• Speech Sciences
• /
• v.12 no.1
• /
• pp.27-35
• /
• 2005

Differential instrumentation for the diagnoses of individuals with Cleft palate has been used to objectively measure speech problems. The Cepstrum Method was used to study the vocal tract transfer function. The vocal tract transfer function and the source spectrum should be considered in the evaluation of nasal resonance. The aim of this study was to collect quantitative data on the acoustic Instrumentation used for evaluating hypernasality. Normal subjects (9 male, 21 female; 37 male children, 20 female children) and individuals with VPI (13 male, 8 female; 16 male children, 9 female) participated in this study. The vowel /i/ was selected to gauge the severances of hypernasality Spectral and Cepstral studies using CSL was used to identify the acoustic characteristics. Cepstrum analysis shows significant differences in quefrency and amplitude. The quefrency of normal groups was shorter than that of the VPI groups, while the amplitude of normal groups was lower than that of the VPI groups. This may have significance in the evaluation 'of nasal resonance.

• Speech Sciences
• /
• v.6
• /
• pp.45-54
• /
• 1999

The well-known tendency to delete the labiovelar glide /w/ in some special conditions in Korean was based on perceptual judgment. Among the studies which tried to identify this phenomenon, Silva(1991) and Kang(1997) discovered the important factors of /w/-deletion and tried to give phonological explanations in terms of the Obligatory Contour Principle (McCarthy 1986). This study uses acoustic experiments in order to examine the reality of this phenomenon and tries to explain it on the basis of spectrographic analysis. According to the experiment, it is observed that /w/ is neutralized rather than completely deleted. Therefore, this observation suggests that this phenomena be considered as the /w/-neutralization in the view of acoustic study, instead of the /w/-deletion.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.8 s.173
• /
• pp.182-191
• /
• 2005

It is very important to obtain a high quality of bone image for an accurate ultrasonic measurement of bone mineral density. In this study, we suggested a technique to acquire an optimal image by adapting an acoustic lens and a properly selected ultrasonic probe. Also, we have applied an image processing algorithm with which automatically makes a decision of brightness and contrast of image by generating threshold level, a composition of ultrasonic data, an elimination of noise using modified median filter, and a real time interpolation. We could confirm much improved resolution of bone image with acoustic lens attached to the ultrasonic probe and with the image processing algorithm suggested in this study. Therefore, it became possible to precisely diagnose the osteoprosis using ultrasonic imaging technique.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.542-546
• /
• 2003

This paper describes the machining characteristics of a developed micro grooving machine. Experiments have been conducted on the various grooving condition such as spindle revolution speed, feed rates and depth of groove. V and U-shaped blade tool and STD11 workpiece was used in this study. Evaluating the machining conditions, RMS and frequency spectrum analysis of AE(acoustic emission) signals according to each conditions were applied. As a result, this study presented the process to optimize micro grooving condition and possibility of application of AE technique in groove machining.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.3
• /
• pp.15-21
• /
• 1996

This study is focused on the prediction of appropriate tool life by clarifying the correlation between progressive tool wear and AE(Acoustic Emission) signals, while cutting stainless steel by end mill on the machining center. The results of this study were that RMSAE tends to increase linearly along with the increase of the cutting speed, and it was more sensitive to depth of cut than to the variation of feed rate at the same cutting conditions, and RMSAE increases around 0.21mm flank wear hereby AE-HIT also increases. AE signals depend upon tool wear and fracture from the above results. Therefore, the AE signals can be utilized in order to monitor the tool condition.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.6
• /
• pp.413-419
• /
• 2002

Noise barriers are widely used to reduce the sound level propagating from highways, railways or factories to residential areas. The reduced noise level at a receiver point is then determined by the diffracted waves around the edge of the barrier as well as by the transmitted waves through the barrier. 1'or proper usage, many studies either theoretical or experimental have been made with the objective of precisely Predicting the acoustic field and improving the noise attenuating properties of barriers. In this study. a simple scattering model. a line acoustic source scattered by an infinite cylinder, is introduced to simply Investigate the sound attenuation efficiency of a sound-resonating barrier. From this model study, it is observed that the sound-resonating harrier can be used as a good sound-shielding element especially for the pure-tone noise generated from the transformer. Large sound-attenuation is achieved by applying the sound-resonating barrier to the large transformers in a substation.

• Speech Sciences
• /
• v.10 no.3
• /
• pp.29-36
• /
• 2003

The purposes of this study was to conduct a correlational analysis among $F_^{0}$, Jitter, Shimmer, and NHR (HNR), and NNE estimated by three speech analysis softwares, MDVP, Praat and Dr. Speech. Thirty females and 15 males with normal voice participated in the study. We used Sound Forge 6.0 to record their voice. MDVP, Praat and Dr. Speech were used to measure the acoustic parameters. The Pearson correlation coefficient was determined through a statistical analysis. The results came out as follows: Firstly, there was a strong correlation between $F_^{0}$ and Shimmer of both instruments. However, there was no correlation between Jitter of both instruments. Secondly, Shimmer showed a stronger correlation with HNR, NHR, and NNE than Jitter. Therefore, Shimmer was considered to be more useful and sensitive parameter to identify dysphonic voice compared to jitter.

• Speech Sciences
• /
• v.10 no.3
• /
• pp.79-86
• /
• 2003

This study compared the voices of ministers and priests. There. has been a common notion that ministers is more passionate than priests in delivering their speech. Therefore, it can be assumed that ministers abuses or misuses his/her voice compared to priests. This study attempted acoustic analysis of the voices of 6 ministers and .5 priests before and after their speech. We measured F0, jitter, shimmer, NNE and HNR using Dr. Speech (Version 4.0, Tiger DRS). A t-test was performed to determine any objective differences of their voices. The results showed that there were no significant differences in the voices of ministers and priests before and after their speech. However, there seemed to be an interesting reversed tendency between ministers and priests, although it did not reach a statistical significance. That is, P0 tended to increase after the speech in ministers, whereas it tended to decrease in priests. In addition, HNR tended to decrease after the speech in priests, while it tended to increase in ministers.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.145-152
• /
• 2003

The objective of the present study is to develop methodology for the assesment of combustion stability of liquid rocket injectors. To simulate actual combustion occurring inside of a thrust chamber, a full-scale injector has been employed in the study, which burns gaseous oxygen and mixture of methane and propane. The main idea of the experiment is that the mixing mechanism is considered as a dominant factor significantly affecting combustion instability in a full-scale thrust chamber. Single & multi split triplet injectors have been used with an open-end cylindrical combustion chamber. The characteristics revealed by excited dynamic pressures in gaseous combustion show degrees of relative acoustic damping depending on operating conditions. Upon test results, the direct comparison between various types of injectors can be realized for the selection of the best design among prospective injectors.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.963-970
• /
• 2000

The turbo chiller uses centrifugal compressor, which operates at about 14,500 rpm. Due to the high rpm of the impeller, the noise of chiller males one of the serious problems. The possibility of the sound reduction by using absorbing material is studied in this paper. The generated sound propagates through the duct and then radiates to the outer field. So, the use of sound absorption material inside the duct is one of the effective methods. To study the effect of location of the material, we use Boundary Element Method to analyze the sound field inside the duct system. Numerical study shows the highest sound pressure region is near the elbow of curved duct. From the numerical study, it is also shown that appropriate use of sound absorbing material at this region makes 8dB reduction of the highest noise level.