• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.160-161
• /
• 2021

To prepare polyurethane coatings for top coatings of automobiles, acrylic resins containing 75% of solids were synthesized by a radical polymerization. The viscosity of the acrylic resins was increased with increasing OH values. Crosslinked acrylic-urethane clear coatings were obtained by curing reaction between the synthesized acrylic resins and hexamethylene diisocyanate(HDI) trimer(Desmodur N-3600). The physical properties from the following studies were carried out : viscosity(Zahn cup #2), adhesion, pensil hardness, and 60° specular gloss. Various properties of the acrylic-urethane clear coatings as top coatings of mobile coat were evaluated on the coating specimens. Adhesion property to a substrate, 60° specular gloss, and pencil hardness of prepared paint showed quite good properties.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.162-163
• /
• 2021

To prepare the waterborne silicone acrylic resin coatings, acrylic resin was prepared by a radical polymerization. Glass transition temperature(Tg) of the acrylic copolymer was fixed at 30℃ and the contents of tertiary amine monomer(DMAEMA), were varied to be 5, 10, 15 and 20 wt%, hydroxyl monomer, and carboxyl monomer were fixed 10 wt%, and 4 wt% respectively. γ-Glycidoxypropyltrimethoxysilane(GPTMS) containing epoxy group was used for curing agents. The eqivalent ratio of amine to epoxy was 1:1. The prepared coatings exhibited excellent adhesion to various substrates, and various physical properties of the coatings were satisfactory. The gloss retension and color difference were improved at low tertiary amine concentration. The coatings containing 10wt% tertiary amine concentration have especially good weather resistant properties.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.164-165
• /
• 2021

To prepare the good-adherent and weather-resistant acrylic resin coatings, acrylic resin was prepared by a radical polymerization. Glass transition temperature(Tg) of the acrylic copolymer was fixed at 30℃ and the contents of tertiary amine monomer(DMAEMA) was varied to be 5, 10, 15, 20 wt% respectively. γ-Glycidoxypropyltrimethoxysilane(GPTMS) containing epoxy group was used for curing agents and di-n-butyltindilaurate(DBTDL) was used for drying accelerator. The equivalent ratio of amine to epoxy was 1:1. The prepared coatings exhibited excellent adhesion to various substrates, and various physical properties of the coatings were satisfactory. The gloss retention and color difference were improved at low tertiary amine concentration. The coatings containing 10wt% tertiary amine concentration have especially good weather resistant properties.

• 정보학연구
• /
• 제7권1호
• /
• pp.105-110
• /
• 2004

본 연구에서는 수성페인트의 주원료인 안료와 전색재료인 아크릴계수지를 사용하여 수성페인트를 제조한 후 기초물성을 측정하고, 아크릴계 수성페인트에 환경친화적인 honey flavor 향료를 첨가시켜 도막을 형성시킨 후 관능검사 및 향의 지속성 여부를 조사하였다.

• 한국응용과학기술학회지
• /
• 제24권4호
• /
• pp.399-409
• /
• 2007

Characteristics of polyaniline anti-corrosive coatings with various primer coating resins(epoxy resin, urethane resin, and others) and top coating resins(epoxy and acrylic urethane resins) were investigated through adhesion, acid resistance, alkaline resistance, water resistance, and anti-corrosion tests. As a result, the anti-corrosive properties of the prepared coatings using polyaniline varied with the types of primer and top coating resins. In this condition, the properties of adhesion, chemical resistance, and water resistance were found to be very satisfactory when using emeraldine base (EB) of polyaniline blended with single-packaged urethane and acrylic urethane resins as the primer coatings, and using acrylic urethane resin as the top coatings. Also, the anti-corrosive function of these anti-corrosive coatings was well preserved for 1000 hr in the salt spray experiment.

• 한국응용과학기술학회지
• /
• 제24권3호
• /
• pp.253-263
• /
• 2007

Three different weather-resistant coatings were fabricated with the various weight ratios of a mill-base silicone/acrylic resin to let-down silicone /acrylic resin at 2:8, 3:7, and 4:6 respectively. The prepared coatings were tested to investigate the effect of composition of weather-resistant coatings on the physical properties. The thermal stability, salt spray exposure, and weather-resistance were improved with the increased silicone content. It was concluded that the optimum retio of mill-base silicone/acrylic resin to let-down silicone/acrylic resin would be 2:8 and the coating with 30 wt% of silicone content would have high weather-resistance.

• 폴리머
• /
• 제26권5호
• /
• pp.615-622
• /
• 2002

전보에서 합성된 안료분산용 및 희석용 실리콘/아크릴수지의 배합비를 중량비율 4 : 6, 3 : 7 및 2 : 8로 다양화하여 내후성 도료를 제조하였다. 제조된 내후성 도료로써 내후성에 속하는 각종 도막물성 시험을 행한 결과 실리콘 성분함량이 증가할수록 열적 안정성, 도막의 일반물성 및 내후성 등이 전반적으로 향상되는 결과를 보여주었으며, 3종류의 수지 배합비 중 2 : 8의 배합비가 적정선임을 알았다. 또한 실리콘 성분 30 wt% 함유한 도료는 고내후성 도료로서 거동함이 밝혀졌다

• 폴리머
• /
• 제28권3호
• /
• pp.273-280
• /
• 2004

고형분 80%인 아크릴수지 (에틸 메타크릴레이트-2-히드록시프로필 메타크릴레이트-노르말부틸 아크릴레이트-아크릴산 : EHBC)를 합성한 후 이를 헥사메틸렌 디이소시아네이트-뷰렛 경화제로서 상온경화시켜 고 고형분 도료 (에틸 메타크릴레이트-2-히드록시프로필 메타크릴레이트-노르말부틸 아크릴레이트-아즈릴산/헥사메틸렌 디이소시아네이트-뷰렛 : EHBCN)를 제조하였다. 진동자법에 의한 점탄성 측정에서 제조된 도료인 EHBCN-4 (EHBC-4 정적 $T_{g}$ $0^{\circ}C$)와 EHBCN-7 (EHBC-7 : 정적 $T_{g}$ 3$0^{\circ}C$)의 경화시간은 6.2시간과 4.5시간으로, 또한 경화된 도막의 동적 $T_{g}$ 는 $14^{\circ}C$ 와 $39^{\circ}C$로 각각 나타났다. 도막 물성 중 접착력과 굴곡성은 카프로락톤 아크릴레이트 단량체 성분이 함유된 EHBCN쪽의 물성이 현저히 좋게 나타나, 카프로락톤 아크릴레이트 성분이 접착력과 굴곡성을 증진시켰음이 입증되었다.

• 폴리머
• /
• 제25권3호
• /
• pp.349-358
• /
• 2001

고내후성 시릴기를 함유하는 아크릴수지 도료를 제조할 목적으로, 먼저 아크릴수지를 단량체 n-butyl methacrylate, methyl methacrylate, n-butyl acrylate 및 3-methacryloxypropyl-trimethoxysilane (MPTS)을 사용하여 이들을 부가중합시켜 얻었다. 아크릴 공중합체의$T_g$를 $20^{\circ}C$로 조정하면서 MPTS 함량을 10, 20, 30wt%로 변화시켜 합성하였다. 아크릴수지 합성에서 실리콘 성분인 MPTS 양이 많아질수록 점성도가 저하되었으며, 고온에서의 열적 안정성은 향상되었다. 한편 합성된 아크릴수지를 백색안료와 블렌드하여 도료를 제조한 후 도막물성을 시험한 결과, 여러 가지 피도물에 대하여 우수한 접착력을 보였고 기타의 물성들도 대체로 좋게 나타났다. 내후성 시험은 옥외폭로시험, WOM 및 QUV의 3종류로 하였는데, 각종 측정 수치로 보아 MPTS 함량 30wt%인 아크릴수지 도료는 고내후성 도료임이 확인되었다.

• 한국응용과학기술학회지
• /
• 제28권3호
• /
• pp.359-366
• /
• 2011

In this study we experimented that how polyurethane effect to acrylic-polyurethane resin in Full-Grain leather coatings. First of all, we consummated waterborne acrylic emulsion and waterborne polyurethane resin, Than we prepared F.G leathers which were coated by acrylic resin and acrylic-polyurethane resins. According to measured data for solvent resistance, acrylic resin and acrylic-polyurethane resins had good property. Sample a(WAC) had most low strength($2.10kg_f/mm^2$) and sample d(WAC 93 : WPU 7) had most high strength($3.41kg_f/mm^2$). Also we knew that most good property of abrasion is d(47.4 mg). In elongation case, a(WAC) had most good result(645 %) in this experiment.