• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.223-229
• /
• 2017

When concrete is exposed to neutron rays for a long time, the concrete tends to become activated. If activated, it is classified as middle or low level radioactive waste. However, the great amount of the activated concrete is hard to dispose. In this study, low-activation cement was developed for decreasing the activated waste from shielding concrete around nuclear reactor. Furthermore, the manufactured low-activation was analyzed with activation nuclide Eu, Co. The low-activation cement showed great advantage for low-activation with detecting none of Eu and 3.75ppm of Co while ordinary portland cement showed 0.4~0.9ppm of Eu, 5.5~19.8ppm of Co content. As the results of physical properties of the low-activation cement, it is similar to type 1 ordinary portland cement and accords with type 4 low heat portland cement. Meanwhile, as for the chemical properties of the cement, it accords wite type 1 and 4 at the same time.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.468-474
• /
• 2003

Activated carbon fibers were prepared from stabilized PAN fibers by physical and chemical activation to compare their characteristics. In this study, stabilized PAN fibers were activated by physical activation with steam and CO$_2$, and by chemical activation with KOH. The fabricated activated carbon fibers were evaluated and compared such as specific surface area, pore size distribution, pore volume, and amount of iodine adsorption. In the steam activation, a specific surface area of 1635 m$^2$/g was obtained after heat treatment at 990$^{\circ}C$. Otherwise, in the CO$_2$ activation, produced activated carbon fibers had been a specific surface area of 671 m$^2$/g after heat treatment at 990$^{\circ}C$. In chemical activation using KOH, a specific surface area of 3179 m$^2$/g was obtained with a KOH/ stabilized PAN fiber ratio of 1.5 : 1 at 900$^{\circ}C$. Nitrogen adsorption isotherms for fabricated activated carbon fibers showed type I and transformation from type I and II in the Brunauer-Deming-Deming-Teller (B.D.D.T) classification. Increasing specific surface area Increased the amount of iodine adsorption in both activation methods. Because the ionic radius of iodine was smaller than the interior micropore size of activated carbon fibers.

• Journal of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.214-218
• /
• 1981

Kinetic studies were carried out on urethane polymerization reaction of hydroxyl-terminated polybutadiene with isophorone diisocyanate under presence of Hexogen as solid additive. The rate was found to increase with the amount of Hexogen added. However the rate acceleration was not a catalytic effect but solely due to an increase of activation entropy. The reaction was a good 2nd order process with nearly constant activation energy of 8.4 kcal/mole.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.3
• /
• pp.131-137
• /
• 2007

The typical MCFC (molten carbonate fuel cell) anode is made of Ni-10%Cr alloy. The work of this paper is focused concerning long life of anode because Ni-10% Cr anode is suffering from sintering and creep behavior during cell operation. Therefore, Ni-coated Alumina powder($20{\mu}m$) was developed by electroless nickel plating. Optimum condition of electroless nickel coation on $20{\mu}m$ alumina is as follows: pH 11.7, temperature $65{\sim}80^{\circ}C$, powder amount $100cm^2/l$. The deposition rate for Ni-electroless plating was as a function of temperature and activation energy was evaluated by Arrhenius Equation thereby activation energy calculated slope of experimental data as 117.6 kJ/mol, frequency factor(A) was $6.28{\times}10^{18}hr^{-1}$, respectively.

• Journal of the Korean Chemical Society
• /
• v.64 no.3
• /
• pp.145-152
• /
• 2020

Flip-flop rate constants were measured by dithionite assay of NBD-PE fluorescence in DMPC/POPC vesicles made of various DMPC/POPC ratios. The activation energy, enthalpy, entropy, and free energy were determined based on the transition state theory. We found that the activation energy, enthalpy, and entropy increased as the amount of POPC increased, but the activation free energy was almost constant. These experimental results and other similar studies allow us to propose that the POPC molecules included in DMPC vesicles affect the flip-flop motion of NBD-PE in DMPC/POPC vesicles via increasing the packing order of the ground state of the bilayer of the vesicles. The increase in the packing order in the ground state seems to be a result of the effect of the overall molecular shape of POPC with a monounsaturated tail group, rather than the effect of the longer tail group.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2683-2689
• /
• 2024

This work investigated the most suitable type of degrader (Cu, Al or Nb) and its thickness, taking into consideration the salient aspects of concrete activation for high-purity ⁸⁹Zr production by ⁸⁹Y(p,n)⁸⁹Zr nuclear reaction. The MCNP and FISPACT codes were used to determine the optimal degrader thickness and the radioactivity of shielding concrete by neutron activation, respectively. The results showed that the optimal thickness of the beam degraders was 1.16, 3.19, and 1.33 mm for Cu, Al, and Nb, respectively. The neutron production rate per proton and the energy and angular distributions of neutrons varied depending on the type of degrader. Considering the radioactivity of the target-room concrete and the amount of radioactive waste expected to be generated, the use of a 1.33-mm-thick Nb degrader for ⁸⁹Zr production was determined to be the best choice.

• Animal cells and systems
• /
• v.4 no.3
• /
• pp.273-278
• /
• 2000

Transforming growth factor-$\beta$ (IGF-$\beta$)s are multifunctional small polypeptides synthesized in most cell types. TGF-$\beta$ exerts pivotal effects on both bone formation and resorption. In addition, increasing lines of evidence implicate TGF-$\beta$ as a potential coupling factor between these two processes during bone remodeling. In the present study, the expression form and the activation mechanism of latent-TGF-$\beta$ were investigated using specific antibodies for each isoform. TGF-$\beta$s were observed to be synthesized and accumulated in a large amount in cultured osteoblastic cells. The estimated molecular weights of intracellular TGF-$\beta$2 and -$\beta$3 were 49 and 55 kDa, respectively. Based on proteolytic digestion study and immunofluorescence observation, these precursor forms seemed to be accumulated in distinct intracellular compartments. To examine whether the internal pool of TGF-$\beta$ was possiblely regulated by external signals, their biological activites were examined in a conditioned media of this cell. Although the intact conditioned media did not contain detectable TGF-$\beta$ activity, heat-treatment or acid-activation of the conditioned media revealed significant TGF-$\beta$ activity. Furthermore, in the presence of estrogen, this activity was dramatically diminished. It is known that activation of latent TGF-$\beta$ can be achieved by different chemical and enzymatic treatments, or by incubation with certain cell types. This extracellular activation was suggested as a key step in the regulation of TGF-$\beta$ activity. In addition to these extracellular activation, this study suggests that the synthesis and intracellular processing are important regulation steps for TGF-$\beta$ action. In addition, this regulation Is specific for TGF-$\beta$ type 2, because the change was not observed in TGF-$\beta$3 in osteoblastic cell line.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.174-184
• /
• 1997

Activated carbons were prepared from palm chars by steam activation. The effect of the activation temperature and time, steam concentration and flux on the n -butane adsorption properties were investigated on the basis of surface area, pore analysis and n-butane adsorption. The amount of n -butane adsorption increased with steam concentration and steam flux at higher activation temperature to the $900^{\circ}C$, however this tendancy on the activated carbons were not observed at the temperature above $900^{\circ}C$, It was shown that surface area was 978 $\textrm{m}^2$/g, average pore size was 9.3 $\AA$ and n-butane adsorption was 5.9 g /100ml in the activated carbons, prepared at $900^{\circ}C$, 185 minutes.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.3
• /
• pp.5-16
• /
• 1988

This experiment was executed to investigate the effect of activation of veneer surface by oxidizing agents, hydrogen peroxide and nitric acid, on bonding characteristics of Malas(Homalium foetidum Benth) plywood, in which the effects of these oxidizing agents amount, pretreatment time, and pressing time and temperatue on shear strength of the plywood were examined and discussed. In this research the activation of veneer surface by oxidants was effective in raising shear strength but the difference in shear strength was not observed between hydrogen peroxide and nitric acid treatment. Hydrogen peroxide treatment, however, seemed to be more profitable to industrial application because of its lower concentration and easier handling than nitric acid. The bonding method by lignin-phenol adhesive through surface activation revealed inferior shear strength to phenol- and urea-formaldehyde adhesive but superior water resistance to urea-formaldehyde adhesive and this bonding method, in addition, have the advantage of lower cost compared with phenol-formaldehyde adhesive, Therefore, this bonding method by lignin-phenol adhesive through surface activation seemed to economical in manufacturing of water-resistant wood panel materials in future.

• Carbon letters
• /
• v.4 no.2
• /
• pp.57-63
• /
• 2003

In polymer precursor based activated carbon, the structure of starting material is likely to have profound effect on the surface properties of end product. To investigate this aspect phenolic resins of different types were prepared using phenol, mcresol and formaldehyde as reactants and $Et_3N$ and $NH_4OH$ as catalyst. Out of these resins two resol resins PFR1 and CFR1 (prepared in excess of formaldehyde using $Et_3N$ as catalyst in the basic pH range) were used as raw materials for the preparation of activated carbons by both chemical and physical activation methods. In chemical activation process both the resins gave activated carbons with high surface areas i.e. 2384 and 2895 $m^2/g$, but pore size distribution in PFR1 resin calculated from Horvath-Kawazoe method, contributes mainly in micropore range i.e. 84.1~88.7 volume percent of pores was covered by micropores. Whereas CFR1 resin when activated with KOH for 2h time, a considerable amount (32.8%) of mesopores was introduced in activated carbon prepared. Physical activation with $CO_2$ leads to the formation of activated carbon with a wide range of surface area (503~1119 $m^2/g$) with both of these resins. The maximum pore volume percentage was obtained in 3-20 ${\AA}$ region by physical activation method.