• Membrane Journal
• /
• v.11 no.3
• /
• pp.124-132
• /
• 2001

Silica membranes were prepared on a porous ${\alpha}$-alumina tube with pore size of 150nm by sol-gel and chemical vapor deposition(CVD) method for hydrogen separation at high temperatures. Silica and ${\gamma}$-lumina membranes formed by the sol-gel method possessed a large amount of mesopores of a Knudsen diffusion regime. In order to improve the $H_2$ selectivity, silica was deposited in the sol-gel derived silica/${\gamma}$-alumina layer by thermal decomposition of tetraethyl orthosilicate(TEOS) at $600^{\circ}C$. The CVD with forced cross flow through the porous wall of the support was very effective in plugging mesopores that were left unplugged in the membranes. The CVD modified silica/alumina composite membrane completely rejected nitrogen permeation and thus showed a high $H_2$ selectivity by molecular sieve effect. the permeation of hydrogen was explained by activated diffusion and the activation energy was 9.52kJ/mol.

• KSBB Journal
• /
• v.19 no.6 s.89
• /
• pp.467-470
• /
• 2004

We have investigated the key parameters affecting ATP regeneration in a cell-free protein synthesis system derived from Escherichia coli. When glucose-6-phosphate was used as an energy source, the efficiency of ATP regeneration sharply responded to pH change of reaction mixture. In addition, both productivity and reproducibility of protein synthesis was substantially enhanced by introducing appropriate amount of NAD into the reaction mixture. As a result, through the activation of glycolytic pathway under an optimal pH, the batch cell-free system produced over $300\;{\mu}g$ of protein in a 1 mL reaction.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.6
• /
• pp.1409-1415
• /
• 2009

Obesity is especially a serious health problem in industrialized countries, because it is considered to be a risk factor associated with the genesis or development of various metabolic diseases, including cardiovascular disease and type 2 diabetes mellitus. The purpose of this study was to investigate the effects of tanshinone IIA from Salvia miltiorrhiza Bunge on induction of apoptossis and inhibition of adipogenesis in in 3T3-L1 preadipocytes and adipocytes. The results demonstrated that tanshinone IIA decreased cell population growth of 3T3-L1 preadipocytes, assessed with the MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide] and LDH (lactate dehydrogenase) assay. Flow cytometric analysis of 3T3-L1 preadipocytes exposed to tanshinone IIA showed that apoptotic cells increased in a timeand dose-dependent manner. Treatment with tanshinone IIA decreased the number of normal cells and increased the number of apoptotic cells in a dose-dependent manner. The induction of apoptosis in 3T3-L1 preadipocytes by tanshinone IIA was mediated through the activation of caspase-3 and Bax, and then through the cleavage of PARP and the down-regulation of Bcl-2. Moreover, tanshinone IIA significantly decreased the amount of intracellular triglycerides and GPDH (glycerol-3-phosphate dehydrogenase) activity in 3T3-L1 adipocytes. Our results suggest that tanshinone IIA efficiently induces apoptosis and inhibits adipogenesis in 3T3-L1 preadipocytes and adipocytes.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.7
• /
• pp.1131-1140
• /
• 2017

This study is concerned with a design methodology of optimized fuzzy clustering-based neural network classifier for classifying black plastic. Since the amount of waste plastic is increased every year, the technique for recycling waste plastic is getting more attention. The proposed classifier is on a basis of architecture of radial basis function neural network. The hidden layer of the proposed classifier is composed to FCM clustering instead of activation functions, while connection weights are formed as the linear functions and their coefficients are estimated by the local least squares estimator (LLSE)-based learning. Because the raw dataset collected from Raman spectroscopy include high-dimensional variables over about three thousands, principal component analysis(PCA) is applied for the dimensional reduction. In addition, artificial bee colony(ABC), which is one of the evolutionary algorithm, is used in order to identify the architecture and parameters of the proposed network. In experiment, the proposed classifier sorts the three kinds of plastics which is the most largely discharged in the real world. The effectiveness of the proposed classifier is proved through a comparison of performance between dataset obtained from chemical analysis and entire dataset extracted directly from Raman spectroscopy.

• Economic and Environmental Geology
• /
• v.46 no.1
• /
• pp.29-37
• /
• 2013

In order to apply the silver cementation method using Fe powder from pregnant thiourea leaching solution. Parameters such as the amount of Fe powder addition, agitation speed, and temperature were investigated. The silver cementation rate was increased by the increasing of Fe powder addition, agitation speed, and temperature. The highest silver cementation rate was found when the addition of Fe powder was 50 g/L at the agitation speed of 500 rpm. The silver cementation rate increase with increasing temperature according to the Arrhenius equation and obeys $1^{st}$ order kinetics. The activation energy from the kinetics data was found to be between 13.73 KJ/mol and 17.02 KJ/mol. In the XRD analysis, goethite was detected in the precipitate of the thiourea leach solution. This indicates that an oxidation-reduction reaction had occurred in the thiourea solution due to the addition of the Fe powder.

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.64-68
• /
• 2005

To recycle collected high-impact polystyrene (HIPS) wastes as liquid fuel, depolymerization characteristics of HIPS by pyrolysis was studied. The effects of temperature and time on the pyrolysis of HIPS were investigated. The depolymerization temperature and activation energy of HIPS pyrolysis increased with increasing heating rate. In general, conversion and liquid yield gradually increased with pyrolysis temperature and pyrolysis time. Each liquid product formed during pyrolysis was classified into gasoline, kerosene, light oil and heavy oil according to the distillation temperature based on the petroleum product quality standard of Korea Petroleum Quality Inspection Institute. As a result, the amount of liquid products produced during HIPS pyrolysis was in the order of gasoline》heavy oil〉kerosene〉light oil. Especially 51${\pm}$6 wt% of HIPS treated was obtained as gasoline.

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.41-47
• /
• 2005

The transesterification of dimethyl terephthalate (DMT) with 1,3-propanediol (PDO) was investigated in the presence of catalyst, titanium (IV) butoxide (TBO), at 175~190 $^{\circ}C$ . The degree of transesterification reaction was measured by the output of methanol which was distilled from the reactor. The amount of methanol increased as the reaction temperature, molar ratio and catalyst concentration increased. The observed overall rate of the transesterification was third order; first order with respect to DMT, PDO, and the concentration of catalyst, respectively. Using calculated rate constants, the activation energy for transesterification was 26.93 kcal/mole. The melting temperature of bis(2-hydroxytrimethyl) terephthalate (BHTMT) was 85.2$^{\circ}C$ and heat of fusion 141.3 J/g.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.18 no.1
• /
• pp.15-28
• /
• 2005

To address the ability of Kung-Kyung-Ilho-Jeon(KK) to induce cell death, we investigated the effect of KK on cell viability. Forty-eight hours later, loss of viability occurred following KK exposure in a dose-dependent manner. The treatment of KK, a commonly used herb formulation in Korea and China, caused a decrease in cell viability. KK also resulted in apoptotic morphology a brightly blue-fluorescent condensed nuclei by Hoechst 33258-staining, and reduction of cell volume. Our results show that KK induces caspase-3 and -9 activation in a time-dependent manner. In addtion, the translocation of cytochrome c release into cytoplasm has been observed under the presence of $5mg/m{\ell}$ KK. The subsequent loss of mitochondria membrane potential is collapsed by the addition of KK. Our immunoblotting data show that PARP, a well known caspase-3 and -6 substrate, is cleaved by KK. We show that a pro-apoptotic protein, Bax is increased in the presence of KK but that the amount of Bcl-2 is not changed. We suggest that Bax, a critical protein which can regulate channel of mitochondria to release cytochrome c, is a key protein in KK-induced apoptosis of Hela human cervical carcinoma cells

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.5
• /
• pp.1271-1274
• /
• 2006

We investigated the effects of aqueous extracts from twelve medical herbs on ${\alpha}$-melanocyte stimulating hormone (${\alpha}$-MSH)-induced melanogenesis in B16F10 mouse melanoma cell. The cells were incubated with ${\alpha}$-MSH and aqueous extracts 5 days and 2 days and then analysed melanin amount and tyrosinase activities, respectively. Nine aqueous extract of herbs examined at 1 mg/m${\ell}$ level decreased melanin synthesis in B16F10 cell, especially in Agastache rugosa, Leonurus siviricus and Murus bombycis. The significant decrease of released extracellular melanin were also observed in treated cells with aqueous extract from Leonurus siviricus, Murus bombycis and Ledebouriella seseioides. The ${\alpha}$-MSH-induced activation of tyrosinase was inhibited in cells treated with aqueous extract from Cuscutae semen, Angelica tenuissima and Agastache rugosa. These results suggest that herbs inhibiting melanogenesis through tyrosinase activity may apply to develop whitening drugs and cosmetics.

• Korean Journal of Metals and Materials
• /
• v.50 no.1
• /
• pp.52-58
• /
• 2012

Hydrogen-delayed fracture (HDF) was analyzed from the deposited weld metals of 600-MPa and 800-MPa flux-cored arc (FCA) welding wires, and then from the diffusible hydrogen behavior of the weld zone. Two types of deposited weld metal, that is, rutile weld metal and alkali weld metal, were used for each strength level. Constant loading test (CLT) and thermal desorption spectrometry (TDS) analysis were conducted on the hydrogen pre-charged specimens electrochemically for 72 h. The effects of microstructures such as acicular ferrite, grain-boundary ferrite, and low-temperature-transformation phase on the time-to-failure and amount of diffusible hydrogen were analyzed. The fracture time for hydrogen-purged specimens in the constant loading tests decreased as the grain size of acicular ferrite decreased. The major trapping site for diffusible hydrogen was the grain boundary, as determined by calculating the activation energies for hydrogen detrapping. As the strength was increased and alkali weld metal was used, the resistance to HDF decreased.