• Asian Pacific Journal of Cancer Prevention
• /
• 제15권21호
• /
• pp.9153-9157
• /
• 2014

Background: Capparis spinosa L., a Uygur medicine, had been shown to have anti-tumor activity in our early experiments with an N-butanol extract (CSBE) as its active fraction. However, the mechanisms responsible for its effects are not clearly understood. Here, we report that treatment of SGC-7901 cells with CSBE resulted in dose-dependent reduction of cell viability and induction of apoptosis. Materials and Methods: To observe the inhibitory and killing effects of CSBE on SGC-7901, the SRB method was adopted, apoptosis being observed by electron microscopy. To clarify the mechanisms of apoptosis, Western blot and enzyme-labeled methods were used to examine the release of cytochrome c (Cyt c) and the activation of the caspase cascade. Results: By electron microscopy, apoptotic morphologic changes were detectable after CSBE administration. In this study, it was also demonstrated that CSBE induced apoptosis in SGC-7901 cells by inhibiting mPTP open, mitochondrial cytochrome c release, caspase-9 and caspase-3 activation. Conclusions: The findings indicated that CSBE induces aap optosis through mitochondrial pathway.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2465-2470
• /
• 2014

The rate constants of solvolysis of phenyl N-phenyl phosphoramidochloridate (PhNHPO(Cl)OPh, Target Compound-TC1) have been determined by a conductivity method. The solvolysis rate constants of TC1 are well correlated with the extended Grunwald-Winstein equation, using the $N_T$ solvent nucleophilicity scale and YCl solvent ionizing scale, and sensitivity values of $0.85{\pm}0.14$ and $0.53{\pm}0.04$ for l and m, respectively. These l and m values were similar to those obtained previously for the complex chemical substances dimethyl thiophosphorochloridate; N,N,N',N'-tetramethyldiamidophosphorochloridate; 2-phenyl-2-ketoethyl tosylate; diphenyl thiophosphinyl chloride; and 9-fluorenyl chloroformate. As with the five previously studied solvolyses, an $S_N2$ pathway is proposed for the solvolyses of TC1. For four representative solvents, the rate constants were measured at several temperatures, and activation parameters (${\Delta}H^{\neq}$ and ${\Delta}S^{\neq}$) were estimated. These activation parameters are also in line with the values expected for an $S_N2$ reaction.

• Archives of Pharmacal Research
• /
• 제25권3호
• /
• pp.370-374
• /
• 2002

Administration of dopamine agonist, apomorphine (2 mg/kg, s.c.), produces cage climbing behavior in mice that exhibit typical dopaminergic stimulation. The present study investigated the pCREB expression level in several brain regions following apomorphine treatment in order to determine whether the increased the dopaminergic activation produced by apomorphine accompanies the changes in pCREB immunoreactivity. A mouse brain was removed at 0min, 10 min, 30 min, 1 h, 2 h, 7 h, and 24 h after apomorphine treatment. The brain tissue was fixed by an intracardiac perfusion with ice-cold 4％ paraformaldehyde in PBS. Immunohistochemical study was conducted using the ABC-DAB method. The data showed that the immunoreactivity of pCREB increased in the striatum, nucleus-accumbens, piriform cortex and the dentate gyrus of the hippocampus of a mouse brain 30 min after the apomorphine treatment. Increased immunoreactivity began to diminish 2 h after the apomorphine treatment in all the brain regions measured. The time course for the pCREB immunoreactivity was similar to the behavioral response induced by the apomorphine treatment. These results suggest that activation of the dopamine receptor is accompanied by an increase in pCREB expression in the mouse brain.

• 대한의생명과학회지
• /
• 제18권4호
• /
• pp.428-434
• /
• 2012

Epilepsy is a chronic neurological disease showing a symptom of repeated seizures without any other physical disorders. Among the diagnostic examination for epilepsy, the electroencephalogram (EEG) has been known as an important test. This study aimed to investigate the EEG with photic stimulation in the pediatric epilepsy patients. They underwent digital sleep and waking EEGs or waking EEGs with photic stimulation. Epilepsy type, seizure history, and season of occurring seizure were analyzed. Epilepsy patients showed more response during the period of photic-on and eye close at the frequency of 10~20 Hz during the EEG activation procedure. Photoparoxysmal response (PPR) was shown in 206 patients out of total 1,551 epilepsy patients. PPR was appeared more frequently during summer and winter seasons, and especially in the patients who had a history of seizure. During the PPR, EEG pattern showed spike (77.18%), theta (9.71%), and spike + theta (13.11%). On the other hand, beta and theta waves were not significantly changed by photic stimulation. However, alpha wave was decreased and delta wave was increased by photic stimulation (P<0.05). These changes may be due to temporarily altered electrophysiological function of the epileptic patient's brain by the photic stimulation. There was no difference in the EEG pattern between the left and right side in the brain. In conclusion, condition of photic-on with closed eyes and frequency of 10~20 Hz during the procedure of EEG activation could be appropriate for obtaining a definite photoparoxysmal response in the electroencephalogram of the pediatric epilepsy patients.

• 한국재료학회지
• /
• 제15권6호
• /
• pp.388-392
• /
• 2005

The $Zr_{57}V_{36}M_7$ getter alloy was prepared by Fe substituting Ga or Y for Fe on $Zr_{57}V_{36}M_7$ getter alloy(St707), and the activation temperatures and the hydrogen a sorption speeds of these alloys were investigated. The activation temperatures of these alloys were estimated from the ultimate pressure-temperature curve and lowered about $100\~200\;K$ compared to $Zr_{57}V_{36}M_7$, fetter alloy(St707). However, final pressures at fully activated temperature were increased with substitution of Fe by Ga and Y on $Zr_{57}V_{36}M_7$ getter alloy. The hydrogen sorption speeds of these alloys measured by an orifice method were decreased about $0.460\~0.586liter/sec$ g compared to $Zr_{57}V_{36}M_7$ getter alloy.

• 한국표면공학회지
• /
• 제41권6호
• /
• pp.301-307
• /
• 2008

In this paper, nanocrystallization of CuNiTiZr bulk metallic glass (BMG) subjecting to a kinetic spraying, dependent on impact velocity, was investigated by numerical and experimental approaches. The crystallization fraction and nucleation activation energy of initial feedstock and as-deposited coating were estimated by DSC and Kissinger method, respectively. The results of numerical modeling and experiment showed that the crystalline fraction and nucleation activation energy in BMG coatings were depended on kinetic energy of incident particle. Upon impact, the conversion of particle kinetic energy leads to not only decreasing free energy barrier but also increasing the driving force for an amorphous to crystalline phase transformation. The nanocrystallization of BMGs is associated with the strain energy delivered by a plastic deformation with a high strain rate.

• 한국표면공학회지
• /
• 제44권6호
• /
• pp.277-283
• /
• 2011

In this study, the cavitation test and electrochemical experiments were conducted for ALBC3(Cu-Al) alloy that has an excellent corrosion resistance and cavitation characteristic in sea water. Based on the ASTMG32 regulation, the cavitation test was performed with the cavitation and cavitation erosion tester using piezoelectric effect. The electrochemical characteristics are evaluated with potentiostatic experiments in activation polarization potential range. As a result, cavitation damage is increased proportionally to temperature and time at $30{\mu}m$ amplitude. It is appeared that acceleration period in weight loss presented over 6 hours under the cavitation environment in sea water. In addition, corrosion damages were observed at the potential range of -3.2~-1.4 V as the result of potensiostatic experiments during 12 hours in activation polarization potential range.

• 대한화학회지
• /
• 제33권6호
• /
• pp.582-587
• /
• 1989

$[Cr(NH_3)_5(DMF)]^{3+}$ 이온의 수화반응 속도를 분광광도법을 이용하여 온도와 압력을 변화시켜 가면서 측정하였다. 활성화부피(${{\Delta}V_0}^{\neq}$)는 -2.76∼-3.65$cm^3mol^{-1}$의 범위로 작은 음의 값을 나타내었다. 활성화 엔트로피(${\Delta}S^{\neq}$) 및 활성화 압축률계수(${\Delta}{\beta}^\neq$)도 모두 작은 음의 값을 가졌다. 이러한 열역학적인 활성화 파라미터로부터 이 착이온의 수화반응은 교환회합($I_a$) 메카니즘으로 진행됨을 알 수 있었다.

• 한국염색가공학회지
• /
• 제22권1호
• /
• pp.77-82
• /
• 2010

Highly conductive yarn was successfully obtained using electroless nickel plating method with palladium activation. In the presence of palladium seed on surface of fibers as a catalyst, continuos nickel layer produced on surface of fibers by reducing $Ni${2+}$ ion in the electroless plating bath to $Ni^0$. It was found that the Pd-activation using $SnCl_2$ and $PdCl_2$ to deposit palladium seeds on the surface of fibers plays a key role in the subsequent electroless plating of nickel. It also found that electroless nickel plating on the fibers can induce the nickel-plated $ELEX^{(R)}$ fibers to improve the electrical conductivity of the fibers. The thickness of nickel coating layer on the Pd-activated $ELEX^{(R)}$ fibers and specific conductivity of the fiber were increased through electroless plating time. The temperature of nickel plating bath was very effective to enhance the nickel deposition rate.

• 소성∙가공
• /
• 제17권8호
• /
• pp.558-563
• /
• 2008

The initial strain, the applied stress exponent, the activation energy, and rupture time in AZ31 magnesium alloy have been measured in order to predict the deformation mechanism and rupture life of creep over the temperature range of 423-443K. Creep tests were carried out under constant applied stress and temperature, and the lever type tester and automatic temperature controller was used for it, respectively. The experimental results showed that the applied stress exponent was about 9.74, and the activation energy for creep, 113.6KJ/mol was less than that of the self diffusion of Mg alloy including aluminum. From the results, the mechanism for creep deformation seems to be controlled by cross slip at the temperature range of 423-443K. Also the higher the applied stress and temperature, the higher the initial strain. And the rupture time for creep decreased as quadratic function with increasing the initial strain in double logarithmic axis.