• Journal of Sensor Science and Technology
• /
• v.18 no.5
• /
• pp.377-384
• /
• 2009

The ultrasonic hyperthermia for oncology has been developed and studied. The HIFU(high intensity focused ultrasound) is the most recent method to treat the tumor by using ultrasound. In this study, an insertion-type transducer for treating a prostate cancer, which can focus the ultrasonic beam mechanically and electrically, was designed and developed. The developed transducer was composed of three arrays, and each array has 32 elements. For the purpose of the mechanical focusing, both side arrays are slanted to the center array by $15^{\circ}$. With this structure, NFL(near field length) was set up as 30 mm. The PZT-4 and two matching layers were used, and the backing layer was excepted to prevent energy losses. The acoustic field analysis and the heating test were performed to evaluate the performance of developed transducer. The shape of an acoustic field, peak pressure, and acoustic pressure distribution were compared with numerical simulation. The NFL was 32 mm, the beam width was 5 mm, focal area was $40\;mm^2$, and peak pressure was 5.5 MPa. With heating by using developed transducer, the temperature increased up to $33^{\circ}C$ at focal zone. As a result of this study, the usefulness of suggested transducer for prostate cancer hyperthermia was confirmed by the acoustic field analysis and the heating test with TMM(tissue mimicking) phantom.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.205-211
• /
• 2003

Acoustic emission (AE) technique has been applied to not only mechanical property testing but also on-line monitoring of the el)tire structure or a limit zone only. Although several AE devices have already been developed for the on-line monitoring, the price of these systems is very high and it is difficult for the field to apply yet. In this study, wc developed a specially designed PC-based source location system using the A/D board. The source location technique is very important to identify the source, such as crack, leak detection. However, since the AE waveforms obtained from transducers are very difficult to distinguish the defect signals, therefore, it is necessary to consider the signal analyses of the transient waveform. Wavelet Transform (WT) is a powerful tool for processing transient signals with temporally varying spectra that helps to resolve high and low frequency transients components effectively In this study, the analyses of the AE signals are presented by employing the WT analyses. AE results are compared the PC-based source location system using A/D board with the commercial AE system.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.6
• /
• pp.712-722
• /
• 2019

Objective : Although magnetic resonance guided focused ultrasound (MRgFUS) has been used as minimally invasive and effective neurosurgical treatment, it exhibits some limitations, mainly related to acoustic properties of the skull barrier. This study was undertaken to identify skull characteristics that contribute to optimal ultrasonic energy transmission for MRgFUS procedures. Methods : For ex vivo skull experiments, various acoustic fields were measured under different conditions, using five non-embalmed cadaver skulls. For clinical skull analyses, brain computed tomography data of 46 patients who underwent MRgFUS ablations (18 unilateral thalamotomy, nine unilateral pallidotomy, and 19 bilateral capsulotomy) were retrospectively reviewed. Patients' skull factors and sonication parameters were comparatively analyzed with respect to the cadaveric skulls. Results : Skull experiments identified three important factors related skull penetration of ultrasound, including skull density ratio (SDR), skull volume, and incidence angle of the acoustic rays against the skull surface. In clinical results, SDR and skull volume correlated with maximal temperature (Tmax) and energy requirement to achieve Tmax (p<0.05). In addition, considering the incidence angle determined by brain target location, less energy was required to reach Tmax in the central, rather than lateral targets particularly when compared between thalamotomy and capsulotomy (p<0.05). Conclusion : This study reconfirmed previously identified skull factors, including SDR and skull volume, for successful MRgFUS; it identified an additional factor, incidence angle of acoustic rays against the skull surface. To guarantee successful transcranial MRgFUS treatment without suffering these various skull issues, further technical improvements are required.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.537-545
• /
• 2021

Due to the accelerated development and transformation of coastal waters by humans, damage to marine mammals is a concern. To understand how coastal development may affect marine mammals, it is essential to determine their distribution characteristics. In this study, the appearance of finless porpoises was confirmed by passive acoustic monitoring around the Southwest offshore wind farm in July, 2020. Although there were no visual observation results of finless porpoises in the research area, the clicks measured in the offshore wind farm were verified by comparing with acoustic characteristics of the clicks measured in the area with a high detection rate. During the experimental period, clicks of finless porpoises were recorded for ten consecutive days, and Clicks per Porpoise Positive Minute (CPPM) was 40.7 clicks min-1, Porpoise Positive Minutes (PPM) was 9.7 %, Encounter duration and waiting time were 18.2 min and 94.9 min respectively. This study provides information on the appearance of them in the Southwest offshore wind farm and this result may help to monitor the impact of marine mammals from wind farm operation.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.1E
• /
• pp.25-30
• /
• 2001

The unstable signature that is defined as frequency change with respect to the time or frequency modulation, is caused by the external loading variation in specific machinery component and Doppler shift etc. In this study, we analyze the generation mechanism of the unstable signature and apply the Extended Kalman filter (EKF) algorithm for its detection. The performance of Extended Kalman Filter is examined for numerical and measured signals and the results show its validity for unstable signature detection.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.387-390
• /
• 1997

Grinding process takes a long time that grinding machine is setted properly. It is difficult for user to judge correctly the abnormal states generated in grinding process. Air grinding has to be reduced for the improvement of productivity. In addition, it is important to monitor the dressing and the grinding process so that the grinding working maintains optimal grinding conditions. In this study, the monitoring system using the acoustic emission is developed to monitor these processes continuously. This system was able to reduce the preparation as well as the machine setting time in grinding operation.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.131-131
• /
• 2018

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04b
• /
• pp.677-682
• /
• 1998

Concrete is an inhomogeneous material consisting of larger aggregates and sand embedded in a cement paste matrix. In this study, an acoustic emission technique has been used to clarify the microscope failure mechanisms of concrete under three point bending test. AE source location has also been done to monitor the activities of internal damage and the progress of microscopic failure path during the loading. The relationship between AE characteristic and microscopic and microscopic failure mechanism is discussed.

• MALSORI
• /
• no.38
• /
• pp.25-39
• /
• 1999

Korean intonation has been investigated mainly from the point of view of impressionistic phonetics and phonology. The purpose of this paper is to investigate Korean intonation especially nuclear tones, from the point of view of experimental phonetics. Since what we hear is not always the always as what we see in fundamental frequency contours, acoustic characteristics of Korean nuclear times are first discussed Based m quantitative data similar nuclear times are compared and the relationship between the nuclear ton and sentence type is investigated The relationship between the nuclear tone and the speaker's attitude is also discussed.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1984.12a
• /
• pp.96-99
• /
• 1984

In this study, the underwater acoustic images were obtained by ultrasonicwave. The experiment was performed in the anechoic watertank, using a passive sonar array for one and two sound source respectively by X-Y scanning technique. The receiving array was consist of 8 disc type transducers with 1.5cm diameter at 25KHz resonance frequency. The scanned data were processed by the FORTRAN IV algorithm for the reconstruction of image, and the image had some noise due to the surface reflected waves. As the result, it was found that the acoustic imaging by electrical deflection and dynamic focusing technique is applicable to SONAR with the suppression of surface reflected wave.