• 제목/요약/키워드: Active Cancellation

검색결과 113건 처리시간 0.026초

CDMA시스템에서 지연 시간을 향상시킨 순차적 간섭 제거기에 관한 연구 (A study on the SIC with the improved delay time in CDMA System)

  • 최병구;박용완
    • 대한전자공학회논문지TC
    • /
    • 제37권7호
    • /
    • pp.1-8
    • /
    • 2000
  • 본 논문에서는 CDMA 시스템에서 다중 사용자 검출을 위해 수신신호를 나누는 개념과 순차적 간섭 제거기를 조합한 새로운 간섭 제거기를 제안한다. 본 간섭 제거기에서 수신신호를 첫 번째 그룹의 입력 신호로 이용하며, m개의 그룹들을 통과해서 m개의 그룹 출력 신호들은 만들어진다. e번째 그룹의 출력 신호를 제외한 모든 그룹의 출력 신호들은 더해져서 수신신호로부터 제거되고 그로부터 얻어지는 신호는 번째 순차적 간섭 제거기의 입력 신호로 이용된다. 컴퓨터 시뮬레이션 및 구조분석을 통해서 향상된 순차적 간섭 제거기가 비트 오율과 복잡성의 면에서 순차적 간섭 제거기의 성능을 유지시키는 동시에 순차적 간섭 제거기의 지연시간에 대한 단점을 향상시킴을 보여준다.

  • PDF

항력저감을 위한 굽은 난류채널 유동제어 (Control of Turbulent Curved Channel Flow for Drag Reduction)

  • 최정일;성형진
    • 대한기계학회논문집B
    • /
    • 제26권9호
    • /
    • pp.1302-1310
    • /
    • 2002
  • A direct numerical simulation in turbulent curved channel flow is performed. The drifting Taylor-Gortler vortices are identified by applying a conditional averaging. A new algorithm is proposed based on the wavelet transform of the wall information. A continuous wavelet transform with Marr wavelets is employed to decompose the flow signals at a chosen length scale. An active cancellation is applied to attenuate the Taylor-Gortler vortices and to reduce the wall skin friction.

주기적 저주파 잡음제거를 위한 부밴드 능동잡음제어 (Sub-band Active Noise Control for Periodic Low-frequency Noise Cancellation)

  • 최훈;박봉수;윤병연;김대성;배현덕
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
    • /
    • pp.15-18
    • /
    • 2000
  • 회전기에서 발생하는 소음성 잡음의 경우 능동잡음 제어를 이용 진폭이 상대적으로 큰 주기성 저주파 잡음 제어로 상당한 감쇄효과를 얻을 수 있다. 본 논문에서는 주기적 저주파 잡음을 효과적으로 제거하는 부밴드 능동잡음제어 구조를 제안하였다 이 구조에서는 QMF를 이용, 진폭이 큰 주기적 저주파신호를 분리하여 적응측엽제거 원리를 적용하여 저주파 신호를 제거한다. QMF에서 발생하는 지연은 각 필터를 통과한 신호경로에 적응필터를 사용하여 보상하였다. 그리고 적응필터 성능향상을 위해 최적 적응이득을 해석적으로 구하여 사용하였다.

  • PDF

유연 구조물의 능동 반력 제어기 설계 (Active Control of Reaction Forces for Flexible Structures)

  • 김주형
    • 소음진동
    • /
    • 제11권1호
    • /
    • pp.68-75
    • /
    • 2001
  • A method for actively controlling dynamic reaction forces in flexible structures subject to persistent excitations is presented. Since reaction forces are not directly measured in flexible structures, reaction forces are estimated by using the Kalman filter. The estimated reaction force is used as an error signal in the adaptive feedforward disturbance cancellation controller. In order to compensate the static effect of the truncated modes in the reaction forces, the residual flexibility matrix is used with the Kalman filter. The paper presents the formulation of the reaction forces in conjunction with the Kalman filter estimator and the adaptive feedforward controller. The results show that the dynamic reaction forces at its supports in a flexible beam test rir are well suppressed.

  • PDF

웨어러블 기기를 위한 낮은 계산량을 갖는 운동 중 심박수 추정 알고리즘 (Low Complexity Heart Rate Estimation Algorithm for Wearable Device)

  • 백현재;조재걸
    • 전기학회논문지
    • /
    • 제67권5호
    • /
    • pp.675-679
    • /
    • 2018
  • A novel heart rate estimation algorithm is presented based on normalized least-mean-square (NLMS) algorithm. This paper presented a three-step processing scheme for estimating heart rate from PPG signal with motion artifacts. The proposed active noise cancellation algorithm has low computational complexity compared to the NLMS algorithm. Experimental results show that the proposed algorithms perform similar with the previous algorithm under motion artifact noises.

Spatially filtered multi-field responses of piezothermoelastic cylindrical shell composites

  • Tzou, H.S.;Bao, Y.
    • Structural Engineering and Mechanics
    • /
    • 제4권2호
    • /
    • pp.111-124
    • /
    • 1996
  • New active "intelligent" structural systems with integrated self-sensing, diagnosis, and control capabilities can lead to a new design dimension for the next generation high-performance structures and mechanical systems. However, temperature effects to the piezoelectric transducers are not fully understood. This paper is concerned with a mathematical modeling and analysis of a laminated piezothermoelastic cylindrical shell composite exposed to mechanical, electric, and thermal fields. Generic shell equations and solution procedures are derived. Contributions of spatial and time components in the mechanical, electric, and temperature excitations are discussed, and their analytical solutions derived. A laminated cylindrical shell composite with fully distributed piezoelectric layers is used in a case study; its multi-field step and impulse responses are investigated. Analyses suggest that the fully distributed actuators are insensitive to even modes due to load averaging and cancellation. Accordingly, these even modes are filtered from the total response and only the modes that are combinations of m = 1, 3, 5, ${\cdots}$ and n = 1, 3, 5, ${\cdots}$ participating in dynamic response of the shell.

생명신호 측정용 반사형 광용적맥파 측정기의 움직임에 의한 신호왜곡 제거 (Development of Reflected Type Photoplethysmorgraph (PPG) Sensor with Motion Artifacts Reduction)

  • 한효녕;이연주;김정식;김정
    • 한국정밀공학회지
    • /
    • 제26권12호
    • /
    • pp.146-153
    • /
    • 2009
  • One of the most important issues in the wearable healthcare sensors is to minimize the motion artifacts in the vital signals for continuous monitoring. This paper presents a reflected type photoplethysmograph (PPG) sensor for monitoring heart rates at the artery of the wrist. Active noise cancellation algorithm was applied to compensate the distorted signals by motions with Least Mean Square (LMS) adaptive filter algorithms, using acceleration signals from a MEMS accelerometer. Experiments with a watch type PPG sensor were performed to validate the proposed algorithm during typical daily motions such as walking and running. The developed sensor is suitable for ubiquitous healthcare system and monitoring vital arterial signals during surgery.

Active Cancellation of PMSM Torque Ripple Caused by Magnetic Saturation for EPS Applications

  • Lee, Geun-Ho
    • Journal of Power Electronics
    • /
    • 제10권2호
    • /
    • pp.176-180
    • /
    • 2010
  • This paper deals with a control method to reduce the torque ripple of a permanent magnet synchronous motor (PMSM) for electric power steering (EPS) systems. Such an application requires a very low torque ripple in order to maintain a good steering feel. However, because of spatial limitations, it cannot help having a partial saturation in the iron core of the PMSM for an EPS system, and this saturation results in a significant torque ripple. Thus, this paper analyzes the torque ripple caused by the magnetic saturation of a PMSM and proposes a method with respect to inductance measurement to verify the partial saturation. In addition, it is shown that a compensation current is needed in order to minimize the torque ripple when a PMSM is driven in the high torque region. The estimation process of the current and the torque ripple decreased by the current are presented and verified with test results.

ANC의 빠른 수렴을 위한 적응 필터 초기화 기술 (Adaptive Filter Initialization for Fast Convergence of Active Noise Cancellation)

  • 김상민;한석현;박호종
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송∙미디어공학회 2020년도 하계학술대회
    • /
    • pp.346-347
    • /
    • 2020
  • 본 논문에서는 ANC 시스템의 빠른 수렴을 위한 적응 필터의 초기화 방법을 제안한다. 기존 ANC 시스템은 적응 필터의 계수를 0으로 초기화한다. 이러한 초기화 방법은 일반적으로 발생하는 외부 소음의 특성을 고려하지 않은 방법으로 ANC의 수렴 소요시간이 길다. 이와 같은 문제를 해결하고자 본 논문에서는 핑크 노이즈를 입력으로 ANC를 수행하여 얻은 적응 필터의 계수 값을 초기값으로 사용하는 새로운 초기화 방법을 제안한다. 제안한 방법으로 여러 잡음에 대해 실험한 결과, 낮은 초기 에러를 갖고 기존 방법보다 빠르게 수렴하는 것을 확인하였다. 또한, 기존 방법에서 수렴하지 못한 일부 소음에 대해서도 수렴하는 것을 확인하였다.

  • PDF

LSTM 기반 ANC를 이용한 외부 소음 저감에 관한 연구 (External Noise Reduction with LSTM-Based ANC)

  • 장준영;조현준;김환웅;강승훈;김정민
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2023년도 추계학술발표대회
    • /
    • pp.1108-1109
    • /
    • 2023
  • 본 논문은 선박 내부 소음을 효과적으로 감소시키기 위한 ANC(Active Noise Cancellation)및 인공 지능 (AI) 결합 시스템의 개발과 적용에 관한 연구를 다룬다. 선박 환경에서의 소음은 승원의 스트레스 증가와 불편을 초래하므로, 이를 해결하기 위한 방법을 제안하고자 한다. 외부 소음과 내부 소음 데이터를 수집하고, STFT(Short-Time Fourier Transform)알고리즘을 통해 소음 데이터를 분석 가능한 형태로 전처리한다. 그 후, LSTM(Long Short-Term Memory)알고리즘을 사용하여 선박 외부에서 발생한 소음을 입력으로 받아 내부에서 들리는 외부 소음을 예측하고 제어하는 모델을 훈련시킨다. 이후 최적화 과정을 거쳐 예측 소음의 반대 파형을 생성 및 출력을 통해 ANC 를 구현한다.