• 제목/요약/키워드: Activated clay

검색결과 55건 처리시간 0.039초

포항-울산간의 점토자원의 지질과 그 물리화학적 특성에 관한 연구 (A Study on Geology of Clay Mineral Deposits of Pohang-Ulsan Area and their Physico-Chemical Properties)

  • 김옥준;이하영;김서운;김수진
    • 자원환경지질
    • /
    • 제4권4호
    • /
    • pp.167-215
    • /
    • 1971
  • I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

  • PDF

점토광물을 이용한 매립지 가스중 실록산 흡착에 관한 연구 (Adsorption of the Siloxane Contained in Landfill Gas using Clay Mineral)

  • 김종국;최호석;유인상
    • 공업화학
    • /
    • 제17권5호
    • /
    • pp.465-470
    • /
    • 2006
  • 실록산은 많은 소비 및 공업제품에 사용되고 있고 이들이 매립되어 발생되는 매립가스에는 휘발성 실록산을 포함한다. 휘발성 실록산을 포함한 매립가스를 가스엔진의 연료로 사용할 경우 매립가스내 휘발성 실록산은 가스엔진뿐만 아니라 전처리 시설에 큰 해를 입히게 된다. 따라서 본 연구에서는 매립가스내 휘발성 실록산 흡착제로서 활성탄 대용으로 천연 점토광물인 질석과 일라이트를 사용해 이의 유용성을 검토하였다. 질석, 일라이트 및 활성탄의 SEM 및 BET 분석을 통해 이들의 물성값을 비교하였다. 또한 일라이트 및 질석을 흡착제로 사용하여 D5 실록산의 흡착용량을 평가 하였는바, 각각 1.7 g/g 일라이트 및 3.8 g/g 질석의 대단히 높은 흡착용량을 나타내었다.

The Bleaching of the Korean Beeswax

  • Kwon, Hye-Soon
    • Preventive Nutrition and Food Science
    • /
    • 제3권4호
    • /
    • pp.374-378
    • /
    • 1998
  • The objectives of this study are to determine the optimum process conditions of Korean beeswax and discuss the parameter of adsorption . Purification conditions, such as time, temperature and the type of adsorbents were investigated using the relationship between the properties of refined products and process conditions and theiptimum bleaching condition of Korean beeswax were determined for the first time. The various bleaching conditions were examined by observing the result of Lovibond color, photometric color, methods provided by the American Oil Chemists '(A.O.C.S).The iptimum bleaching temperature was 8$0^{\circ}C$ and the bleaching agents (5% of the weight of beeswax) which consisted of activated clay and activated carbon and a vacuum system were also necessary.

  • PDF

박층(薄層) chromatography의 흡착제(吸着劑)로서 국내산(國內産) 활성백토(活性白土) 및 규조토(硅藻土)의 이용(利用)에 관(關)한 연구(硏究)(제일보)(第一報) - 식용(食用) tar색소(色素)의 분리분석(分離分析) - (The Use of Activated Clay and Kieserguhr as a TLC Adsorbent(I) - Analysis of Tar Food Colorants -)

  • 김병순;지봉호
    • 한국식품영양과학회지
    • /
    • 제6권1호
    • /
    • pp.66-71
    • /
    • 1977
  • An investigation of certain tar food colorants required a relatively inexpensive TLC adsorbent to be used in preparative thin-layer chromatography procedure. As will be shown activated clay and Kieselguhr has excellent physical characteristics for T LC applications, is easily applied, and is good for analytical work as well as showing good separator capabilities with selected groups of compounds. In addition to its usefulness its economical price suggested this article.

  • PDF

Properties of Hand-made Clay Balls used as a Novel Filter Media

  • Rajapakse, J.P.;Madabhushi, G.;Fenner, R.;Gallage, C.
    • Geomechanics and Engineering
    • /
    • 제4권4호
    • /
    • pp.281-294
    • /
    • 2012
  • Filtration using granular media such as quarried sand, anthracite and granular activated carbon is a well-known technique used in both water and wastewater treatment. A relatively new pre-filtration method called pebble matrix filtration (PMF) technology has been proved effective in treating high turbidity water during heavy rain periods that occur in many parts of the world. Sand and pebbles are the principal filter media used in PMF laboratory and pilot field trials conducted in the UK, Papua New Guinea and Serbia. However during first full-scale trials at a water treatment plant in Sri Lanka in 2008, problems were encountered in sourcing the required uniform size and shape of pebbles due to cost, scarcity and Government regulations on pebble dredging. As an alternative to pebbles, hand-made clay pebbles (balls) were fired in a kiln and their performance evaluated for the sustainability of the PMF system. These clay balls within a filter bed are subjected to stresses due to self-weight and overburden, therefore, it is important that clay balls should be able to withstand these stresses in water saturated conditions. In this paper, experimentally determined physical properties including compression failure load (Uniaxial Compressive Strength) and tensile strength at failure (theoretical) of hand-made clay balls are described. Hand-made clay balls fired between the kiln temperatures of $875^{\circ}C$ to $960^{\circ}C$ gave failure loads of between 3.0 kN and 7.1 kN. In another test when clay balls were fired to $1250^{\circ}C$ the failure load was 35.0 kN compared to natural Scottish cobbles with an average failure load of 29.5 kN. The uniaxial compressive strength of clay balls obtained by experiment has been presented in terms of the tensile yield stress of clay balls. Based on the effective stress principle in soil mechanics, a method for the estimation of maximum theoretical load on clay balls used as filter media is proposed and compared with experimental failure loads.

Experimental and Modeling Studies for the Adsorption of Phenol from Water Using Natural and Modified Algerian Clay

  • Djemai, Ismahane;Messaid, Belkacem
    • Korean Chemical Engineering Research
    • /
    • 제58권4호
    • /
    • pp.624-634
    • /
    • 2020
  • The ability of natural and modified clay to adsorb phenol was studied. The clay samples were analyzed by different technical instruments, such as X-ray fluorescence (XRF), X-ray diffraction (XRD) and FT-IR spectroscopy. Surface area, pore volume and average pore diameter were also determined using B.E.T method. Up to 73 and 99% of phenol was successfully adsorbed by natural and activated clay, respectively, from the aqueous solution. The experiments carried out show that the time required to reach the equilibrium of phenol adsorption on all the samples is very close to 60 min. The amount of phenol adsorbed shows a declining trend with higher pH as well as with lower pH, with most extreme elimination of phenol at pH 4. The adsorption of phenol increases proportionally with the initial phenol concentration. The maximum adsorption capacity at 25 ℃ and pH 4 was 29.661 mg/g for modified clay (NaMt). However, the effect of temperature on phenol adsorption was not significant. The simple modification causes the formation of smaller pores in the solid particles, resulting in a higher surface area of NaMt. The equilibrium results in aqueous systems were well fitted by the Freundlich isotherm equation (R2 > 0.98). Kinetic studies showed that the adsorption process is best described by the pseudo-second-order kinetics (R2 > 0.99). The adsorption of phenol on natural and modified clay was spontaneous and exothermal.

천연의 점토광물질 발효산물 급여에 의한 친환경 고품질 원료돈육 생산 (The Environment-Friendly High Quality Pork Production by feeding the Fermentation Products of Natural Clay Mineral)

  • 조진국;양승학;황성구
    • 한국축산시설환경학회지
    • /
    • 제18권sup호
    • /
    • pp.55-64
    • /
    • 2012
  • 축산물 생산은 집약적 사육환경으로 인한 각종 병원균이 내재한 가운데 이루어지고 있어 항생제 및 각종 사료첨가제등의 사용이 날로 증가해왔다. 한편, 축산물의 안전성에 대한 인식이 높아짐에 따라 농축산물 생산에 있어서 안전성 확보에 대한 연구가 절실히 요구되고 있다. 따라서 본 연구에서 특수발효 미생물을 이용하여 복합미량원소(Se, Ge, Zn, S)를 강화시킨 점토광물질 발효 산물이 돈육의 생산성 및 품질에 미치는 영향을 조사하였다. 공시동물은 Large White와 Yorkshire 교잡종 80두를 대조구와 실험구로 임의 배치해 실험하였다. 실험 결과, 점토광물질 발효산물을 사료 내 0.3% 첨가 급여했을 때 사료섭취량 및 증체량, 사료효율, 도체의 pH, 육색의 명도와 대퇴부의 밝기 등은 일반사료를 급여한 군과 비슷하였으나, 지육율은 2.7%, 도체육의 적색도는 12%, 보수력은 10% 개선되고 가열감량은 6% 감소하였다. 또한 면역기능조절효과를 조사하기 위해 비육돈의 혈액을 채취하여 혈액 내 말초혈액단핵세포의 증식 및 cytokine 분비 능을 조사한 결과, PBMC는 증식정도가 유의하게 증가하였고, LPS와 Con A를 처리하였을 때 대조구에 비해 더욱 뚜렷이 증가하는 것으로 나타났다. cytokine의 분비량도 TNF-${\alpha}$의 경우 약간 증가하는 경향을 보였다. 따라서 양이온 치환능력이 높고 원적외선 수치가 높은 점토광물 발효산물을 급여함으로써 면역능력이 강화되어 항생제를 사용하지 않고도 안전성 높은 고품질 친환경 돈육을 생산할 수 있는 가능성이 시사되었다.

산처리 과정에 따른 벤토나이트의 결정구조 변화 (The Effects of Acid Treatment of Bentonite on Its Crystal Structure)

  • 윤소정;문희수
    • 자원환경지질
    • /
    • 제27권6호
    • /
    • pp.507-521
    • /
    • 1994
  • Bentonite occurs in the Janggi Conglomerate of Tertiary age and consists mainly of montmorillonite with Mg as predominant interlayer cations. The bentonite was reacted with various concentrations of sulfuric acid (0.8~1.5M) for various reaction time (1-10h) at $103^{\circ}C$. Cation exchange capacity, exchangeable cations, surface area and solid acidity of the original bulk and acid activated bentonites were measured. Chemical analysis, X-ray diffraction, differential thermal analysis and infrared spectroscopy were used to characterize the changes in structure and properties of the acid activated bentonite. The dissolution of octahedral cations occurs not only from the edge of the clay platelets but also throughout the whole clay structure creating vacant octahedral sites. These lattice defects are created by $H^+$ diffused into the smectite layers. The cations leached possibly from the octahedral sheets are adsorbed on the interlayer exchange sites. They are exchanged with hydronium ions again by stronger acid attack. These reactions create wedge-shaped pores resulting in the increase of the surface area and the changes the morphology in the lattice structure.

  • PDF

활성백토를 흡착재로 활용한 경화체의 실내 공기 개선 평가 (Evaluation of Indoor Air Improvement of Matrix Using Activated clay as Adsorption Material)

  • 정현수;김연호;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2020년도 봄 학술논문 발표대회
    • /
    • pp.189-190
    • /
    • 2020
  • The importance of indoor air quality management has recently been highlighted due to environmental problems such as indoor air pollution. Among indoor air pollutants, carbon dioxide occurs in cooking, heating, burning, and causes forgetfulness, dementia and amnesia. Radon, which occurs in building materials, soil and ground, is a type 1 carcinogen that causes lung cancer in the body through breathing. These substances can be released from the room through ventilation, but there is a limit to reducing the amount of indoor activity due to reduced ventilation conditions due to increased indoor activity time. However, these substances can be removed from the gas by adsorption. The purpose of this study was to identify the properties of granular active and powdered active white soil and mix them to make cement-based active white soil adsorbent matrix for carbon dioxide, fine dust and radon gas adsorption, and to evaluate indoor air improvements according to the mixing scale. The results of the experiment showed that active carbon dioxide adsorption performance increased for carbon dioxide and radon as the exchange rate increased through physical adsorption. In particular, the higher the replacement rate of the granular active bag, the better adsorption performance was shown.

  • PDF

Sorption Behavior of 1-Methylcyclopropene on Adsorbing Agents for Use in Extending the Freshness of Postharvest Food Products

  • Lee, Youn-Suk;Shin, Han-Seung
    • Food Science and Biotechnology
    • /
    • 제15권4호
    • /
    • pp.572-577
    • /
    • 2006
  • The physiochemical interactions of 1-methylcyclopropene (1-MCP) and adsorbing agents can be described using a very powerful tool, inverse gas chromatography (IGC). Sorption behavior of 1-MCP on various adsorbing agents was assessed using the profile peaks of 1-MCP at an infinite dilution concentration using the IGC technique. Chromatogram peaks of 1-MCP adsorption were not observed for the adsorbing agent activated carbon. The forms of sorption isotherms followed Henry's law, and behaved according to the binding site theory. Specific retention volume and distribution coefficients for 1-MCP on the adsorbing agents were determined at 50, 60, 70, and $80^{\circ}C$, respectively. Silica gel had a much higher number of binding sites for 1-MCP compared to Tenax-TA and activated clay agents. Meanwhile, activated carbon proved to be a very strong binding agent for 1-MCP based on 1-MCP efficiency experiments on the selected adsorbing agents. However, as a proper means of delivering 1-MCP molecules to fresh food products, activated carbon is not fit for the binding and release of 1-MCP gas under dry or high humidity conditions because activated carbon has a strong affinity for 1-MCP, even when treated with distilled water.