• 청정기술
• /
• 제27권2호
• /
• pp.160-167
• /
• 2021

본 연구에서는 시화반월산업단지에서 보편적으로 사용하고 있는 일반형 활성탄흡착탑과 활성탄 공동재생시스템 적용을 위해 개발된 카트리지형 활성탄흡착탑으로 개선하여 얻게 되는 환경적 효과분석을 고찰하였다. 일반형 활성탄흡착탑 4개소와 카트리지형 활성탄흡착탑 2개소를 선정하여 사용하고 있는 활성탄의 물성특성을 분석하고 환경오염물질의 저감효율을 비교 분석하였다. 그 결과, 카트리지형 활성탄 흡착탑에 사용되는 활성탄은 요오드흡착력 800 mg g^-1 이상의 양질의 활성탄으로 확인되었으며 교체주기내에서 양호한 수준으로 활성탄 흡착성능이 유지되는 것으로 확인되었다. 환경오염물질 저검효율 분석결과 카트리지형 활성탄 흡착탑의 경우 THC (Total Hydrocarbon), toluene 및 MEK (Methylethylketone) 성분의 처리효율이 각각 71%, 77% 및 80%로 좋은 처리효율을 보인 것으로 확인되었다. 일반형 활성탄 흡착탑은 처리효율이 매우 낮아 배출오염물질을 처리하는 방지시설로서의 역할을 제대로 하지 못하고 있었다. 일반형 활성탄 흡착탑을 카트리지형 활성탄 흡착탑으로 개선하여 운영 시 배출오염물질을 저감시킬 수 있을 것으로 판단된다.

• 분석과학
• /
• 제19권5호
• /
• pp.376-382
• /
• 2006

In this work, pitch/activated carbon/$TiO_2$ composite were prepared by $CCl_4$ solvent method with different mixing ratios. The BET surface area of pitch/activated carbon/$TiO_2$ composite has a significantly increase with increasing activated carbon content in pitch/activated carbon/$TiO_2$ composite. The surface structure and elemental compositions of the composite were studied by SEM and EDX, respectively. The SEM results were presented to the characterization of porous texture on the pitch/activated carbon/$TiO_2$ composite. And EDX data was shown the presence of C, O, S, Ti and other elements. The structural properties of the composite were studied in XRD measurements. The $TiO_2$ crystal phases of the pitch/activated carbon/$TiO_2$ composite had lots of rutile-type structure which transforms from anatase-type with a little of anatase-type structure. The photocatalytic activities of the composite were evaluated using a photo-decomposition method under UV lamp. The pitch/activated carbon/$TiO_2$ composites were observed better photocatalytic activity than that of pristine $TiO_2$.

• Carbon letters
• /
• 제15권3호
• /
• pp.192-197
• /
• 2014

A hierarchical pore structured novolac-type phenol based-activated carbon with micropores and mesopores was fabricated. Physical activation using a sacrificial silicon dioxide ($SiO_2$) template and chemical activation using potassium hydroxide (KOH) were employed to prepare these materials. The morphology of the well-developed pore structure was characterized using field-emission scanning electron microscopy. The novolac-type phenol-based activated carbon retained hierarchical pores (micropores and mesopores); it exhibited high Brunauer-Emmett-Teller specific surface areas and hierarchical pore size distributions. The hierarchical pore novolac-type phenol-based activated carbon was used as an electrode in electric double-layer capacitors, and the specific capacitance and the retained capacitance ratio were measured. The specific capacitances and the retained capacitance ratio were enhanced, depending on the $SiO_2$ concentration in the material. This result is attributed to the hierarchical pore structure of the novolac-type phenol-based activated carbon.

• 한국연초학회지
• /
• 제16권2호
• /
• pp.191-197
• /
• 1994

Relationships between surface structure and adsorption properties of smoke components were investigated in surface-modified and un-modified activated carbon filter cigarettes. Commercially available activated carbon was treated with nitric acid and hydrogen peroxide as oxidant, and their pore volume, surface structure, BET surface area, pore type and size were studied. BET surface area and pore volume were decreased by nitric acid treatment, but median pore diameter was 8.1 $\AA$, which showed better development of pore compared with that of un-modified activated carbon, 6.9 $\AA$. In case of hydrogen peroxide treatment, BET surface area and pore volume were increased. Their pore was found to be a slit type based on V-t plot analysis. Neutralization capacities for bases of different strength (NaHCO3, Na2CO3, NaOEt and NaOH) showed that the majority of the acidic surface groups are of weak acidity. Modification of the activated carbon surface led to a slight change in adsorption properties when analyzing the smoke of triple-filter cigarette with surface-modified activated carbon.

• 공업화학
• /
• 제27권1호
• /
• pp.62-67
• /
• 2016

본 연구에서는 정수슬러지를 원료로 사용하여 펠렛형 흡착제를 제조하고 질소흡착법, XRD, XRF 및 암모니아 승온탈착법 등을 사용하여 물리 화학적 특성을 분석하였다. 정수슬러지 유래 펠렛형 흡착제와 첨착활성탄의 암모니아 및 포름알데히드 기체의 흡착 성능을 비교하였다. 정수슬러지로부터 제조된 펠렛형 흡착제는 첨착활성탄보다 표면적과 기공부피는 훨씬 작지만 암모니아를 훨씬 더 많이 흡착할 수 있었다. 이는 정수슬러지로부터 제조된 펠렛형 흡착제 표면에 산점이 훨씬 더 많이 분포해 있어서 화학흡착에 의해 암모니아를 흡착하기 때문이다. 반면에, 산성가스인 포름알데히드 가스 흡착의 경우는 넓은 표면적과 발달된 기공으로 인하여 첨착활성탄의 흡착성능이 정수슬러지로부터 제조된 펠렛형 흡착제에 비해 훨씬 우수하였다.

• 대한환경공학회지
• /
• 제22권7호
• /
• pp.1319-1330
• /
• 2000

유기성폐슬러지를 염화아연과 황화칼륨으로 약품활성화하여 제조한 활성탄의 세공발달과 흡착특성을 연구하였다. 유기성폐슬러지로 제조한 탄소의 세공발달은 77K에서 질소흡착법을 이용하여 특성화하였다. 염화아연으로 약품활성화하여 제조한 $ZnCl_2$-활성탄은 활성화공정에 의해 미세공이 형성되었음을 지적해주는 BDDT 분류의 type I의 흡착특성을 보여주었다. 상용 분말활성탄과 $K_2S$-활성탄은 BDDT 분류의 type IV와 유사한 이력현상을 나타냈는데, 이것은 이들 활성탄에 중세공이 형성되었음을 말해준다. 이것은 $K_2S$-활성탄은 주로 중세공과 미세공으로 이루어졌으며, 거대세공의 발달은 미비하다는 것을 의미한다. 유기성폐슬러지로 제조한 $K_2S$-활성탄의 중금속 흡착능은 상용입상활성탄보다 우수한 것으로 나타났다. $K_2S$-활성탄에 대한 중금속의 흡착은 단분자층 흡착을 나타내는 Langmuir와 Freundlich 등온식에 잘 부합되었다. $PO_4$-P에 대한 흡착능은 $K_2S$-활성탄이 $ZnCl_2$-활성탄보다 우수한 것으로 나타난 반면, $NO_3$-N의 흡착은 $ZnCl_2$-활성탄이 우수한 것으로 나타났다. 본 연구결과, 활성화제로 염화아연과 황화칼륨을 사용하여 유기성폐슬러지를 약품처리할 경우, 탄화와 활성화공정을 거치는 2단계 공정을 통하여 상용입상활성탄보다 흡착능이 뛰어난 활성탄을 제조할 수 있었다.

• 임산에너지
• /
• 제21권2호
• /
• pp.17-24
• /
• 2002

소나무 수피로 부터 수증기 활성화 의하여 활성탄을 제조하였으며, 제조된 활성탄은 세공 구조 및 표면적에 대한 검토를 행하였다. 활성화를 위하여 3종류의 서로 다른 형태의 로(정치식 수직, 수평로 및 회전식 수평로)가 본 실험에 사용되었다. 정치식 수직 및 수평로를 이용하여 수피를 탄화시키고 이를 수증기 활성화시키면, 1,000 ㎡／g이상의 높은 비표면적을 얻기는 어려웠다. 분말상태의 시료를 사용하면 비표면적이 약간 향상되었지만, 여전히 정치식 로의 경우 높은 비표면적의 결과를 얻기는 어려웠다. 로타리식 수평로에서 수피를 수증기 활성화시키면, 시판 1급 활성탄과 유사한 1,000 ㎡／g 이상의 비표면적을 나타내는 활성탄을 제조할 수 있었다. 로타리식 수평로에서 제조된 활성탄은 미세공에서 중세공까지 다양한 공극 분포를 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제25권8호
• /
• pp.1189-1194
• /
• 2004

The adsorption isotherms of N2 onto the metallic silver treated activated carbon fiber samples after acid treatment are Type I with a small amount of capillary condensation hysteresis. Increasing amount of acid treatment leads to a decrease in SBETs and external surface area. But, micropore volume and average pore diameter are presented in constant regular values with increasing amount of sulfuric acid treatment. SEM observes the surface morphology and crystal grown state of metal on the fiber surface. The results of EDX of Ag-activated carbon fiber pre-treated with acid show the spectra corresponding to almost all samples rich in silver with increasing the amount of acid treated. The FT-IR spectra of Ag-activated carbon fiber show that the acid pre-treatment is consequently associated with the homogeneous dispersion of metal with the increased surface acidity of the activated carbon fiber. The type and quality of oxygen groups are determined with Boehm titration method. From the those results, a positive influence of the acidic groups on the carbon fiber surface by acid treatment is also demonstrated by an increase in the contents of metallic silver with increasing of acidic groups.

• 한국환경과학회지
• /
• 제9권4호
• /
• pp.339-343
• /
• 2000

Activated carbons were prepared from Youngwall coal by steam activation in this study. The feasibility of the Youngwall coal to commercial activated carbon was examined. The variation of pore structures and the development of porosity in activated carbons were investigated by changing activation conditions in batch type apparatus. The values of BET surface area and adsorption capacity of iodine and methylene blue of the resulting activated carbons were obtained as high as 1,000$m^2$m^2$$/g, 900mg/g, 150$m\ell$/g, respectively. Youngwall activated carbon prepared in this study showed much higher pore volume in pore diameter over 10 than that of commercial reference activated carbon(Ningxia Taihua ZJ-15C) produced from China anthracite.

• Carbon letters
• /
• 제4권2호
• /
• pp.57-63
• /
• 2003

In polymer precursor based activated carbon, the structure of starting material is likely to have profound effect on the surface properties of end product. To investigate this aspect phenolic resins of different types were prepared using phenol, mcresol and formaldehyde as reactants and $Et_3N$ and $NH_4OH$ as catalyst. Out of these resins two resol resins PFR1 and CFR1 (prepared in excess of formaldehyde using $Et_3N$ as catalyst in the basic pH range) were used as raw materials for the preparation of activated carbons by both chemical and physical activation methods. In chemical activation process both the resins gave activated carbons with high surface areas i.e. 2384 and 2895 $m^2/g$, but pore size distribution in PFR1 resin calculated from Horvath-Kawazoe method, contributes mainly in micropore range i.e. 84.1~88.7 volume percent of pores was covered by micropores. Whereas CFR1 resin when activated with KOH for 2h time, a considerable amount (32.8%) of mesopores was introduced in activated carbon prepared. Physical activation with $CO_2$ leads to the formation of activated carbon with a wide range of surface area (503~1119 $m^2/g$) with both of these resins. The maximum pore volume percentage was obtained in 3-20 ${\AA}$ region by physical activation method.