• 한국산림과학회지
• /
• 제83권2호
• /
• pp.175-190
• /
• 1994

산지사면붕괴(山地斜面崩壞)에 의(依)한 피해(被害)를 예방(豫防) 또는 극소화(極小化)하기 위(爲)하여 산사태(山沙汰)가 자주 발생(發生)하는 지역(地域)을 중심(中心)으로 각(各) 조사(調査) 단위사면(單位斜面)에 대(對)하여 산지사면붕괴(山地斜面崩壞)에 영향(影響)하리라고 예상(豫想)되는 12개(個) 환경요인(環境要因)을 현지조사(現地調査)하고 붕괴(崩壞)와 환경인자(環境因子)와의 관계(關係)를 수량화(數量化) 이론(理論)에 의(依)한 방법(方法)으로 분석(分析)하여 산사태발생(山沙汰發生)의 위험도(危險度)를 평가(評價)할 수 있는 예측(豫測)모델을 도출(導出)하였으며, 또한 이를 기초(基礎)로 하여 위험도(危險度)를 각(各) 급별(級別)로 구분(區分)하고 예지(豫知)모델을 검토(檢討)하였던 바 그 결과(結果)을 요약(要約)하면 다음과 같다. 산지붕괴발생면적(山地崩壞發生面積)에 영향(影響)을 주는 인자(因子)는 강우(降雨), 령급(齡級), 표고(標高), 토성(土性), 경사(傾斜), 사면위치(斜面位置), 임상(林相), 곡차수(谷次數), 종단사면형(縱斷斜面形), 모암(母岩), 토심(土深), 방위(方位)의 순(順)이었으며, 편상관계수(偏相關係數)에 의(依)한 인자(因子)는 령급(令級), 강우(降雨), 토성(土性), 모암(母岩), 경사(傾斜), 사면위치(斜面位置), 표고(標高), 종단사면형(縱斷斜面形), 곡차수(谷次數), 임상(林相), 토심(土深), 방위(方位)의 순(順)으로 나타났다. 또한 산지붕괴발생빈도(山地崩壞發生頻度)에 의(依)한 인자(因子)의 순위(順位)는 령급(令級), 표고(標高), 토성(土性), 경사도(傾斜度), 식생(植生), 강우(降雨), 종단사면(縱斷斜面), 곡차수(谷次數), 모암(母岩), 토심(土深)이었으며 사면위치(斜面位置) 및 방위(方位)는 기여도(寄與度)가 낮게 나타났다. 산지사면붕괴위험(山地斜面崩壞危險) 예지(豫知)를 위(爲)하여 붕괴발생면적(崩壞發生面積)에 의(依)한 예측(豫測)모델에서 위험도(危險度) 예측점수표(豫測點數表)를 작성(作成)할 수 있었으며, 점수합계(點數合計)가 9.1636이면 붕괴발생위험(崩壞發生危險)이 높은 것으로 평가(評價)되었으며 산지(山地) 사면붕괴(斜面崩壞)가 발생(發生)한 사면(斜面)과 발생(發生)하지 않은 사면(斜面)에 의(依)한 예측(豫測)모델에서 우사면(雨斜面)에 대(對)한 사면판별(斜面判別) 구분치(區分値)는 -0.02였고, 그 적중율(適中率)은 73%로 높았다. 또한 판별구분치(判別區分値)를 기준(基準)으로 한 산지사면붕괴발생(山地斜面崩壞發生) 위험도별(危險度別) 점수(點數)는 A급(級)은 0.3132 이상(以上)이었고, B급(級)은 0.3132~-0.1051, C급(級)은 -0.1050~-0.4195, D급(級)은 -0.4195 이하(以下)였다. 그리고 산지사면붕괴발생(山地斜面崩壞發生)의 예지(豫知)는 판별구분치(判別區分値)를 기준(基準)으로 위험도(危險度)을 A, B, C, D의 4등급(等級)으로 구분(區分)할 수 있었으며, 총(總) 300개(個) 사면(斜面) 중(中) A급사면(級斜面) 68개(個), B급사면(級斜面) 115개(個), C급사면(級斜面) 65개, D급사면(級斜面) 52개(個)였다. 위험도(危險度) A, B급(級)에서의 산사태발생(山沙汰發生)은 150개(個) 붕괴지(崩壞地) 중 125개(個)로서 약(約) 83.3%의 높은 적중율(適中率)을 보여 예측(豫測)모델로서 응용(應用) 가능성(可能性)이 높게 나타났다. 따라서 이러한 예지방법(豫知方法)에 의(依)하여 선정(選定)한 위험(危險)한 지역(地域)에 대(對)하여 산지재해위험도(山地災害危險度) 지도(地圖)를 작성(作成)하여 토지이용(土地利用) 계획(計劃) 및 재해위험지(災害危險地) 선정기준(選定基準)의 행정지표(行政指標)로서 활용(活用)할 수 있을 것이다. 또한 산지재해(山地災害)에 대(對)한 종합(綜合) 대책(對策)에 유용(有用)하게 활용(活用)함으로써 막대(莫大)한 재산(財産) 피해(被害)와 인명(人命) 손실(損失)을 사전(事前)에 방지(防止)할 수 있을 것이다.

• 마케팅과학연구
• /
• 제20권3호
• /
• pp.269-277
• /
• 2010

现有文献表明, 影响服务业顾客忠诚的最重要因素是服务质量. 然而, 在服务质量是直接还是间接影响顾客忠诚方面, 学者们的观点有着明显的分歧. 目前, 中国国内专门针对移动通信行业服务质量与顾客忠诚之间关系的文章较少. 此外, 以往相关文献多是将顾客忠诚作为一个整体变量进行研究, 没有进一步将其细分为多个维度. 基于此, 本文拟通过实证研究来探析移动通信业服务质量各维度与顾客忠诚各维度之间的直接和间接影响机理, 其中选择顾客满意作为二者关系的中介变量, 希望研究结论能给国内移动通信企业的服务管理提供有效的理论指导. 为了使搜集到的数据有效, 本次调研范围仅限于黑龙江哈尔滨市, 调查对象为移动通信公司的用户. 本次调研采取随机抽样的方式, 共发放问卷350份, 收回问卷325份, 回收率为 92.9%. 剔除无效问卷, 有效问卷为289份, 即有效回收率为82.6%. 本文借鉴国内外现有文献所使用的量表, 这些量表已经在实证研究中得到验证. 本文提出六个假设, 总体而言, 只有四个假设没有得到支持. 为了验证服务质量构成要素量表的合理性, 本文对289份有效样本进行探索性因子分析. 同样, 对顾客忠诚的维度进行检验. 本研究采用Cronbach's ${\alpha}$系数来评价量表的信度. 本研究从内容效度, 结构效度和聚合效度三方面对问卷进行效度检验. 本研究对数据和模型的拟合优度进行检验, 以提高假设检验的准确程度. 通过文献资料的收集, 整理及数据处理, 本文提出了服务质量五维度模型以及服务质量与顾客忠诚度之间相互关系模型, 通过实证分析验证了有形性, 可靠性, 反应性, 保证性和关怀性是服务质量的五个构成要素, 验证了PZB对于服务质量的SERVQUAL的测量方法, 研究了移动通信服务质量各维度对顾客忠诚各维度的直接影响机理, 以及服务质量各维度如何通过顾客满意这一中介变量对顾客忠诚各维度的间接影响机理, 建立了相应的关系模型,并运用结构方程分析方法,对模型进行实证检验, 得出如下研究结论: 第一, 移动通信服务质量由有形性, 可靠性, 响应性, 保证性和移情性五个要素构成, 顾客忠诚由态度忠诚和行为忠诚两个维度构成. 在PZB设计的SERVQUAL量表基础上, 本文针对移动通信行业设计了服务质量测量量表, 通过探索性因子分析得出五个因子. 这五个因子与五构成要素基本一致, 说明服务质量五要素概念适用于移动通信行业. 同样, 对顾客忠诚量表进行因子分析, 得出两个因子, 与本文中的态度忠诚和行为忠诚相一致. 第二, 移动通信服务质量对顾客忠诚存在直接和间接的正向影响作用. 其中, 服务质量对态度忠诚有直接和间接的正向作用, 间接作用是通过顾客满意这一中介变量影响的; 服务质量对行为忠诚有直接和间接的正向作用, 间接作用是通过顾客满意和态度忠诚这两个中介变量影响的. 这说明移动通信服务质量越好, 顾客的满意度越高, 其对服务提供商的态度就越积极, 在行为上就越容易表现出对服务提供商的忠诚. 而且, 服务质量各维度对顾客忠诚各维度的影响机理是不同的, 比如: 有形性对顾客满意有直接的正向作用, 但对顾客忠诚却没有显著的直接作用; 保证性对顾客满意没有显著的直接作用, 但对顾客忠诚有直接和间接的正向作用. 第三, 顾客满意在移动通信服务质量与态度忠诚, 行为忠诚之间的具有显著的中介作用, 这说明服务质量的提高可以增加顾客的满意度, 而满意的顾客更容易成为忠诚的顾客; 而态度忠诚在移动通信服务质量与行为忠诚之间的具有显著的中介作用, 这说明顾客行为上表现出忠诚可能是虚假忠诚, 只有态度和行为都忠诚的顾客才是真正的忠诚顾客. 本文的研究结论对中国及其它国家的电信运营商如何提升服务质量有一定的借鉴意义. 本文存在两方面的局限性: 首先, 本研究仅在黑龙江哈尔滨地区进行问卷调研, 针对移动公司用户, 统计数据会存在一定的抽样误差, 影响最终的统计分析结果. 第二, 本研究主要探讨了服务质量对顾客忠诚的影响关系, 并引入了顾客满意作为中介变量, 但没有考虑其他可能影响顾客忠诚的因素, 例如顾客价值, 消费者特征等.

• 트랜스-
• /
• 제3권
• /
• pp.109-135
• /
• 2017

본 논문의 목적은 스티브 팩스톤의 작품에서 드러난 일상적 움직임 특성을 분석하는 것이다. 예술작품은 오랜 시간동안 고급문화로서 높은 계층의 사람들에게만 향유되는 특별한 대상으로서 인식되어왔다. 일상과 예술의 간극은 크게 존재해왔고 때문에 예술작품에서 일상적인 요소의 출현은 사회적 변화를 수반한 대중의 인식전환을 의미한다. 예술과 일상의 경계가 불분명해지는 시대로서 포스트모더니즘의 시대는 2차 세계대전 이후의 전후사회 그리고 후기 자본주의사회로서 급변하는 정세를 배경으로 가진다. 이 시기의 변화는 학자들에게 일상과 관련한 개념들을 학문적으로 접근하게 하는 계기가 되어졌으며 예술가들에게는 총체성을 거부하는 다원주의 성향의 포스트모더니즘의 시대정신으로서 영향을 미쳤다. 같은 시기 현대 무용역시 포스트모던댄스로의 전환기를 맞이하게 되었다. 2차 세계대전 이후 현대무용은 그 한계점에 도달한 것으로 평가되기 시작했으며 이러한 상황에서 저드슨 댄스 씨어터를 비롯한 무용가들을 필두로 포스트모던댄스는 전개되었다. 저드슨 댄스의 설립자 중 한 명인 스티브 팩스톤은 머스 커닝햄의 무용수로 활동을 하며 움직임이 생성되는 과정과 계급적인 사회구조를 지닌 무용단의 생태에 문제의식을 가지게 되었다. 이러한 그의 사고는 일상적인 동작을 그대로 작품에 실현하는 시도로서 초기 작품 활동에 드러난다. 일상적인 동작의 활용이 포스트모던댄스의 공공연한 특징으로 간주되어지고 있음에도 이에 주목한 선행연구가 드물다는 점, 그리고 팩스톤 관련 연구들은 접촉즉흥에 관련한 것으로 편향되어 있다는 것에서 본 연구는 시작되었다. 때문에 접촉즉흥 기법에 치중하기 이전 일상적인 동작의 사용으로서 작품활동을 시작한 것에 주목하여 그 연결선상으로서 이후의 작품들을 살펴볼 것이다. 본 연구는 팩스톤의 작품인 ,,를 분석하고 이를 토대로 일상적 특성을 도출하였다. 일상에 관련한 개념을 고찰하고 포스트모던댄스의 무용사적 흐름을 파악하기 위하여 관련 저서와 학술 논문, 무용기사 및 평론을 참고하여 진행하였다. 팩스톤은 무용적 정제를 거치지 않은 일상에서의 동작을 작품에 그대로 차용하였으며 그 시작으로 보행동작은 비무용수인 공연자들의 보행으로서 일상적인 움직임에 미적 의의를 부여하였다. 팩스톤이 심취한 접촉즉흥의 움직임 역시 자연스러운 에너지의 흐름을 중시하는 것으로 일상적인 측면을 지니며 이후의 작품인 에서도 그는 이완된 신체로 평범한 동작들을 선보였다. 작품에 등장한 일상적 움직임의 특성은 반복되는 삶에서의 실천과 특별하지 않은 평범한 것이라는 기준으로서 분석되었다. 그의 작품에 내재된 일상적 움직임은 한 시대의 무용장르의 변화를 비롯하여 전통적으로 유지되어온 무용예술 작품에 관한 인식의 전환을 대변하는 것이다. 파격적인 시도와 실험성으로 점철된 그의 활동은 현대무용이 지녔던 한계점을 극복하기 위한 노력으로서 보다 높게 평가 되어져야 할 것이다.

• 지능정보연구
• /
• 제25권4호
• /
• pp.141-154
• /
• 2019

인터넷 기술과 소셜 미디어의 빠른 성장으로 인하여, 구조화되지 않은 문서 표현도 다양한 응용 프로그램에 사용할 수 있게 마이닝 기술이 발전되었다. 그 중 감성분석은 제품이나 서비스에 내재된 사용자의 감성을 탐지할 수 있는 분석방법이기 때문에 지난 몇 년 동안 많은 관심을 받아왔다. 감성분석에서는 주로 텍스트 데이터를 이용하여 사람들의 감성을 사전 정의된 긍정 및 부정의 범주를 할당하여 분석하며, 이때 사전 정의된 레이블을 이용하기 때문에 다양한 방향으로 연구가 진행되고 있다. 초기의 감성분석 연구에서는 쇼핑몰 상품의 리뷰 중심으로 진행되었지만, 최근에는 블로그, 뉴스기사, 날씨 예보, 영화 리뷰, SNS, 주식시장의 동향 등 다양한 분야에 적용되고 있다. 많은 선행연구들이 진행되어 왔으나 대부분 전통적인 단일 기계학습기법에 의존한 감성분류를 시도하였기에 분류 정확도 면에서 한계점이 있었다. 본 연구에서는 전통적인 기계학습기법 대신 대용량 데이터의 처리에 우수한 성능을 보이는 딥러닝 기법과 딥러닝 중 CNN과 LSTM의 조합모델을 이용하여 감성분석의 분류 정확도를 개선하고자 한다. 본 연구에서는 대표적인 영화 리뷰 데이터셋인 IMDB의 리뷰 데이터 셋을 이용하여, 감성분석의 극성분석을 긍정 및 부정으로 범주를 분류하고, 딥러닝과 제안하는 조합모델을 활용하여 극성분석의 예측 정확도를 개선하는 것을 목적으로 한다. 이 과정에서 여러 매개 변수가 존재하기 때문에 그 수치와 정밀도의 관계에 대해 고찰하여 최적의 조합을 찾아 정확도 등 감성분석의 성능 개선을 시도한다. 연구 결과, 딥러닝 기반의 분류 모형이 좋은 분류성과를 보였으며, 특히 본 연구에서 제안하는 CNN-LSTM 조합모델의 성과가 가장 우수한 것으로 나타났다.

• 한국전통조경학회지
• /
• 제38권3호
• /
• pp.25-34
• /
• 2020

본 연구는 국내 명승과 미국 국립공원을 대상으로 정의 및 주요 가치, 지정 절차 및 유형, 지정추이를 살펴보고 두 자연유산의 지정 특성을 분석한 결과 다음과 같은 결론을 도출하였다. 첫째, 명승은 경관성을 기본 전제로 학술적, 역사적, 인문적 가치를 포함하는 복합유산으로서의 성격을 지니고 있다. 미국 국립공원은 공공성을 기반으로 하는 자연유산으로서 경관의 보호를 통해 국민의 자연유산 향유에 기여하고 생태적·역사적 가치를 동시에 만족하는 것을 목표로 삼고 있다. 둘째, 명승의 지정은 소유자나 관리자, 지자체의 요청이나 문화재청장의 직권으로 지정신청과 지정조사를 거쳐 문화재 위원회의 심의를 통해 지정여부를 결정한다. 지정조사는 기초자원조사와 유형별 자원조사로 구분되며, 1970년 명주 청학동 소금강의 최초 명승 지정 이후 2000년대까지 명승 지정은 저조했으나 2006년 이후 명승 활성화 정책에 힘입어 지정건수가 급격히 증가했고, 자연명승과 역사문화명승의 비중이 균형을 이루게 되었다. 미국 국립공원은 의회나 대통령에 의해 지정이 결정되며 국립공원청에서는 사전검사조사를 통한 잠정자원의 특별자원연구 수행 여부 결정, 특별자원연구 결과에 따른 국립공원 지정기준 만족 여부, 우선순위 결정이 순차적으로 이루어진다. 미국 국립공원은 의회뿐만 아니라 대통령의 국립기념지 지정 권한 부여를 통해 국립공원의 지정경로가 확대되었고, 국립공원청의 통합 운영으로 여러 부처에서 관할하던 유산들이 국립공원에 포함되어 지정건수가 증가하였다. 또한 사적지법의 제정으로 역사유적이 다수 지정되고, 여가공간 제공을 위한 레크리에이션 지역들을 지정하여 총 18개 유닛으로 분류·관리하고 있다. 셋째, 명승과 미국 국립공원의 지정 특성을 비교한 결과 복합적 가치를 지닌 자연유산의 지정, 상호보완적 지정체계와 자원특성에 따른 유형분류, 주무부처 신설 및 지정 정책에 따른 유산의 균형화가 특징으로 확인되었다. 두 유산은 경관성과 공공성을 바탕으로 생태적, 역사적, 학술적 가치를 동시에 충족하는 복합적 자연유산의 특징을 지니고 있었다. 또한 양국 모두 기초자원조사와 심화단계의 지정조사를 통해 순차적, 상호보완적 조사로 유산의 지정을 심의하는 체계가 확인되었으며 자원의 특성에 따라 각 유형을 분류하였다. 이외에 국내 명승 활성화 정책과 미국의 국립공원청 통합운영은 두 유산의 지정 양상에 영향을 미쳤으며, 자연유산과 역사문화유산의 균형을 이루었다. 넷째, 명승과 국립공원의 자원유형과 보존관리 방식은 상당부분 연관성을 지니고 있었다. 미국 국립공원의 자연지역은 국내 천연기념물의 유형들이 주요 자원으로 포함되며, 자연명승과 유사한 특성을 지닌다. 또한 역사유적은 경관성 측면에서 역사문화명승의 지정기준과 유사하며, 전쟁 및 유명인물 관련 유적이 주를 이루는 양상이 사적의 유형과 관련있었다. 보존관리 측면에서 미국 국립공원의 자연지역은 생태계 원상을 그대로 두는 방식을 지니고 있으나 점적 자원에 대한 중점관리는 국내 자연유산 보호체계가 유용할 것으로 보인다. 한편, 역사자원은 사적과 역사문화명승이 전통시대 생활상 전반을 포함하고 있으나, 미국 국립공원의 역사유적은 전쟁사, 유명인 관련 유적을 대상으로 현대까지 시간적 범위를 설정하였으며, 현존 자원을 토대로 적극적인 향유 프로그램 제공이 차이점으로 도출되었다.

• 지능정보연구
• /
• 제19권1호
• /
• pp.79-94
• /
• 2013

최근 문화 예술 분야를 활용하여 고부가가치를 창출하며 지속적으로 발전하는 공연예술 시장 환경 속에서 공연 기획자들이나 투자자들은 공연에서 성공을 하기 위한 객관적인 지표를 원한다. 성공적인 공연을 위해서는 관람객들에게 편의를 제공하여 만족도를 높여 주어야 하며, 따라서 재미와 감동, 가치를 높이는 방안도 모색해야 한다. 기존의 만족도 확인 방법으로는 공연기간, 설문조사, 입소문 등 주관적인 평가가 대부분이다. 이것들은 관람객들의 만족도에 대한 평가 기준이 될 수 는 없다. 최근에는 공연에서 관람객의 몰입 정도가 공연의 주요 성공 요인으로 평가되기 시작했다. 공연에 대한 몰입도가 높으면 만족도도 높아진다는 연구 결과도 있다. 그래서 공연에 대한 관람객의 몰입을 실시간으로 확인하는 지표를 개발하는 것은 관람객들의 만족도를 평가하는데 유용하게 사용될 수 잇다. 기존의 몰입도 추출 연구는 대부분 1인을 대상으로 한 연구들이며 전체 관람객들의 몰입도는 개별 몰입도를 통합하여 측정하여 왔다. 하지만, 공연장에서 관람객들의 몰입도를 개별적으로 측정하기에는 경제적으로나 환경적으로 어려운 상황이다. 이러한 문제를 해결하기 위하여 본 연구에서는, 공연장의 전체 관람객 몰입도를 측정하기 위하여 차영상 기반의 동기화 기법을 활용하는 모형을 제시 한다. 이 기법은 우선 카메라를 통해 관람객 영상을 수집하고, 이를 차영상 기법을 이용하여 동일 장소, 시간 내 관람객들의 움직임 변화량을 측정하여 동기화 여부를 판단하는 것이다. 본 논문에서 동기화가 되었다는 의미는 관람객들이 몰입하고 있을 때, 자극원에 대하여 동시성을 가지고 반응하는 것을 말한다. 이것을 차영상 기법을 통하여 움직임의 변화량으로 환산하고, 이것을 이용하여 동적 동기화와 정적 동기화인지 구분한다. 그런 후 전체 관람객들의 움직임 변화량들을 비교하여 관람객들의 몰입도를 판단하는 모형을 구축하는 것이다. 이 연구에서는 전체 관객의 몰입도 판단 모형을 제시하고, 실제 관객의 반응 데이터를 이용한 평가를 하여 제시한 연구모형이 실제 공연장에서 그룹 관람객들의 몰입도를 측정할 수 있는 것을 확인할 수 있었다.

• 기록학연구
• /
• 제26호
• /
• pp.103-149
• /
• 2010

자치시대에 지방의 기록관리는 지역의 고유한 특성을 반영하여 독립적으로 추진할 필요가 있다. 그러나 아직 제대로 된 지방영구기록물관리기관이 한 곳도 설립되어 있지 않은 상황에서 다각적이고 적극적인 해결책을 모색할 필요가 있는데 지방기록관리의 방향을 '시설' 중심에서 '기록'과 '전문적 관리(사람)' 중심으로 바꾸는 것이 하나의 대안이다. 특히 중앙의 기록관리 프로세스라는 보편성에 매몰되었던 개별 지역의 다양성과 역동성을 찾기 위해서는 새로운 지역 기록화 전략을 적극 탐구할 필요가 있다. 도큐멘테이션 전략은 특정 지역, 주제, 사건 등에 관한 적절한 정보를 기록 생산자, 보존 기록관, 기록 이용자의 상호 협력을 통해 선별하여 수집하는 방법론으로서 80년대에 미국을 중심으로 제안되고 다양한 분야에서 다양한 방식으로 실험되어온바 있다. 이 연구에서는 도큐멘테이션 전략이 지역 기록화를 위한 방법론으로 어떤 의미를 갖는지 살펴보고 우리의 지역 환경에 적용하기 위해서 고려해야할 점과 추진 방향을 모색해보고자 하였다. 서구에서 개발된 도큐멘테이션 전략이 현 상황에서 우리에게 주는 시사점은 다음과 같다. 첫째, 아카이브즈 및 아키비스트의 능동적 역할을 추구하며 특히 지역사회에서 기록전문직의 가치를 인식시키는 데에 기여할 수 있다. 이 전략은 지방기록관리기관들은 행정사를 넘어서 지역사를 포괄적으로 기록화 하는 주체가 될 것을 촉구한다. 이에 따라 지방의 기록전문직들은 공공기록을 수동적으로 이관 받는 데에서 그치는 것이 아니라 능동적으로 지역의 기록을 수집하고 이를 서비스하기 위해 노력해야 한다. 둘째, 지역 내 기록 수집기관들의 협력을 통해 단일 조직의 기능 재현에서 폭넓은 사회적 재현을 성취할 수 있다는 점이다. 서구에서 이러한 협력 모델은 과도한 업무 부담으로 실패한 경우가 많았지만 디지털 환경은 새로운 가능성을 보여주고 있다. 지역 내에 존재하는 다양한 기록 생산 및 소장기관들과 협력을 통해 지역의 지식역량은 물론 지역정보서비스의 수준을 높일 수 있을 것이다. 셋째, 도큐멘테이션 전략은 다양한 집단들과의 연대를 추구한다. 이 전략은 도큐멘테이션 주제와 관련된 집단이나 공동체로부터 열정과 에너지, 전문지식을 가져올 수 있는 장점을 가지며, 도큐멘테이션 전략은 기억을 남기고자 하는 주체들이 실천적 기록문화운동을 추진하는 하나의 방법론을 제공할 수 있을 것이다. 이 연구에서는 우리의 지역 현실에 적합한 기록화 방향을 다음과 같이 제안하였다. 첫째, 선택적이고 집중적인 기록화를 지향한다. 지역에 관한 모든 영역에 관한 포괄적 기록화를 추진하기 보다는 지역의 로컬리티를 가장 잘 반영하는 영역과 대상을 선정하여 기록화를 추진한다. 지역을 구성하는 다양한 요소들인 사람, 사회 문화, 조직과 제도, 건조(建造) 환경, 공간 등이 상호작용하면서 만들어지고 변화하는 실체인 로컬리티를 규명하기 위해서는 전문가 집단과 지역민의 의견을 반영하는 구조가 필요하다. 둘째, 분산 보존과 통합적 재현을 지향한다. 기록화 주관기관은 다양한 기록 소장기관들과 소장자들을 연결하는 협력체계를 구축하여 분산 소장된 기록들을 통합적으로 검색할 수 있도록 한다. 즉, 한 지역의 역사 기록을 집중 보존할 기관을 정하기보다는 연계를 통한 기록화를 추진하는 것이 현실적일 것이다. 이를 위한 도구로서 지역 게이트웨이 구축을 제안하였다. 셋째, 열린 구조의 디지털 기록화를 지향한다. 지역 기록화는 맥락 재구성을 바탕으로 기록을 수집하는 방법론을 적용하게 되므로 선별된 기록에는 이미 수집자나 맥락 해석자의 의도가 반영되어 있다. 특히 맥락 분석에 의거하여 스토리를 구성하고 이에 따라 기록을 수집하거나 연계할 경우, 자의적이고 주관적인 선별이라는 비판을 받기 쉽다. 이러한 문제를 보완하기 위해 기록 맥락의 해석과 기록화 영역의 선정 등의 과정에 지역 내 다양한 집단의 의견이 반영될 수 있도록 해야 할 것이며, 디지털 네트워크를 통해 여러 집단 및 개인의 참여가 쉽게 이루어질 수 있도록 보장해야 한다. 넷째, 지역 내 협력기관들의 영역별 기록화 수준을 정한다. 기록화에 참여하는 기관들이 디지털 기록화에 맞는 역할을 분담 받아야 하고, 각 기관은 협력적 기록화에 참여함으로써 자관 이용자들에게는 더 나은 포괄적인 기록 서비스를 제공할 수 있을 것이다. 이를 위해 도서관의 디지털 장서개발에 활용하는 컨스펙터스 모형을 응용하여 디지털 기록화 방법론을 새롭게 설계할 것을 제안하였다.

• Asia Marketing Journal
• /
• 제12권2호
• /
• pp.27-52
• /
• 2010

그동안 기업의 사회적 책임활동에 대한 척도개발이 국·내외적으로 일부 연구자들에서 수행되어져 왔지만, 기업의 사회적 책임활동을 측정하고 있는 구성개념(측정항목)들에 대한 이론적 배경의 결핍과 기업의 네 가지 사회적 책임활동 차원이 과연 서로 이질적인 차원인지에 대한 의문이 제기되었다. 또한, 기업의 사회적 책임활동과 관련된 지난 30년간 발표된 정량적 분석에 의하면, 대부분의 연구들이 측정항목과 방법론 측면에서 많은 문제점을 보이고 있다. 이처럼 기업의 사회적 책임활동 (CSR)에 대한 학문적 관심은 오래 지속되고 있지만, 기업의 사회적 책임차원 (경제적, 법률적, 윤리적, 자선적 책임)에 대하여 소비자들이 어떻게 바라보는지, 혹은 어떻게 인지하는지에 대해 측정할 수 있는 척도가 미흡한 실정이다. 특히 기업의 사회적 책임활동에 대한 척도가 서구사회 위주로 개발되어 국내에서 인용되다보니, 국내 특성에 맞는 기업의 사회적 책임활동을 측정할 수 있는 척도가 미흡하였다. 이에 본 연구는 다양한 이해관계들을 대상을 집단면접(FGI)을 실시하여 국내 상황에 맞는 척도를 개발하였고, 본 연구에서 개발된 새로운 척도가 기존 척도에 비하여 더 높은 예측력을 지니는지를 간접적으로 증명하였다. 본 연구결과를 통해 새롭게 개발된 기업의 사회적 책임활동에 대한 척도는 다음과 같다. 우선, 경제적 책임은 '제품의 품질개선 노력', '고객의 불평처리에 대한 체계구축', '이윤창출을 통한 국가 경제발전 이바지', '고용창출 노력', 법률적 책임으로는 '법적기준 준수', '직원들의 복지추구와 고용 관련법 준수', '명시된 계약적 책임이행', '기업경영 관련법 준수', '소비자보호법 준수', 윤리적 책임으로는 '윤리강령 지침마련', '과장광고나 허위광고', '투명경영', '사업파트너와의 공정한 거래', 자선적 책임으로는 '지역사회와의 협력사업', '스포츠 및 문화활동 지원', '지역사회 봉사', '사회환원' 등이다. 연구결과는 국내 기업들에게 경제적 책임활동의 중요성을 다시 한 번 인지시키고 있으며, 특히 국내 기업들에게 자사의 사회적 책임활동을 진단하는데 중요한 실무적인 시사점을 제시할 것이다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.