 20~30 wt% dilution content. From thermal profile analysis an apparent activation energy of 118 KJ/mol was calculated. The maximum heating rate achieved during 15 wt% ZrC reaction by product dilution method was approximately 1.54$\times$105 K/s. Coupling this value with the measured wave velocity of 1.026cm/s yielded a maximum thermal gradient fo $1.5\times$105 K/cm. Using the definition of t* and the measured wave velocity, the effective thermal diffusivity, $\alpha$, was calculated to be 0.62$\times$102 $\textrm{cm}^2$/s.

• Fibers and Polymers
• /
• 제4권1호
• /
• pp.27-31
• /
• 2003

A major concern in solvent extraction process is the loss of extractant into the aqueous phase due to its slight solubility in the aqueous phase. Similarly, in membrane extraction processes, extractant loss through extractant leakage from the membrane into the aqueous phase is also a concern. Several published membrane extraction studies using Aliquat 336 ai the extractant, have expressed this concern, but none has studied extractant leakage quantitatively. It is the authors' opinion that the extractant leakage should be considered at a technical parameter of a membrane. In our laboratory active progress has been made in using Aliquat 336 ‘entangled’ into the polymer membranes to remove heavy metal ions from wastewater samples. In this work, we studied the loss of Aliquat 336 from the point of view of its solubility in aqueous solutions. The results showed that the solubilities or Aliquat 3,36 in an aqueous phase acidified with 2 M HCI it about 0.1 g/100 m/ of the solution. This figure provides a useful guideline for evaluating the leakage of the Aliquatoat 336 extractant from the membranes.

• Preventive Nutrition and Food Science
• /
• 제7권4호
• /
• pp.417-420
• /
• 2002

A strong fibrin-specific fibrinolytic enzyme was produced from Bacillus subtilis KH-4 isolated from Deonjang, a Korean fermented soybean paste similar to Japanese miso. The addition of glucose as a carbon source resulted in the highest levels of caseinolytic and fibrinolytic activities. Likewise, the addition of yeast extract as the nitrogen source resulted in the highest caseinolytic and fibrinolytic activities (3473.2 unit and 47.4 munit, respectively), It was observed that out of all metal ion sources only calcium (chloride) enhanced caseinolytic and fibrinolytic activities, with increases of 4949.3 unit and 58.2 unit/mg, respectively. The optimal temperature for the production of the enzyme was found to be 4$0^{\circ}C$ in the optimal medium (glucose 20 g, yeast extract 5 g, CaCl$_2$l g, and NaCl 2 g). The maximum fibrinolytic activity was observed at the late stationary phase. B. subtilis KH-4 produced a fibrinolytic enzyme at 4$0^{\circ}C$, after 30 h growth, which increased up to 54 h and then remained constant. These results suggest that Deonjang has potential as a source of physiologically active anti-thromotic enzymes.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.136-137
• /
• 2015

이온성 고분자 금속 복합체(Ionic polymer metal composite, IPMC)는 전기 활성 고분자(Electro active polymer, EAP)중의 하나로 IPMC의 양 전극에 전기적인 자극을 가하면 굽힘 변형이 발생하고, 반대로 기계적인 자극이 주어지면 양 전극 사이에 전위차가 발생하여 전기를 얻을 수 있어 차세대 액추에이터와 센서로의 적용이 가능하다. 본 논문에서는 IPMC를 센서 소재로 사용하여 해양 환경 모니터링 센서에 전원을 공급하는 장치 개발을 설명하고자 한다.

• 천문학회보
• /
• 제37권1호
• /
• pp.32.1-32.1
• /
• 2012

Radial color gradient of disk galaxies has been a key tool for diagnosing the ages and metallicities of the stars and gas of these galaxies, and thus, the formation process of these disks. In many cases, observational data support the 'inside-out' picture of disk galaxy formation proposed by Larson (1976). In this scenario, gas within dark matter halos cools and accretes on to the outer disk while enhancing star formation in the disk. Recent discoveries of "extended ultra-viloet" (XUV) disks also show that majority of disk galaxy experience active star formation within out disks where gas surface density is quite low (Thilker et al. 2007; Gil de Paz et al. 2007). However, neither gas, nor stars stay put within galaxies. They rather migrate into bulges, disperse throughout galaxies, or flow into and out of galaxies via various mechanisms. There have been a few notable studies to investigate how radial star formation and metal abundance gradients vary across populations of disk galaxies systematically. However, the mechanisms driving gas transport are still poorly understood. Cross-matching various galaxy catalogs including KVAGC and UKIDSS, we are investigating if color gradients of late-type galaxies depend on their physical properties, especially on environmental properties. We will present the result from the pilot study on Karachentsev isolated galaxy catalog.

• BMB Reports
• /
• 제39권5호
• /
• pp.571-577
• /
• 2006

Dendrolimus punctatus tetravirus (DpTV) has been identified as a new member of the genus Omegatetravirus of the family Tetraviridae that may be related serologically to Nudaurelia capensis virus ($N{\omega}V$). To establish the function of DpTV RNA genome and to better understand the mechanism of viral replication, the putative RNA-dependent RNA polymerase (RdRp) domain has been cloned and expressed in Escherichia coli. The recombinant protein was purified on a Ni-chelating HisTrap affinity column and demonstrated to initiate viral RNA synthesis in a primer-independent manner but not by terminal nucleotidyle transferase activity in the presence of $Mg^{2+}$ and RNA template. Mutation of the GDD to GAA interferes with the residues at the polymerase active site and metal ions, and thus renders the polymerase inactive.