• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.8
• /
• pp.532-538
• /
• 2015

In a reciprocating compressor, highly impulsive pressure fluctuations induced by a reciprocating piston give rise to serious noise and vibration problems. A muffler is frequently used to reduce this impulsive noise, but also has adverse effects on compressor performance due to additional pressure drop and heat transfer of refrigerants through it. Therefore, the flow and acoustic performances of mufflers used in a compressor should be considered simultaneously. In this study, both of flow and acoustic performances of mufflers are investigated using computational fluid dynamic techniques by solving full three-dimensional compressible Reynolds-Averaged Navier-Stokes equations. For validation purpose, the numerical method is initially applied to predict the transmission loss of a simple expansion muffler, and its predicted results show good agreements with theoretical and experimental results. Then, the flow and acoustic performances of an existing muffler is numerically investigated. On the basis of the analysis results, a new muffler is purposed and its performances are compared with the existing one. Improved performances of the new muffler are confirmed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.2
• /
• pp.272-278
• /
• 2015

The aim of this study is to find out the behavior and acoustic backscattering of the large jellyfish Nemopliema nomurai using hydroacoustics in situ. N. nomurai was distributed at depths ranging from 10~15 m during the day. Regarding the behavior of N. nomurai, there was no significant change in depth, and 3D tortuosity was not high. The vertical direction was ${\pm}10^{\circ}$ from the horizontal, and moving speed was $0.9{\sim}1.5\;m\;s^{-1}$. With regard to hydro-acoustical characteristics, the mean TS of N. nomurai ranged from -69.6~-56.0 dB at 38 kHz and -69.4~-54.5 dB at 120 kHz. TS variation (Max TS-Min TS) at 38 and 120 kHz was 0~10.2 dB and 0.2~16.0 dB, respectively. Mean TS and TS variation (Max TS-Min TS) of N. nomurai were higher at 120 kHz than at 38 kHz. The results showed that the use of hydroacoustics was effective in estimating the distribution depth, behavior, and acoustic characteristics of the target.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.3
• /
• pp.248-256
• /
• 2010

Acoustic side-aspect target strength (TS) of living Japanese anchovy (Engraulis japonicus) was measured at 120kHz during in situ experiments. The data were collected by lowering and horizontally projecting the splitbeam transducer into the anchovy school. For analysis and interpretation of the side-aspect TS data, acoustic theoretical model, based on the fish morphology, and dorsal-aspect TS data were used. Total length of the anchovy ranged from 6.6 to 12.8cm (mean length 9.3cm). The side-aspect TS distributed between -40 and -55dB, has an obvious length dependency. The mean side-aspect TS of the anchovy was -47.8dB, and the TS was about 2dB higher than mean TS generated from dorsal-aspect measurements. With reference to maximum TS, the results of the side-aspect TS were distributed within the range of the theoretical and dorsal-aspect TS. Apparently these tendency indicates that side-aspect TS measured from the study is useful data. These in situ measurements of side-aspect TS can be applied to improve acoustic detection and estimates of the anchovy, and is necessary to measure with a various frequency and length for making enhance data.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.5
• /
• pp.566-570
• /
• 2018

This study determined the acoustic target strength (TS; dB) of black seabream Acanthopagrus schlegeli off the southern coast of Korea. For the ex-situ measurements, 200 kHz split beam transducers were used, and a Kirchhoff-ray mode (KRM) model acoustic model was used for the calculation. The fork length and total weight of the black seabream ranged from 6.4 to 30.8 cm and 6.4 to 683.8 g. respectively 200 kHz, the TS could beexpressed as a function of fork length as: $TS_{max}=20log_{10}(FL)-60.35(R=0.92)$ and $TS_{avg.}=20log_{10}(FL)-66.89(R=0.88)$. These TS results for black seabream can be used for estimating the biomass of fish in acoustic surveys in coastal areas.

• Phonetics and Speech Sciences
• /
• v.7 no.2
• /
• pp.55-62
• /
• 2015

It is widely accepted that Parkinson's disease(PD) is the most common cause of hypokinetic dysarthria, and its characteristics of 'short rushes of speech' have become more evident along with the severity of motor disorders. Speech alternate motion rates (AMRs) are particularly useful for observing not only rate abnormalities but also deviant speech. However, relatively little is known about the characteristics of 'short rushes of speech' in terms of AMRs of PD except for the perceptual characteristics. The purpose of this study was to examine which acoustic features of 'short rushes of speech' in terms of AMRs are a robust indicator of Parkinsonian speech. Numbers of syllabic repetitions (/pə/, /tə/, /kə/) in AMR tasks were analyzed through acoustic methods observing a spectrogram of the Computerized Speech Lab in 9 patients with PD. Acoustically, we found three characteristics of 'short rushes of speech': 1) Vocalized consonants without closure duration(VC) 76.3%; 2) No consonant segmentation(NC) 18.6%; 3) No vowel formant frequency(NV) 5.1%. Based on these results, 'short rushes of speech' may affect the failure to reach and maintain the phonatory targets. In order to best achieve the therapeutic goals, and to make the treatment most efficacious, it is important to incorporate training methods which are based on both phonation and articulation.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.3E
• /
• pp.90-98
• /
• 2005

Enhanced approach using computational and experimental method is proposed and performed to describe very well the behavior of loudspeaker than conventional method. Proposed procedure is composed of four parts. First, Thiele-Small parameters for test loudspeaker are identified by an electrical impedance method like as a delta mass method. Second part includes the processes to measure physical properties. Physical data like masses and thicknesses of loudspeaker's components are measured by an electrical precision scale and a digital vernier caliper. Third, the identified Thiele-Small parameters are proposed to be used as load boundary conditions for vibration analysis instead of electromagnetic circuit analysis to get a driving force upon bobbin part. Also, these parameters and physical data are used to modify physical properties required for computation to accommodate simulated sound pressure level with measured one for loudspeaker enclosure system. These data like as Young's modulus and thickness for a diaphragm are required for vibration analysis of loudspeaker but not measured accurately. Finally, it was investigated that simulated sound pressure level with full acoustic modeling including an acoustic port for test loudspeaker agreed with experimental result very well in the midrange frequency band(from 100 Hz to 2,000 Hz). In addition, several design parametric study is performed to grasp acoustical behaviors of loudspeaker system due to variations of diaphragm thicknesses and shapes of dust cap.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.2
• /
• pp.114-119
• /
• 2016

This paper dealt with the propagation characteristics of acoustic signal in insulation oil for the purpose of improving the reliability of AE (acoustic emission) method used for condition monitoring of oil-immersed transformers. A discharge source was placed in insulation oil and AE sensors ($f_c$ :140 kHz) were attached on the oil tank to study the changes of velocity and propagation path with the depth and distance. The average velocity was 1,436 m/s and the velocity decreased with the increase of depth from the oil surface to 430 mm. The propagation paths were classified into three sections by the shortest reflection path of the detected signal. The minimum distinguishable distance in each section was 70 mm. It was also verified that PD (partial discharge) with a magnitude over than 500 pC can be detected by the AE sensors.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.143-147
• /
• 2002

In this paper, we investigated the deposition condition of Bragg reflector formation that will be expected to play an important role in future FBAR device applications. The thin films were deposited using an RF/DC magnetron sputtering technique. The material characteristics such as deposition rates, grain structures and surface roughnesses of the deposited silicon dioxide (SiO$_2$) and tungsten (W) films were investigated for various deposition conditions. As a result, it was found that the deposition condition could significantly affect the material characteristics of the deposited films and also the optimization of the deposition process is essentially important to obtain the desirable Brags reflector structure consisted of high-quality in films.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.5
• /
• pp.345-350
• /
• 2003

Acoustic intensity is usually estimated by the cross-spectrum of acoustic pressure at two adjacent microphones. The cross-spectrum calculated by digital Fourier transform technique will unavoidably have leakage error since the period of signal will not be usually coincident with record length. Therefore, the acoustic intensity estimated by the conventional FFT analyzer will show distorted value. In this paper, the expression of the Fourier transformed data of a harmonic signal with a single frequency is formulated when there is leakage error. The method to eliminate the effect of leakage error from the contaminated data is also proposed. Some numerical examples show the validation of the proposed method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1989-1994
• /
• 2009

This study purposes are improvement of system (lamp & ballast) efficacy with and optical characteristics through the developed ceramic arc tube. The designed electronic ballast is substituted for conventional magnetic ballast. These electric signal and optical, thermal characteristics through the improving efficacy of lighting system compared with conventional magnetic ballast. properties of lamp by driving method is researching in ballast. Particularly, electronic ballasts, which improved against weakness of Magnetic Ballast, are researching and applying to control of ceramic metal-halide lamp. but One major limitation is the acoustic resonance problem in CMH lamps at high-frequency operation. In order to avoid acoustic resonance, driving frequency decided 21[kHz]. Before discharge in this paper. The PSpice simulation result obtained sufficient voltage gain and the ignition voltage obtained over 3[kV] at 75[kHz]. After discharge, driving voltage obtained approximately 90[Vrms] at 21[kHz].