• 한국막학회:학술대회논문집
• /
• 한국막학회 1997년도 제5회 하계 Workshop (97 한,카 국제공동 Workshop, 고도 수처리를 위한 막분리 공정)
• /
• pp.207-231
• /
• 1997

The use household water purifier is continuously increasing due to the distrust of the piped, rap water, which may be caused by the deterioration of water quality and water supply facilities in Korea. The water purifier distributing in the domestic market is the membrane type that composes of membrane as a basic filter, sediment filter as a prefilter and activated carbon filter instead of one purifying water system. The membrane type using as a water cleaning system is mainly the method of micro filtration(NIF) as well as ultra filtration(UF) and reverse osmosis(RO). The types of MF and UF are using to remove suspended solids and virus, and RO is using to remove ionic compound in chemical organic compounds. At the beginning the household water purifier was imported as end-product or assembled by only importing module from small businesses in Korea. Therefore, people was hard to confide in the product quality because the sales policy and management of water purifier by small business were not effectively organized. However, the defects of water purifier having up to now ate improving by the efforts of special branches of water purifier and large enterprises, and new great products are developing and producing. To develop the best quality product of water purifier in Korea, it should be considered seasonal water characteristrics rather than any other condition. For example, the water purifier can be affected by the water temperature change, increase of suspended solids in the rainy season and inflow of raw water having concentration in a dry season. The subject we have to investigate in the future is to develop the water purifying system adaptable in Korea which can treat the water quality using close analyses of local and seasonal water characteristics.

• 한국조리학회지
• /
• 제22권8호
• /
• pp.149-156
• /
• 2016

본 연구의 목적은 조리과정에서 발생한 총휘발성 유기화합물질, 미세먼지, 악취, 총부유세균 등의 오염물질들이 조리실내로 분산되어 실내공간이나 조리업 종사자에게는 나쁜 냄새나 작업환경 및 건강피해를 감소하고자 하는 것이다. 이를 위해 기존 공기청정기의 단점을 보완하고, 반영구적이며, 각종 오염물질을 효율적으로 제거하기 위하여 활성탄과 황토를 결합한 바이오세라믹 필터를 bar type으로 제작한 실내용 소형 공기청정기 개발에 중점을 두었다. 측정항목은 총휘발성 유기화합물, 미세먼지, 복합악취, 총부유세균 등 모두 4가지 항목으로 개발된 공기청정기 가동 전과 일정시간 가동 후를 비교하여 측정하였다. 측정결과, 총휘발성 유기화합물의 농도는 평균 $2,500{\mu}g/m^3$에서 $223{\mu}g/m^3$으로 약 91.02%의 높은 제거효율을 보였으며, 미세먼지의 제거율은 평균 농도가 $26.68{\mu}g/m^3$로서 97.51%의 우수한 제거효과가 나타났으며, 복합악취의 희석배수를 측정한 결과 평균 144로 평균 95.20% 감소하였다. 또 총부유세균은 초기 농도가 $787{\sim}814CFU/m^3$에서 $47{\sim}40CFU/m^3$로 약 94% 이상 제거되는 것을 확인하였다. 결론적으로 개발되어진 공기청정기의 바이오세라믹 필터는 오염물질을 제거하는데 우수한 제거효과를 나타냈다. 따라서 공기청정기를 조리실내에서 환기장치와 렌지후드를 병행하여 사용하면 기존의 열악한 조리실 내의 환경이 크게 개선되어질 것으로 사료된다.

• E2M - 전기 전자와 첨단 소재
• /
• 제12권7호
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

• 자원리싸이클링
• /
• 제28권6호
• /
• pp.64-72
• /
• 2019

플라이애시는 발전소의 탄종 및 품질에 따라 화학조성이 다르고 품질 변화가 크며 탄소함량과 입경에 따라 분류하며, 폐유리분말은 파유리를 분쇄하여 제조하고 분쇄정도에 따라 분류한다. 건축물의 외단열 공법은 경제적이면서 단열성능이 우수한 폴리스티렌 폼 단열재를 활용한 공법이 일반적이다. 하지만 유기계 단열재는 단열성능이 우수하나 화재에 취약하고 다수의 문제점이 지적되었다. 본 연구에서는 플라이애시와 폐유리분말을 사용하여 고온에서 안정한 외단열용 마감모르타르를 제작하고 고온 강도 및 난연 특성을 검토하였다. 실험 결과, 플라이애시와 폐유리분말을 이용한 마감모르타르는 고온에서의 안전성이 높았다. 하지만 강도감소의 폭이 크므로 적절한 배합조건의 선정이 필요하다.

• 한국환경보건학회지
• /
• 제30권5호
• /
• pp.481-486
• /
• 2004

Vehicle occupant exposure to air pollutants has been a subject of concern in recent years because of higher levels of air pollutants inside gasoline or diesel-using vehicle, comparing to the surrounding atmosphere. Contrary to previous studies, fuel of vehicles operated in this study was liquefied petroleum gas (LPG). This study examined the potential exposure and removal efficiency of selected volatile organic compounds (VOCs), nitrogen dioxide ($NO_2$) and respirable suspended particle (RSP) by commercial air cleaning device inside vehicle under different ventilation conditions. Vehicle concentrations inside of benzene, toluene, m,p-xylene, $NO_2$ and RSP were lower under the low ventilation condition. This was indicated that outdoor air pollutants could affect the vehicle air quality inside in case metropolitan cities such as Daegu. The urban vehicle concentrations inside of benzene, toluene, m,p-xylene, $NO_2$ and RSP with air cleaning device were higher than those without air cleaning device. This means that the use of air cleaning device equipped with activated carbon filter, which was used in this study, in the interior of vehicles could be expected to reduce the vehicle occupants exposure to air pollutants effectively. In batch type reactor of laboratory scale, removal efficiencies of air cleaning device used were $97.0\%,\;95.7\%,\;94.6\%\;and\;85.5\%$ respectively in benzene, toluene, m,p-xylene and $NO_2$.

• 한국재료학회지
• /
• 제29권12호
• /
• pp.774-780
• /
• 2019

The performance of Li-ion hybrid supercapacitors (asymmetric-type) depends on many factors such as the capacity ratio, material properties, cell designs and operating conditions. Among these, in consideration of balanced electrochemical reactions, the capacity ratio of the negative (anode) to positive (cathode) electrode is one of the most important factors to design the Li-ion hybrid supercapacitors for high energy storing performance. We assemble Li-ion hybrid supercapacitors using activated carbon (AC) as anode material, lithium manganese oxide as cathode material, and organic electrolyte (1 mol L^-1 LiPF₆ in acetonitrile). At this point, the thickness of the anode electrode is controlled at 160, 200, and 240 ㎛. Also, thickness of cathode electrode is fixed at 60 ㎛. Then, the effect of negative and positive electrode ratio on the electrochemical performance of AC/LiMn₂O₄ Li-ion hybrid supercapacitors is investigated, especially in the terms of capacity and cyclability at high current density. In this study, we demonstrate the relationship of capacity ratio between anode and cathode electrode, and the excellent electrochemical performance of AC/LiMn₂O₄ Li-ion hybrid supercapacitors. The remarkable capability of these materials proves that manipulation of the capacity ratio is a promising technology for high-performance Li-ion hybrid supercapacitors.

• 한국물환경학회지
• /
• 제23권5호
• /
• pp.689-696
• /
• 2007

Kinetic analysis was important to develope the biological nutrient removal process effectively. In this research, anoxic-anaerobic-aerobic system was operated to investigate kinetic behavior on the nutrient removal reaction. Nitrification and denitrification were important microbiological reactions of nitrogen. The kinetics of organic removal and nitrification reaction have been investigated based on a Monod-type expression involving two growth limiting substrates : TKN for nitrification and COD for organic removal reaction. The kinetic constans and yield coefficients were evaluated for both these reactions. Experiments were conducted to determine the biological kinetic coefficients and the removal efficiencies of COD and TKN at five different MLSS concentrations of 5000, 4200, 3300, 2600, and 1900 mg/L for synthetic wastewater. Mathematical equations were presented to permit complete evaluation of the this system. Kinetic behaviors for the organic removal and nitrification reaction were examined by the determined kinetic coefficient and the assumed operation condition and the predicted model formulae using kinetic approach. The conclusions derived from this experimental research were as follows : 1. Biological kinetic coefficients were Y=0.563, $k_d=0.054(day^{-1})$, $K_S=49.16(mg/L)$, $k=2.045(day^{-1})$ for the removal of COD and $Y_N=0.024$, $k_{dN}=0.0063(day^{-1})$, $K_{SN}=3.21(mg/L)$, $k_N=31.4(day^{-1})$ for the removal of TKN respectively. 2. The predicted kinetic model formulae could determine the predicted concentration of the activated sludge and nitrifier, investigate the distribution rate of input carbon and nitrogen in relation to the solid retention time (SRT).

• 한국건설순환자원학회논문집
• /
• 제4권2호
• /
• pp.157-164
• /
• 2016

본 연구에서는 고로슬래그 미분말 다량 치환한 시멘트 모르타르의 자극재로 탈황석고(FGD)를 사용한 경우, FGD에 포함되어 있는 활성탄의 제거로 체가름방법과 고온가열 조건을 원분과 비교하고, 또한 골재로서 순환골재(RFA)와 천연골재(NFA)를 사용하는 골재종류 변화 조건에서 각종 품질특성을 검토하였다. 실험결과 FGD의 활성탄 제거방법은 $500^{\circ}C$ 고온가열보다 0.3mm 체가름법이 우수하였고, FGD 치환율은 5~10%일 때, 잔골재는 NFA보다 RFA에서 비교적 양호한 결과를 얻을 수 있었다. 그러나 RFA를 이용한 모르타르의 경우는 실무 활용시 건조수축 길이변화율 및 흡수율 측면에서는 용도제한 및 별도의 품질향상 대책이 요구되었다.

• 대한환경공학회지
• /
• 제22권5호
• /
• pp.959-970
• /
• 2000

본 연구는 실험실 규모의 침지형 막분리 활성오니법을 이용하여 생물 대사 성분이 막투과 유속에 미치는 영향에 대해 고찰하였다. SMP와 분리막의 fouling과의 관계를 살펴보기 위해 연속 실험과 회분 실험으로 나누어 운전하였다. 합성 폐수로는 단일 탄소원으로서 phenol을 사용하였다. 생물 반응조의 체류 시간과 MLSS농도는 각각 12hr과 9.000mgVSS/L로 유지하였다. 연속 장치에 있어서 회분 여과 실험을 통해 SMP농도가 증가할수록 막투과 유속은 감소하였고, cake와 gel층이 형성을 증가시켰다. Cake의 저항은 $2.9{\sim}4.0{\times}10^{10}$으로 측정되어 다른 여과 저항보다 막투과 유속의 감소에 중요한 영향을 나타냈다. 회분 페놀 분해 실험에서 SMP종들 중에 $SMP_{nd}$와 $SMP_{e}$가 난분해성 고분자 물질로서 막투과 감소에 중요한 역할을 하였다. 또한, SMP농도는 막투과 유속의 감소에 대한 HRT의 증가로서 생물 반응조 내에 축적되었다.

• 분석과학
• /
• 제24권6호
• /
• pp.421-428
• /
• 2011

본 연구에서는 시료상층부 원판 형태 흡탈착 추출법(HS-MMSE)을 개발하여 검증하고 바닐라 향수의 휘발성 아로마 성분들의 기체 크로마토그래피-질량 분석법에 적용하였다. HS-MMSE 방법은 실리카에 octadecyl silane (ODS)과 활성탄을 결합하여 만든 단일 다공성 물질(monolithic material, MonoTrap)을 흡착제로 이용한다. MonoTrap은 시료상층부에서 아로마 성분들을 흡착하고 100 ${\mu}L$ 소량의 용매로 추출한다. HS-MMSE를 이용하여 바닐라 향수로부터 12개의 성분들을 성공적으로 분석하였다. 그 중 benzyl acetate, linalyl acetate, vanillin, ethyl vanillin을 이용하여 추출 효율에 영향을 주는 파라미터들에 대한 실험을 통해 추출 조건을 최적화하였다. 또한, 대상 물질들에 대한 분석 방법의 검증 실험을 진행하였다. 그 결과, 검출한계, 정량한계는 각각 8.35~13.76 ng, 27.82~45.88 ng 범위였고 $r^2$값이 0.9888 이상인 우수한 직선성과 양호한 회수율 및 재현성을 얻었다. 이러한 결과들을 바탕으로 원판 형태 MonoTrap을 이용한 HS-MMSE 방법은 바닐라 향수의 휘발성 아로마 성분들을 분석하는데 효과적인 방법임을 확인하였다.