• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.938-941
• /
• 2006

We present a new design method of one-dimensional multi-layered acoustic foams for transmission loss maximization by topology optimization. Multi-layered acoustic foam sequences consisting of acoustic air layers and poroelastic material layers are designed for target frequency values. For successful topology optimization design of multi-layered acoustic foams, the material interpolation concept of topology optimization is adopted. In doing so, an acoustic air layer is modeled as a limiting poroelastic material layer; acoustic air and poroelastic material are handled by a single set of governing equations based on Biot's theory. For efficient analysis of a specific multi-layered foam appearing during optimization, we do not solve the differential equations directly, but we use an efficient transfer matrix approach which can be derived from Biot's theory. Through some numerical case studies, the proposed design method for finding optimal multi-layer sequencing is validated.

• 설비공학논문집
• /
• 제12권5호
• /
• pp.448-456
• /
• 2000

For piping line systems associated with a double-acting reciprocating compressor, an analytical study has been made on the gas pulsation in piping lines and its effects on the compressor performance. The transfer matrix which relates mass flow rate to the gas pulsation downstream of the compressor valve can be obtained by an acoustic model for piping line systems which include snubber and after-cooler with the aid of four pole theory Since mass flow rate is affected by the pressure pulsation in the pressure plenum, while the latter being determined by the former, iteration in the calculation should be made for convergence. The gas pulsation in pipings is found to have an adverse effect on the compressor's performance, and the magnitude of the gas pulsation can be lowered by increasing snubber volume.

• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.51-56
• /
• 2017

This paper presents an approach of predicting the radiated noise due to the structural vibration by internal harmonic forces using the doubly asymptotic approximation (DAA). Acoustic transfer vector is derived from the Helmholtz integral equation and the fluid-structure interaction relation of DAA. Numerical results and analytical results of radiated noise for a cylindrical shell were compared and showed that they were consistent in most of frequencies and radiation directions, but showed errors in some radiated directions in the mid-frequency region. Despite these errors, the prediction method will be suitable for practical radiated noise prediction.

• 한국음향학회지
• /
• 제18권8호
• /
• pp.61-67
• /
• 1999

본 논문에서는 선형배열을 이용하여 음향을 측정하기 위한 새로운 빔형성 알고리듬을 제안한다. 제안 알고리듬은, FIR 필터 설계기법에 의해 가중상수 및 원하는 빔패턴을 설정하고 이를 초기치로 사용하여 원하는 빔패턴과의 오차가 최소가 되도록 가중상수를 최적화시킨다. 전 주파수에서의 지향지수 균일성 유지를 위해 옥타브대역을 부대역으로 세분하고 의사역행렬에 의해 전달행렬을 정방행렬화하여 각 부대역별로 최적화를 수행한다. 시뮬레이션 결과 제안 알고리듬이 선형배열에서 음향측정에 적합한 빔패턴 및 지향지수를 형성시켜 음향측정에 유용함을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.903-912
• /
• 2007

One of the crucial factors which determine the quality and the accuracy of SEA model is how subsystems are defined. Experimental SEA technique had been a unique way to divide entire systems accurately for mid-frequency range, until FEA based virtual FRF response technique, virtual SEA method presented. Virtaul SEA has been developed for predictive SEA tool in early design process. In this study, Modal analysis results from modified crash FE model is used for Statistical transfer matrix. Observation nodes on the cockpit are grouped by attractive substructuring method based on point to point transfer and correlation matrix. Complex cockpit structure is divided into subsystems by automatic substructuring. Comparison with experimental SEA results validates the application of Virtual SEA to cockpit.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.646-650
• /
• 2001

In this paper, it is presented that the effect of air gap insertion in testing the transmission loss of sound barrier using structural vibration system. In this study, we use the APAMAT based on the structure-borne-noise. The measured results show that air gap insertion improves transmission loss as results of test based on the air-borne-noise. The measured results are compared with the predicted transmission loss using the transfer matrix method. The predicted results were found to be in reasonable agreement with measured results.

• 설비공학논문집
• /
• 제26권2호
• /
• pp.91-96
• /
• 2014

An acoustical model for detecting the leak location in a buried gas pipeline has been developed. This model is divided into an experimental model for sound diagnosis, and a theoretical model for sound prediction, which is based on the transfer matrix method, representing the sound pressure and the volume velocity as state variables. The power spectrum is measured by attaching only one microphone to the closed end pipe. It has been shown that the response magnitude of acoustic pressure signals calculated by the acoustical model depends upon the thickness and diameter of a pinhole. The validity for the acoustical model has been verified through a comparison between the measured and calculated results.

• 한국음향학회지
• /
• 제11권2호
• /
• pp.59-67
• /
• 1992

기계구조물로부터 발생하는 소음을 부가적인 음을 발생하여 능동적으로 제어하는 문제는 오늘날 환경보전의 측면에서 중요한 여구과제가 되고 있다. 길이가 긴 무한덕트에 대한 능동소음제어에 대해 적응필터링 방법을 이용하여 많은 연구가 진행되고 있다. 반면 실제 기계구조물에 있어서 크기의 한계로 인해 덕트의 길이가 짧은 경우가 많으여 이 경우 덕트 내부의 반사나 공명과 같은 음향특성을 고려해 볼 필요가 있다. 본 논문에서는 길이가 짧은 덕트에 대해 전달매트릭스법을 이용하여 음향계의 모델링을 하고 이것으로부터 구한 제어계의 전달함수를 유한한 FIR필터로 구현하여 능동적으로 소음을 제어하는 문제를 검토하였다. 수치적계산에 의한 음향계 모델링방법으로써 최적한 FIR필터의 계수를 구하여 이를 제어계의 모델로 설정하는 방법을 제안하였으며 제어시 실제계에서 방생할 수 있는 음향계 내부의 공명과 제어계의 안정성 및 제어효과를 예측하는 방법을 제사하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.290-298
• /
• 2019

The sound absorption coefficient and transmission loss of several types of rice hull mats with varying apparent densities and thicknesses are estimated in this paper using the transfer function and matrix methods, respectively, to evaluate the possibility of using rice hull as an acoustic construction material. The mean sound absorption rates of 10-cm-thick rice hull mats with target densities of $0.10g/cm^3$, $0.12g/cm^3$, and $0.14g/cm^3$ were 0.91, 0.92, and 0.95, respectively, while those of the 1-cm-thick plywood attached to the back of the rice hulls were 0.90, 0.92, and 0.92, respectively. The means of the sound transmission loss of the 10 cm-thick rice hull mats with the target densities of $0.10g/cm^3$, $0.12g/cm^3$, and $0.14g/cm^3$ were 7.66 dB, 10.49 dB, and 14.14 dB, respectively, while those of the 1 cm-thick plywood attached to the back of the rice hulls were 33.34 dB, 36.72 dB, and 38.95 dB, respectively. In conclusion, a rice hull mat could be used as acoustic construction materials because of its high sound absorption coefficient and sound transmission loss.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1018-1021
• /
• 2007

This paper explores the use of BEM based NAH to reconstruct the surface vibration of a plate in a rectangular finite cavity, in which the distances between sensors and the nearest points on the source surface are not equal. In such circumstances, different degree of information on propagating and non-propagating wave components will be detected by sensors at different positions, as well as the influence of measurement noise will vary significantly from the nearest points of measurement to the farthest ones. On the other hand, the condition number of the vibro-acoustic transfer function matrix relating normal surface velocities and field pressures will becomes high, numerically indicating an increase of linear dependency between rows of transfer function matrix. The combination of poor measurement and high condition number will result inaccurate reconstruction. Therefore, one approach to be investigated in this work is to select the measurement positions in such ways that reduce measurement redundancy, as it indicated by the condition number. The improvement is found to be significant in the numerical simulations utilizing two different criterions, spanning from over-determined to under-determined cases, and in the validation experiment.