• Journal of the Society of Cosmetic Scientists of Korea
• /
• 제25권4호
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and E and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then the on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to form a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5:1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin's moisture. Vitamins A and E contribute to preventing skin aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer. The crystalline structures of gel were surface-chemically-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC. Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Daegeon and Pusan in Korea and Hokkaido, Osaka and Miyazaki in Japan with correlation to the climate.

• Applied Chemistry for Engineering
• /
• 제10권4호
• /
• pp.548-556
• /
• 1999

The thermal degradation of polyethylene has been studied using a nonisothermal thermogravimetric technique under a nitrogen atmosphere condition at several heating rates from 10 to $50^{\circ}C/min$. To obtain information on the kinetic parameters, the dynamic thermogravimetric analysis curve and its derivative have been analyzed by a variety of analytical methods such as Kissinger, Freeman-Carroll, Flynn-Wall, Coats-Redfern, Chatterjee-Conrad, Friedman, Horowitz-Metzger, Ozawa and Denq methods. The comparative works for the kinetic results obtained from various methods should be performed to determine the kinetic parameters, because three are tremendous differences in the calculated kinetic parameters depending upon the mathematical method taken in the analysis. From this work, it was found that the apparent activation energy of HDPE was larger than those of LDPE and LLDPE.

• The Journal of Korean Physical Therapy
• /
• 제21권3호
• /
• pp.17-24
• /
• 2009

Purpose: The purpose of this study was to investigate the effects of a combination of isotonic (CI) technique on the balance, muscle fatigue and muscle activities of the quadriceps muscle in the paretic leg of hemiplegic patients. Method: All the subjects received a combined isotonic technique of proprioceptive neuromuscular facilitation (PNF) for about 30 minutes 3 times per week for 6 weeks. The root mean square (RMS) and mid frequency (MF) were recorded by surface electromyography (EMG)(EMG/EP system, OXFORD Medelec, UK) during maximal voluntary isometric contractions (MVIC). The balance ability was measured by a balance system (BIODEX, USA). Result: The RMS of the quadriceps muscle at post-treatment was significantly increased compared to that at pretreatment (p<0.05). Yet there was no significant difference among the three muscles. There were no significant difference in the MF of the vastus lateralis and rectus femoris between pre- and post-treatment, but the MF of the vastus medialis was significantly decreased (p<0.05). There was a significant difference in the vastus medialis and lateralis between pre- and post-treatment (p<0.05). Moreover, the overall stability index at post-treatment was significantly decreased compared to that at pre-treatment (p<0.05). But there was no significant difference between the anterior/posterior and medial/lateral stability indexes. Conclusion: The results of this study indicated that a CI technique of PNF had an effect to improve the balance and muscle activity in hemiplegic patients.

• The Journal of Internal Korean Medicine
• /
• 제29권3호
• /
• pp.778-786
• /
• 2008

Objectives : This study was to investigate the short time effect of caffeine on heart rate variability(HRV) and the effect of Neiguan(PC6) acupuncture stimulation on HRV. Methods : 27 healthy adult volunteers were randomly allocated to two groups: Neiguan group (N=13) or placebo group (N=14). The study was carried out under a randomized double-blinded placebo-controlled trial method. Each group orally received the same tablets with 200 mg caffeine. After 1 hour, acupuncture was applied to the Neiguan(PC6) points for the Neiguan group, and for the placebo group was applied to a non-acupuncture point. Both groups were estimated with HRV 3 times, before and after caffeine ingestion, 20 minutes after acupuncture stimulation. Results : After taking caffeine, pulse rate, mean-HRV, and pNN50(the proportion derived by dividing NN50 by the total number of NN intervals) decreased, SDNN(standard deviation of all normal-to-normal (NN) intervals), RMSSD (the root square of successive differences), TP log, HF(high frequency), and HRV index was increased. There were significant changes to the autonomic nervous system after taking caffeine. There were no significant differences between the two groups after acupuncture at Neiguan. Conclusion : Caffeine could induce general activation of the autonomic nervous system. Neiguan acupuncture stimulation may not have significant influence on the autonomic nervous system.

• The Journal of Internal Korean Medicine
• /
• 제38권3호
• /
• pp.336-352
• /
• 2017

Objective: This study investigated the perception, utilization, and satisfaction (in the general population), of the common cold treatment at the Korean Medical Clinic, to provide basic information for the development of Korean medicine clinical practice guidelines for the common cold. Method: A questionnaire was developed that consisted of questions about the general perception, utilization status, degree of satisfaction, willingness to use, and the improvement of the common cold treatment at the Korean Medical Clinic. An online survey was conducted using this questionnaire. Results: Three-hundred subjects responded to the survey. The results of the analysis were as follows. 1. 73.7% of the subjects recognized the common cold treatment at the Korean Medical Clinic. 2. 72% of the subjects had a positive perception of Korean medicine for common cold treatment. The major reason for the positive perception was the expectation about improving immunity and preventing recurrence. 3. Only 20% of the subjects had visited the Korean Medical Clinic for common cold treatment. The expensive cost was the major reason for not visiting the Korean Medical Clinic for common cold treatment. 4. The ratio of subjects who were willing to visit the Korean Medical Clinic for common cold treatment was 70%. 5. The expansion of health insurance coverage (67.7%), the activation of public relations (54.7%), and the development of a new herb medicine preparation that was easy to take (43.3%) were found to be necessary for improving the Korean medical service for common cold treatment. Conclusion: In spite of high recognition and positive perception, actual utilization of common cold treatment at the Korean Medical Clinic was relatively low. Multifaceted efforts are necessary to enhance the competitiveness of Korean medical service for treatment of the common cold.

• Korean Journal of Applied Biomechanics
• /
• 제27권2호
• /
• pp.83-90
• /
• 2017

Objective: To investigate the effect of short-term vibration frequencies on muscle force generation capabilities. Method: Six healthy participants were recruited for this study and only their dominant leg was tested. The subjects were tested under five conditions of vibration frequencies with constant amplitude: 0 Hz (no vibration), 30 Hz, 60 Hz, and 90 Hz, and the vibration amplitude was 10 mm for all frequency conditions. The vibration was applied to the rectus femoris (RF). The subjects were then instructed to maintain a steady-state isometric knee joint torque (100 Nm) for the first 6 s. After the steady-state torque production, the subjects were required to produce isometric knee joint torque by leg extension as hard as possible with a start signal within the next 3 s. The vibration was applied for ~4 s starting from 1 s before initiation of the change in the steady-state knee joint torque. Results: The results showed that the maximum voluntary torque (MVT) of the knee joint increased with the vibration frequencies. On average, the MVTs were 756.47 Nm for 0 Hz (no vibration) and 809.61 Nm for 90 Hz. There was a significant positive correlation (r = 0.71) between the MVTs and integrated electromyograms (iEMGs). Further, the co-contraction indices (CCIs) were computed, which represent the ratio of the iEMGs of the antagonist muscle to the iEMGs of all involved muscles. There was a significant negative correlation (r = 0.62) between the CCIs and MVTs, which was accompanied by a significant positive correlation (r = 0.69) between the iEMGs of the vibrated muscle (RF). There was no significant correlation between the MVTs and iEMGs of the antagonist muscle. Conclusion: The results of this study suggest that the short-term vibration on the muscle increases the level of muscle activation possibly owing to the increased Ia afferent activities, which enhances the muscle force generation capability.

• Journal of the Korean Ceramic Society
• /
• 제22권3호
• /
• pp.35-40
• /
• 1985

The composition of the base glass was determined to be $Na_2O$ 15, $Fe_2O_3$ 35, $B_2O_3$ 0~20, $P_2O_5$ 30~50 by mole percent. The heating temperature for nucleation was determined by means of thermal expansion curve. Crystalline phases were investigated by X-ray diffraction method and I.R Spectra. Electrical conductivities of glass spec-imens were observed in the temperature range 25~20$0^{\circ}C$ The activation energies of these specimens were caculated. The results obtained were as follows : 1) The limit composition of the melts 15mol% $Na_2O$ 35mole% $Fe_2O_5$ 20mole% $B_2O_3$ 30mole% $P_2O_5$ was able to be formed into desired shapes during cooling, . 2) In the measurement of d. c conductivity($\delta$) on the glasses in the system $15Na_2O-35Fe_2O_3$-$B_2O_3$-(50-x) $P_2O_5$ the values decreased by replacing 5 mole% $P_2O_5$ with $B_2O_3$ 3) The d. c conducties of heat treated samples were increased by replacing $P_2O_5$ with $B_2O_3$ 4) $B_2O_3$ contributed to precipitate crystals such as${\gamma}$-$Fe_2O_3$ $Fe_3O_4$ which had the advantage of electronic conduction in heat treated samples. 5) The slope plotted Log($\delta$) versus 1/T in this glass system was linear in the measured temperature range.

• Journal of the Korean Ceramic Society
• /
• 제22권3호
• /
• pp.53-59
• /
• 1985

Nucleation and crystallization of $\beta$-eucryptite in a glass of molecular percentage composition Li2O.Al2O3.2SiO2 are studied. The glasses are made by quenching of the melts from 143$0^{\circ}C$ to room temperature. Heat-treatment for nucleation and crystal growth are caried out at various temperature in the range between 50$0^{\circ}C$ and 80$0^{\circ}C$ with different duration of time. The amounts of crystallization are estimated by the method of x-ray powder diffraction. As the results a time-temperature-transformation relation for crystallization is derived. The maximum rate of crystallization is observed at about 75$0^{\circ}C$ from the T-T-T-curve while the crystallization temperature is detected at 67$0^{\circ}C$ by DTA measurement. The crystallization temperature moved to 62$0^{\circ}C$ by adding 5 weight percents of TiO2 and it moved to 78$0^{\circ}C$ by adding 2 weight percents of V2O5. The crystallization temperature moved to 62$0^{\circ}C$ by adding 5 weight percent of TiO2 it moved to 78$0^{\circ}C$ by adding 2 weight percents of V2O5 The activation energy for crystallization from the pure glass is calculated as 68 Kcal/mol and it varied to 53 Kcal/mol and 110Kcal/mol when 5 weight percents of TiO2 and weight percents of V2O5 are added respectively.

• Transactions of the Korean hydrogen and new energy society
• /
• 제22권4호
• /
• pp.534-545
• /
• 2011

This paper describes the evaluation of kinetic parameters for pyrolysis and carbon char oxidation of residual oil. The non-isothermal pyrolysis of residual oil was carried out with TGA (Thermo-Gravimetric Analyzer) at heating rate of 2, 5, 10 and $20^{\circ}C/min$ up to $800^{\circ}C$ under N2 atmosphere. The first order and nth order pyrolysis models were used to fit the experimental data, and the nth order model was turned out to follow the experimental data more precisely than the first order model. For carbon char oxidation experiment, TGA and four heating rates used in pyrolysis experiment were also adapted. The kinetic parameters for the residual carbon char particle were obtained with three char oxidation model, that is, volume reaction, grain and random pore model. Among them, the random pore model described the char oxidation behaviour quite well, compared to other two models. The non-linear regression method was used to obtain kinetic parameters for both pyrolysis and carbon char oxidation of residual oil.

• Transactions of the Korean hydrogen and new energy society
• /
• 제28권3호
• /
• pp.238-245
• /
• 2017

Mg-Ni nanoparticles were synthesized by a physical vapor condensation method (DC arc-discharge) in a mixture of argon and hydrogen atmosphere, using compressed mixture of micro powders as the raw materials. The crystal phases, morphology, and microstructures of nanoparticles were analyzed by means of X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM). It was found that the intermetallic compounds of $Mg_2Ni$ and $Mg_2Ni$ formed with existence of phases of Mg, Ni, and MgO in Mg-Ni nanoparticles. After one cycle of hydrogen absorption/desorption process (activation treatment), Mg-Ni nanoparticles exhibited excellent hydrogen absorption properties. $Mg_2Ni$ phase became the main phase by aphase transformation during the hydrogen treatments. The phenomenon of refinement of grain size in the nanoparticle was also observed after the hydrogen absorption/desorption processes, which was attributed to the effect of volume expansion/shrinkage and subsequent break of nanoparticles. Maximum hydrogen absorption contents are 1.75, 2.21 and 2.77 wt.% at 523, 573 and 623 K, respectively.