• 대한화학회지
• /
• 제14권4호
• /
• pp.309-319
• /
• 1970

Composition of Acid Clay, the raw material for activated clay manufacturing, was investigated to develop useful data in deciding activation condition. Speculations on components and structure of activated clay were also made in order to see how included components of raw materials change during activation process. And a study was made on relations between structure of activated its adsorptivity. For this research, theremogravimetric analysis, X-ray differaction analysis and calculation of adsorptive index were carried out.

• 한국환경과학회지
• /
• 제11권9호
• /
• pp.961-969
• /
• 2002

This study was performed : 1) to establish the experimental analysis conditions for the sorption and desorption of toxic organic contaminants to/from the activated sludge, sediment, and clay, and 2) to determine the sorption and desorption equilibrium coefficients of some representative halogenated aliphatic compounds. Through the preliminary sorption test using Azo dye, a setting of quantitative experimental conditions to determine the sorption and desorption characteristics was decided as follows; equilibration time of 180 minutes, centrifuge for 15 minutes at 5000$\times$g, and 500mg/$\ell$ of TOC concentration. The sorption and desorption characteristics of halogenated aliphatic compounds onto activated sludge, sediment and clay could be described very well using the Freundlich isotherm. The preference of the average sorption capacity of the overall compounds showed in the sequence sediment 0.26mg/g, clay 0.23mg/g, and activated sludge 0.11 mg/g. The desorption rate of the sorbed compounds onto activated sludge, sediment and clay was approximately 89.8%, 35.3%, and 66.4%, respectively.

• 대한화학회지
• /
• 제14권4호
• /
• pp.297-308
• /
• 1970

In order to search a method of manufacturing better activated clay in an effcient way, attempt was made to select particularly samples for activation to concentrate the research upon them with varied activation to concentrate the research upon them with varied activation conditions. Special attention was also made to the low quality materials because they may become good activated clay if treated under a suitable activation condition.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.19-20
• /
• 2021

In order to reduce the emission of harmful substances that degrade indoor air quality, the Ministry of Environment strengthened the standards for the content of VOCs in paints to supply and sell eco-friendly paints. In this related study, an eco-friendly paint mixed with a powder-type absorbent material was prepared and its characteristics were reviewed. As the amount of powder-type absorbent material increased, the workability (viscosity, peeling, etc) decreased. Accordingly, this study aims to examine which particle size is suitable according to the particle size of the granular adsorbent while improving the problem of the powdery adsorbent by using the granular adsorbent. As an experimental plan, the particle size of granular activated clay is selected to be 0.250, 0.425, 0.710(mm), and the decrease rate of VOCs concentration and impact resistance are reviewed. As a result of the experiment, as the particle size of the granular activated clay increased, the decrease rate of the VOCs concentration increased and the impact resistance improved. Therefore, considering the problems that occur after actual painting, the particle size of granular activated clay of 0.425mm is suitable.

• Journal of the Korean Wood Science and Technology
• /
• 제31권6호
• /
• pp.83-88
• /
• 2003

The woodceramics are porous amorphous carbon and glassy carbon composite materials. Woodceramics attracted a lot of attention in recent years because they are environmentally friendly and because of their unique functional characteristics such as catalysis, moisture absorption, deodorization, purification, carrier for microbial activity, specific stiffness, corrosion and friction resistance, and their electromagnetic shielding capacity. In this paper, we made new products of clay-woodceramics to investigate the industrial analysis and ethylene gas adsorption for basic data of building- and packging- materials keeping fruit fresh for a long time. Clay-woodceramics were carbonized for 3 h of heating in a special furnace under a gas flow of nitrogen(15 ml/min.) from 3 layers-clay-woodparticleboard made from pallet waste wood, phenol- formaldehyde resin(hereafter PF, Non volatile content:52%, resin content 30%), and clay(10%, 20% and 30%). Carbonization temperature was 400℃, 600℃ and 800℃. Experimental results shows that the higher the carbonization temperature, the higher the fixed carbon and the lower the volatile contents. The higher the clay content, the more the ash content. The higher the carbonization temperature, the more the ethylene gas adsorption. Carbonization temperature of 800℃ gave the best reslts as same as that of white charcoal and activated carbon.(800℃-clay-woodceramic: 5.36 ppm, white charcoal: 5.66 ppm, activated carbon: 5.79 ppm) The clay contents did not make difference of ethylene gas adsoption.

• 한국도로학회논문집
• /
• 제14권1호
• /
• pp.55-61
• /
• 2012

본 연구는 도시지역 도로측구 등에 설치할 비점오염원의 정화장치 개발을 위해 여과재의 개발에 연구의 초점을 맞추었다. 필터는 다양한 미세기공을 갖고 있어 물리적 흡착능력이 뛰어나며, 결정 구조 안에 다양한 양이온이 배위되어 있어 화학적 흡착이 탁월한, 다공성 점토광물을 직경 3mm 볼 형태로 제작하였다. 성형한 필터에 도시지역 강우 직후 발생한 오염 원수를 통과시켜 SS, COD, T-P, T-N의 제거 능력을 폐수정화에 흔히 이용되는 첨착활성탄(Impregnated Activated Carbon) 필터와 비교 분석하였다. 다공성 점토광물 필터와 첨착활성탄 필터의 T-N과 T-P 여과능력은 거의 차이가 없음을 알 수 있었다.

• 대한화학회지
• /
• 제65권3호
• /
• pp.197-202
• /
• 2021

본 연구에서, 산성 백토를 황산(무게 비로 20%)와 90 ℃의 온도로 8시간 동안 가열하여 처리 한 활성 백토를 수중의 인산성 인(PO₄^3--P)의 제거를 위한 흡착제로서 사용하였다. 흡착 실험에 앞서 X-선 형광분광기와 표면적 분석기로 활성 백토의 특성을 조사하였다. 활성 백토에 의한 PO₄^3--P 흡착은 0.25 시간 이전에 가파르게 증가하였고 4시간에 이르렀을 때 평형에 도달하였다. 5 mg/L의 낮은 PO₄^3--P 농도에서, 대략 98%의 흡착효율이 활성 백토에 의해 성취되었다. PO₄^3--P의 흡착 데이터를 흡착 등온선과 반응속도 모델에 도입하였다. 활성 백토에 의한 PO₄^3--P 흡착거동은 Freundlich와 Langmuir 등온선 모두에 잘 적용되었다. 활성 백토에 의한 PO₄^3--P 흡착에 관해서 Freundlich와 Langmuir의 등온선 계수인 K_F와 Q는 각각 8.3과 20.0 mg/g이 되는 것으로 밝혀졌다. 물과 활성 백토 계에서의 PO₄^3--P 흡착은 더 높은 상관계수 R²와 실험값 q_e,exp과 계산값 q_e,cal의 근접으로 인해서 유사 일차 보다는 유사 이차 반응속도식에 적합하였다. 연구의 결과들은 활성 백토가 수중으로부터 인을 제거하는데 효율적인 흡착제로 사용될 수 있다는 것을 보였다.

• 한국환경과학회지
• /
• 제7권3호
• /
• pp.269-274
• /
• 1998

In order to develop of support medla for bloom reactor, physicochemical properties and attachability of surface of activated carbon, clay mineral, non-clay mineral, and waste mold sand were enamined. Measured physicochemical properties of materials were surface roughness, mean particle size, surface area, hydrophobicity, and surface charge. At a tested materials, activated carbon was the best attachable material and microorganisms were attached $20.1{\times}10^7CFU/cm^2$ at surface, compared with diatomaceous earth which were attached of $9.2{\times}10^7CFU/cm^2$ in our research, surface area and hydrophobicity show- ed more Influence than any other factor on attachment of microorganisms.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.35-36
• /
• 2023

Safety management of steel frame members is a very important part to maintain safety and function. However, precise inspection is not possible for steel frame members due to finishing materials and insulation materials, leading to poor inspection. For steel members, an insulating spray coating method is used for high thermal conductivity. The insulation spray method is not only uneconomical, but also has the disadvantage of spoiling the aesthetics. In addition, VOCs are released from paints used in spraying, so a solution is needed. In this study, heating paint was used to improve the disadvantages of the insulation spray coating method and the high thermal conductivity of steel frame members. In addition to this, in order to reduce VOCs generated from the paint, active clay was added to produce a functional exothermic paint, and then the experiment was conducted. As the amount of activated clay increased, the film thickness increased, and the VOCs emission and thermal conductivity decreased.

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2002년도 추계학술발표회 논문집
• /
• pp.55-58
• /
• 2002

No Abstract, See Full Text