• 제목/요약/키워드: Activation method

검색결과 2,323건 처리시간 0.026초

물리적 인간 기계 상호작용을 위한 근육의 기하학적 형상 변화를 이용한 상지부 움직임 예측 (Prediction of the Upper Limb Motion Based on a Geometrical Muscle Changes for Physical Human Machine Interaction)

  • 한효녕;김정
    • 제어로봇시스템학회논문지
    • /
    • 제16권10호
    • /
    • pp.927-932
    • /
    • 2010
  • Estimation methods of motion intention from bio-signal present challenges in man machine interaction(MMI) to offer user's command to machine without control of any devices. Measurements of meaningful bio-signals that contain the motion intention and motion estimation methods from bio-signal are important issues for accurate and safe interaction. This paper proposes a novel motion estimation sensor based on a geometrical muscle changes, and a motion estimation method using the sensor. For estimation of the motion, we measure the circumference change of the muscle which is proportional to muscle activation level using a flexible piezoelectric cable (pMAS, piezo muscle activation sensor), designed in band type. The pMAS measures variations of the cable band that originate from circumference changes of muscle bundles. Moreover, we estimate the elbow motion by applying the sensor to upper limb with least square method. The proposed sensor and prediction method are simple to use so that they can be used to motion prediction device and methods in rehabilitation and sports fields.

Measurements of proton beam flux and energy of APEP using foil activation technique

  • Wenlin Li;Qifan Dong;Hantao Jing;Li Ou;Zhixin Tan;Sixuan Zhuang;Qingbiao Wu
    • Nuclear Engineering and Technology
    • /
    • 제56권1호
    • /
    • pp.328-334
    • /
    • 2024
  • The activation method of metallic foils is an important technique to measure the flux and energy of proton beams. In this paper, the method was used to measure the CSNS APEP proton flux at seven nominal proton energies ranging from 10 MeV to 70 MeV for beam spot sizes of the 20 mm × 20 mm and 50 mm × 50 mm. The reactions of natTi(p, x)48V, natNi(p, x)57Ni, natCu(p, x)58Co, and 27Al(p, x)24Na were employed to measure the proton beam flux with a range of 107-109 p/cm2/s. Furthermore, we also proposed a method using the activity ratio with a stacked-foil target to determine the energy spread of a Gaussian-like distribution for different nominal proton energies. The optimal combinations of Al, Cu, Ti, Ni, Mo, Fe, Nb, and In foils were adopted for the proton energies. The measured energy spreads for degraded beams of 30 MeV-70 MeV were found to be smaller than 10.00%.

The Effect of Modified Swing Method on the Muscle Activation Patterns of Upper Limb in Wheelchair Badminton Players

  • You Joo SHIN;Duk Chan JANG;Sangbum PARK
    • Journal of Sport and Applied Science
    • /
    • 제7권2호
    • /
    • pp.1-12
    • /
    • 2023
  • Purpose: The purpose of this study was to investigate the possibility of modified swing to prevent shoulder injury by analyzing differences in the muscle activation patterns of upper limb by the swing method in wheelchair badminton players. Research design, data, and methodology: 10 wheelchair badminton players participated in the experiment as subjects and performed 10 high clears and 10 smashes in both traditional and modified swing methods toward a shuttlecock hung at the height of racket impact point. For each trial, activation patterns of biceps brachii, triceps brachii, anterior deltoid, and posterior deltoid were measured from the upper limb participating in the swing from which the duration, peak, and root mean square (RMS) of electromyography (EMG) activities from swing initiation to shuttle impact were calculated. The maximum swing velocity of the smash and the distance of the high clear were also measured with both methods to compare differences in the swing velocity and shuttle hit distance. Results: Differences in the EMG peak and RMS of the anterior deltoid by swing methods were shown to differ by the skill type, being higher in the traditional swing method than the modified during only the high clear. The EMG peak and RMS, and the duration of the posterior deltoid were higher and longer with the traditional swing method than the modified during both the smash and high clear. The intensities of the biceps brachii and triceps brachii activities measured during the smash and high clear were higher in the traditional swing method than the modified, and the biceps brachii and triceps activity durations during the high clear were shorter in the modified swing method than the traditional. The maximum swing velocity of the smash was faster with the traditional swing method than the modified, while the distance of the high clear did not differ significantly. Conclusions: These results suggest that the modified swing can be an effective performance method for preventing shoulder injuries without undue loss of impact power in wheelchair badminton players by reducing excessive loads imposed on the shoulder and allowing the optimal use of the elbow extension.

가열속도법에 의한 반응속도론 연구 (Kinetic Study by Heating Rate Method)

  • 박영수;양광규;김용태
    • 한국연초학회지
    • /
    • 제4권2호
    • /
    • pp.57-61
    • /
    • 1982
  • For evaluating kinetic parameters of various reactions and materials a straight- forward method has been studied by the variable heating rate method in DSC analysis. Based on the linear relationship between the logarithm of the heating rate and reciprocal Peak temperature, this method allows calculation of activation energy and the Arrhenius frequency factor by only one observation of the peak temperature versus the heating rate. According to tile D function, D=-In P(x)/dx, to x(=$\frac{E}{RT}$) we can calculate reasonably accurate activation energy, tile Arrhenius factor and the rate constant, and predict half-life times of various materials from the kinetic calculation.

  • PDF

Back-Propagation방법의 수렴속도 및 학습정확도의 개선 (Acceleration the Convergence and Improving the Learning Accuracy of the Back-Propagation Method)

  • 이윤섭;우광방
    • 대한전기학회논문지
    • /
    • 제39권8호
    • /
    • pp.856-867
    • /
    • 1990
  • In this paper, the convergence and the learning accuracy of the back-propagation (BP) method in neural network are investigated by 1) analyzing the reason for decelerating the convergence of BP method and examining the rapid deceleration of the convergence when the learning is executed on the part of sigmoid activation function with the very small first derivative and 2) proposing the modified logistic activation function by defining, the convergence factor based on the analysis. Learning on the output patterns of binary as well as analog forms are tested by the proposed method. In binary output patter, the test results show that the convergence is accelerated and the learning accuracy is improved, and the weights and thresholds are converged so that the stability of neural network can be enhanced. In analog output patter, the results show that with extensive initial transient phenomena the learning error is decreased according to the convergence factor, subsequently the learning accuracy is enhanced.

  • PDF

열경화성 액정 에폭시 수지의 열분해 활성화에너지 (Thermal Decomposition Energy of Liquid Crystalline Epoxy)

  • 조승현
    • Composites Research
    • /
    • 제37권1호
    • /
    • pp.1-6
    • /
    • 2024
  • 합성한 Diglycidyl ether of 4,4'-dihydroxy-α-methylstilbene (DGE-DHMS)에 1-Methyl Imidazole을 2:1의 비율로 첨가하여 새로운 액정 에폭시 올리고머인 DDA를 합성하여 열안정성을 평가하였다. TGA분석을 통해 얻어진 결과로 볼 때 액정상과 isotropic상에서 열안정성의 차이는 관찰되지 않았고, Flynn-Wall-Ozawa method와 Kissinger method를 이용하여 계산한 열분해 활성화 에너지값의 비교 결과 열분해가 진행되는 동안 일정한 메커니즘이 작용함을 확인할 수 있었다.

DAEM 분석 방법을 통한 국내 수입탄의 탈휘발화 반응특성 비교연구 (Application of a DAEM Method for a Comparison of Devolatilization Kinetics of Imported Coals)

  • 김량균;송주헌;이병화;장영준;전충환
    • Korean Chemical Engineering Research
    • /
    • 제48권1호
    • /
    • pp.110-115
    • /
    • 2010
  • 본 연구 목적은 두가지 종류의 국내 수입탄에 대한 열분해 반응율을 구하고 이를 비교하는 것이다. 이를 위해 TGA를 통하여 열분해 실험을 수행하였으며, 반응상수 분석은 New DAEM 방법을 이용하였다. 서로 다른 가열속도에서 각각 얻어진 TGA 질량변화 곡선으로부터, 활성화 에너지의 분포함수를 구한 후 최고빈도를 나타내는 활성화 에너지를 평균 활성화 에너지로 결정하였다. 그 결과 석탄의 종류에 따라 상기 반응에 대한 반응속도상수가 확실한 차이를 보였다. 이 같은 New DAEM 분석기법을 통해 얻은 반응상수를 적용시킨 CPD 모델을 가지고 예측한 결과가 TGA 실험치와 비교할 때보다 더 잘 일치함도 확인할 수 있었다.

동결 보호제(DMSO) 농도에 따른 돼지 중간엽 줄기세포의 Caspase 3과 7 발현 (Activation of Caspase-3 and -7 on Porcine Bone Marrow Derived Mesenchymal Stem Cells (pBM-MSCs) Cryopreserved with Dimethyl Sulfoxide (DMSO))

  • 옥선아;노규진
    • 한국수정란이식학회지
    • /
    • 제27권3호
    • /
    • pp.183-187
    • /
    • 2012
  • Adult stem cell transplantation has been increased every year, because of the lack of organ donors for regenerative medicine. Therefore, development of reliable and safety cryopreservation and bio-baking method for stem cell therapy is urgently needed. The present study investigated safety of dimethyl sulfoxide (DMSO) such as common cryoprotectant on porcine bone marrow derived mesenchymal stem cells (pBM-MSCs) by evaluating the activation of Caspase-3 and -7, apoptosis related important signal pathway. pBM-MSCs used for the present study were isolated density gradient method by Ficoll-Paque Plus and cultured in A-DMEM supplemented 10% FBS at $38.5^{\circ}C$ in 5% $CO_2$ incubator. pBM-MSCs were cryopreserved in A-DMEM supplemented either with 5%, 10% or 20% DMSO by cooling rate at $-1^{\circ}C$/min in a Kryo 360 (planner 300, Middlesex, UK) and kept into $LN_2$. Survival rate of cells after thawing did not differ between 5% and 10% DMSO but was lowest in 20% DMSO by 0.4% trypan blue exclusion. Activation of Caspase-3 and -7 by Vybrant FAM Caspase-3 and -7 Assay Assay Kit (Molecular probes, Inc.OR, USA) was analyzed with a flow cytometer. Both of cryopreserved and control groups (fresh pBM-MSCs) were observed after the activation of Caspase-3 and -7. The activation did not differ between 5% and 10% DMSO, but was observed highest in 20% DMSO. Therefore 5% DMSO can be possibly used for cell cryopreservation instead of 10% DMSO.

기상활성화 표면처리된 다중벽 탄소나노튜브의 수소저장거동 (Hydrogen Storage Behaviors of Multi-walled Carbon Nanotubes Modified by Physical Activation Process)

  • 박수진;이슬이;김병주
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 춘계학술대회 논문집
    • /
    • pp.765-768
    • /
    • 2009
  • In this work, we prepared the activated multi-walled carbon nanotubes (Acti-MWNTs) with well developed physical surface structures, high specific surface area, and higher adsorption capacity by a physical activation process, in order to enhance the hydrogen storage capacity. The Acti-MWNTs' changes in the crystalline phase and in their lattice distortions were characterized by X-ray diffraction (XRD). The textural properties of the Acti-MWNTs were investigated by a nitrogen adsorption isotherms by Brunauer-Emmett-Teller (BET) equation and Harvath-Kawazoe (H-K) calculation, respectively. The hydrogen storage capacity of the Acti-MWNTs was investigated by BEL-HP at 298 K/100 bar. The hydrogen storage capacity of the Acti-MWNTs was improved with the physical activation, resulted from the formation of new hydrogen-favorable sites on the Acti-MWNT surfaces. In conclusion, the physical activation was one of the effective method to enhance the hydrogen storage capacity of the MWNTs.

  • PDF

농촌활성화사업과 지역특화발전특구제도의 고찰 (A Study on the Rural Activation Project and the Special Economic Zone for Regional Development Policy)

  • 정진주
    • 한국농촌건축학회논문집
    • /
    • 제7권3호
    • /
    • pp.1-8
    • /
    • 2005
  • Decrease in Population and graying of rural area by industrialization and urbanization are gone continuously. This makes happened various rural problems and the differential of standard of living with is arising day by day. Government is unfolding rural supporting project to solve continuously these problems. Recent Projects which are choosing not top-down process by government leading but bottom-up process through village inhabitants' participation and expert consultant get positive estimation. But those have difficulties because the support is attained only in the beginning step not continuously and inhabitants' number by graying is decreasing. The Special Economic Zone for Regional Development Policy is new access that regulation can differ according to special quality of each area depending on Localization Age. Through this transfer the competence that can mitigate or reinforce various regulations according to special quality of area in local government. So, back and maintain activation systematically so that each area could be developed specially. The purpose of The Special Economic Zone for Regional Development Policy is the activation of regional economy through development that regional specific character is. And there is characteristic that local government plans and takes the lead in all project contents, government gives regulation benefit by appointing the special economic zone and do not support finance and various tax remissions. Through investigation of such new policy, I wish to recognize what long-term plan and method could be possible to success rural activation continuously.

  • PDF