• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.175-181
• /
• 2009

The solution polymerization was conducted to synthesize pressure sensitive adhesive for polarizer film using acrylic monomers. 2-Ethylhexyl acrylate, butyl acrylate, acrylic acid were used as acrylic monomers, benzoyl peroxide as initiator, ethyl acetate as solvent. The ratio of monomers was 2-ethylhexyl acrylate: butyl acrylate: acrylic acid = 25:50:3.6 reflecting $-40^{\circ}C$ of glass transition temperature in the pressure sensitive adhesive. The amount of initiator was determined as 0.09% to monomer considering wetting power and initial tackiness. The ratio of monomer to solvent was determined as 1:1.7 considering wetting power and transmissivity. The transmissivity of pressure sensitive adhesive increased with decreasing both viscosity and molecular weight due to reducing of refractive index by low entanglement between molecules. In the measurement of pot life, it was found that the storage stability was good at 1:1.7 of monomer: solvent without large change of viscosity during 200 min.

• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.668-676
• /
• 2012

In this study, we modified silica nanoparticles with bis[3-(trimethoxysilyl)propyl]amine (BTMA) silane coupling agent to introduce secondary amino groups on the silica surface. After modification of silica, we investigated effects of different types of (meth)acrylate group containing monomers on the Michael addition reaction to introduce reactive (meth)acrylate groups on the BTMA modified silica surface. We used two kinds of (meth)acrylate monomers, trimethylolpropane ethoxylate triacrylate (TMPET) which has three identical acrylate groups, and 3-(acryloyloxy)-2-hydroxypropyl methacrylate (AHM) which has one acrylate and one methacrylate group. We used fourier transform infrared spectroscopy (FTIR), elemental analysis (EA) and solid state cross-polarization magic angle spinning (CP/MAS) nuclear magnetic resonance spectroscopy (NMR) to understand reactions between NH groups on the silica surface with (meth)acrylate groups of TMPET and AHM monomers. We found almost complete Michael addition reaction between all three acrylate groups of TMPET with NH groups on the BTMA modified silica. But, for the AHM treatment of BTMA modified silica, we found Michael addition reaction occurred only between acrylate groups of AHM and NH groups of silica surface, not between methacrylate groups of AHM and NH groups of BTMA modified silica surface.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.548-553
• /
• 2011

NCO terminated polyurethane prepolymers were synthesized from isophorone diisocyanate(IPDI), polycarbonate diol(PCD) and dimethylol propionic acid(DMPA). Subsequently, acrylic terminated polyurethanes were prepared by capping the NCO groups of polyurethane prepolymers with different types of acrylate monomers, such as 2-hydroxyethyl methacrylate(HEMA), 2-hydroxyethyl acrylate(HEA) and pentaerythritol triacrylate(PETA). The average particle sizes of the acrylic terminated polyurethane solutions were increased by capping acrylate monomers. Also, the prepared coating films showed better abrasion resistance and pencil hardness than those of pure waterborne polyurethanes. The coating film with PETA exhibited the best abrasion resistance and pencil hardness of coating films prepared with three acrylate monomers.

• Elastomers and Composites
• /
• v.57 no.2
• /
• pp.29-39
• /
• 2022

In this research, the relationships between the chemical structures of 10 different acrylate monomers with 3 different cross-linking monomers were evaluated. The thermal stabilities of the prepared copolymers were evaluated by their weight-loss percentage through thermogravimetric analysis, and their glass-transition temperatures were analyzed using differential scanning calorimetry. Based on the results, some relationships between the chemical structures of the monomers and their properties were derived and are discussed herein.

• Journal of Adhesion and Interface
• /
• v.10 no.1
• /
• pp.1-10
• /
• 2009

The waterborne acrylic pressure-sensitive adhesive in the basis of butylacylate (BA) and 2-Ethylhexylacrylate (2-EHA) was synthesized and the methyl methacrylate (MMA) have been used to give the rigidity perfroamce. The polymreric latex was synthesized using butyl acrylate (BA), 2-ethylhexyl acrylate (EHA), methyl methacrylate (MMA) and each 1, 2, 3% of various functional monomers. The dimethyl-2-imidazlidon acrylate and 2-acrylamido-2-methyl-1-propanesulfonate was used in order to increase the wetting properties of acrylic emulsion. To study of properties of functional monomer, The polymreric latex was synthesized various functional monomers each 1, 2, 3%. The 2-acrylamido-2-methyl-1-propanesulfonate showed the best properties. Latex with acrylic acid and dimethyl-2-imidazlidon acrylate had good peel strength, holding power, but it showed that they didn't separate from adhered cleanly by weak cohesion strength. The adhesion performance was increased by increasing amount of 2-acrylamido-2-methyl-1-propanesulfonate however latexes with upper 7% 2-acrylamido-2-methyl-1-propanesulfonate showed that the properties of PSA decreased.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1627-1634
• /
• 2020

In this study, water-based acrylic adhesives as copolymers with acrylic acid, 2-hydroxyethyl acrylate were synthesized using ethyl acrylate, 2-ethylhexyl acrylate, and lauryl methacrylate as the main monomers. Prepared water-based acrylic adhesive was compared to physical properties such as solid content, average particle size distribution, initial adhesive force, maximum adhesive force, peel strength, and heat resistance.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.451-458
• /
• 2014

Waterborne polyurethane dispersion (WPUD) was prepared from polycarbonate diol (PCD), isophorone diisocyanate (IPDI) and dimethylol propionic acid (DMPA) as starting materials. Then, waterborne acrylic polyurethane dispersion (AUD) was synthesized by reacting the WPUD with different types of acrylate monomers, such as methyl methacrylate (MMA), 2-hydroxyethyl methacrylate (HEMA) and butyl acrylate (BA). Subsequently, the AUD was mixed with multi-walled carbon nanotube (MWCNT) to yield a conductive coating solution, and the mixture was coated on the polycarbonate substrate. The pencil hardness, abrasion resistance and chemical resistance of the coating films from AUD were improved than those from WPUD, while the electrical conductivity of the coating films from AUD was decreased than that of WPUD. Also, the effect of acrylate types on the properties of coating films was investigated. The AUD obtained from HEMA showed the strongest pencil hardness, while the AUD obtained from MMA exhibited the strongest abrasion resistance, chemical resistance and electrical conductivity among several types of acrylate monomers.

• Elastomers and Composites
• /
• v.47 no.1
• /
• pp.75-81
• /
• 2012

Acrylic rubber was synthesized using ethyl acrylate. butyl acrylate, methoxyethyl acrylate as main monomers and glycidyl methacrylate as cure site monomer by emulsion polymerization. Rubber compound was made by adding 2,2-bis[4-(4-aminophenoxy)phenyl]propane as crosslinking agent. Increase of ethyl acrylate content in the main monomer ratio resulted in enhancement of heat resistance due to decrease of glass transition temperature in acrylic rubber. And also oil resistance was increased with increasing content of ethyl acrylate because ethyl acrylate has the highest ester concentration in the three main monomers. With content of 2,2-bis[4-(4-aminophenoxy)phenyl]propane, both tensile strength and elongation were increased until 2 phr, but in higher content than that, they decreased owing to reduction of viscosity and elongation by increase of crosslinking density.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.277-284
• /
• 2011

In this study, UV-curing type organic - inorganic hybrid hard coating solutions were prepared from alumina sols and acrylate monomers. The mixture of alumina sols, prepared from aluminum isopropoxide, and a silane coupling agent, methacryloxypropyl trimethoxysilane(MPTMS), was used as an inorganic component. Also, the mixture of acrylate monomers, pentaerythritol triacrylate(PETA), 1,6-hexanediol diacrylate(HDDA) and dipentaerythritol hexaacrylate (DPEHA), was used as an organic component. The organic-inorganic hybrid coating solutions were obtained by mixing the inorganic component and organic component, deposited on polycarbonate substrates by spin coating and densified by UV-curing. The effect of the amount of MPTMS in the inorganic component and the irradiation time during UV-curing was studied on the properties of coating films. As a result, when 0.20 mole of MPTMS was used, the pencil hardness of coated films showed an excellent pencil hardness of 3H and also exhibited a good abrasion resistance of 2% in haze.

• Journal of Adhesion and Interface
• /
• v.20 no.1
• /
• pp.15-22
• /
• 2019

In this study, polybutadiene based di-functional urethane acrylate oligomer (PB-UAO) were synthesized from polybutadiene diol and isophorone diisocyanate. And then, pressure sensitive adhesive films were prepared by mixing with synthesized oligomer, tri-functional acrylate monomer (Tris(2-acryloyloxyethyl) isocyanurate (TAOEIC) or Trimethylolpropane triacrylate (TMPTA) or Pentaerythritol triacrylate (PETA)), mono-functional acrylate monomer (Stearyl acrylate) and UV initiators. Effects of types and contents of trifunctional acrylate monomers on peel strength, tensile strength, elongation, thermal stability and water absorption property were studied. As the contents of tri-functional acrylate monomer increased, and as the molecular weight of tri-functional acrylate monomer decreased, peel strength, elongation and water absorption showed a tendency to decrease whereas tensile strength and thermal stability showed a tendency to increase.