• Wind and Structures
• /
• 제2권1호
• /
• pp.69-83
• /
• 1999

The most common used control device on tall buildings and high-rise structures is active and passive tuned mass damper (ATMD and TMD). The major advantages of ATMD and TMD are discussed. The existing installations of various passive/active control devices on real structures are listed. A set of parameter optimization methods is proposed to determine optimal parameters of passive tuned mass dampers under wind excitation. Simplified formulas for determining the optimal parameters are proposed so that the design of a TMD can be carried out easily. Optimal design of wind-induced vibration control of frame structures is investigated. A thirty-story tall building is used as an example to demonstrate the procedure and to verify the efficiency of ATMD and TMD with the optimal parameters.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.638-648
• /
• 2003

An active capacitance circuit is analyzed in depth and its application to active RF BPF with low noise figure is discussed. The characteristics of the active capacitance circuit made of FET[1] exhibits negative resistance and conventional capacitance, which is easily controlled. However, it is difficult to make the negative resistance adequate in the designated frequency range due to the lack of detailed analysis, which could make an active circuit unstable as the frequency is going higher or lower. In this paper, we analyzed the negative resistance characteristics of active capacitance circuits and also presented the method that the flatness of passband can be controlled. Finally we have designed a 4-stage active BPE, which results in bandwidth of 100 MHz, 0,04 dB insertion loss, 0.2 dB ripple, and noise figure of 2.4 dB at 1.75 GHz band.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.406-411
• /
• 2005

In this paper, we propose an active 90$^{\circ}$ phase divider for application to MMIC. Because of their very large size, conventional passive 90$^{\circ}$ dividers can't be integrated on MMIC. Therefore, highly miniaturized 90$^{\circ}$ dividers are required for a development of highly integrated MMIC. For this reason, active 90$^{\circ}$ divider is indispensable because active phase divider is much smaller than conventional passive dividers, and it can be integrated on MMIC. In this work, we developed active 90$^{\circ}$ divider with emitter inductor, and it was employed for the operation of the balanced mixer in order to verify the performance of the active 90$^{\circ}$ divider. According to the results, it was found that the active 90$^{\circ}$ divider exhibited good RF performances comparable to conventional passive power dividers.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1289-1302
• /
• 2019

In this paper, an optimal allocation method of a hybrid active power filter in an active distribution network is designed based on the differential evolution algorithm to resolve the harmonic generation problem when a distributed generation system is connected to the grid. A distributed generation system model in the calculation of power flow is established. An improved back/forward sweep algorithm and a decoupling algorithm are proposed for fundamental power flow and harmonic power flow. On this basis, a multi-objective optimization allocation model of the location and capacity of a hybrid filter in an active distribution network is built, and an optimal allocation scheme of the hybrid active power filter based on the differential evolution algorithm is proposed. To verify the effect of the harmonic suppression of the designed scheme, simulation analysis in an IEEE-33 nodes model and an experimental analysis on a test platform of a microgrid are adopted.

• 한국정보통신학회논문지
• /
• 제10권6호
• /
• pp.1147-1152
• /
• 2006

본 논문에서는 스카이훅댐퍼 시스템의 해석 및 설계에 능동 서스펜션 강인제어 이론을 적용하여 현가장치설계에 응용 할 수 있는 이론 및 실험적 제어 장치 적용에 관한 연구를 수행하였다. 최근의 현가장치설계에서는 강성과 감쇠를 능동적으로 제어하는 기술의 적용이 일반화되고 있으며, 다른 차량안정성제어장치와의 연계성이 높아짐에 따라, 제어시스템설계에서 보다 내구성이 강하고 제어효과의 응답성이 빠르며 정도 또한 높은 제어장치의 필요성이 요구되고 있다. 본 연구는 센서의 위치 관계에 따른 능동현가시스템을 해석하여 위와 같은 빠른 응답성과 높은 정도의 제어가 가능한 제어시스템을 해석, 설계하기 위하여 강인제어시스템의 적용에 관한 고찰을 하였다. 그리고 제어대상시스템에 대한 강인제어시스템을 설계하기 위한 모델링 및 적용방법을 수식적으로 해석하였으며, 스카이훅현가장치의 제어시스템설계에 중요한 내외란성 향상을 위한 강인제어 시스템설계에 적용하는 방법에 관해 고찰하였다.

• 패션비즈니스
• /
• 제25권5호
• /
• pp.1-24
• /
• 2021

This study aimed to explore the fashion design and style features, and differences in BLACKPINK, TWICE, and Red Velvet girl groups. A total of 469 fashion photos (132 BLACKPINK, 217 TWICE, 120 Red Velvet) focusing on 23 title songs (7 BLACKPINK, 9 TWICE, 7 Red Velvet) were collected. Photo classification work was carried out in accordance with the design analysis criteria and the results were derived by combining statistical analysis and content analysis. BLACKPINK's fashion design characteristics showed a lot of complex colors, shade tone, pure tone, contrast color coordination, stylistic pattern, slit, patchwork, checklist method, sexy and avant-garde images. TWICE's fashion design characteristics included warm color, complex color, tint tone, monotone, contrast color coordination, tone-on-tone, geometric & stylistic patterns, cotton, silk, a combination of the same material, frill, beads, ribbon decoration, blouse, skirt, and many romantic and ethnic images. Red Velvet's fashion design characteristics were a cold color, moderate tone, monotone, cotton, velvet, geometric pattern, zipper, sequins, T-shirt, pants, tie, belt, and many retro and active images. The fashion styles of BLACKPINK, TWICE, and Red Velvet were as follows. BLACKPINK was divided into sexy avant-garde, sexy active, sexy romantic styles. TWICE was divided into romantic active, romantic classical, and romantic ethnic styles. Red Velvet was divided into retro active, retro sexy, and retro avant-garde styles.

• 정보보호학회논문지
• /
• 제19권6호
• /
• pp.113-119
• /
• 2009

최근 국내는 전자정부 인터넷 뱅킹 포털 등 대부분의 웹 사이트에서 다양하고 동적인 온라인 서비스 제공을 위해 ActiveX Control을 개발 배포하고 있다. 하지만, 안전성이 검증되지 않은 ActiveX Control은 인터넷 사용자들에게 심각한 보안위협요소가 될 수 있다. 최근 이러한 취약한 ActiveX Control로 인한 해킹 사고가 급격히 증가되고 있음에도 불구하고, 개인 PC 보안의식에만 의존할 뿐 이에 대한 국가적인 보안정책이나 대책이 마련되어 있지 않다. 이에, 본 논문에서는 ActiveX Control 개발 배포 사용의 3가지 측면 모두에서 안전하고 효율적인 보안관리가 가능한 보안인증을 통한 ActiveX Control 보안관리 모델 설계를 위한 기술적 방법론을 제안하고자 한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2629-2632
• /
• 2003

This paper presents the harmonics rejection technique and the simulation of a active power filter using power operational amplifier. The proposed active power filter consists of CT(current transformer), harmonics detector and harmonics amplifier. The harmonics detector is a high pass filter using a GIC(Generalized Impedance Converter). The harmonics amplifier consists of a power operational amplifier and passive filters. The simulation has been implemented by OR-CAD program. It is examined whether the proposed active power filter can be realized or not through simple experiments.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.761-764
• /
• 1995

This paper demonstrates the feasibility of utilizing Shape Memory Alloy(SMA) actuators in controlling the motion of micro active catherer. The dynamic behavior of SMA is obtained by several experiments for the design of the controller. Two different type of structures which realize catheter are proposed. Each prototype of micro active catherer is fabricated, and its control performance which used the designed controller is investigated. The results obtained show the potential of the SMA as viable means for actuating the micro active catheter.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.664-669
• /
• 1998

This research is concerned with the active vibration controller design for smart structures by a modified LQG controller. The smart structure is defined as the structure equipped with smart actuators and sensors. Various analog and digital control, techniques aimed for the piezoceramic sensors and actuators have been proposed for the active vibration control of smart structures. In this paper, the modified LQG controller is developed for the active vibration suppression of smart structures to implement the predefined decay rate on modal displacements. The proposed modified LQG controller proved its effectiveness by experiments.