• The Journal of the Acoustical Society of Korea
• /
• v.19 no.5
• /
• pp.3-8
• /
• 2000

In this paper, we studied design and implementation of a robust speech recognition system in noisy car environment. The reference pattern used in the system is DMS(Dynamic Multi-Section). Two separate acoustic models, which are selected automatically depending on the noisy car environment for the speech in a car moving at below 80km/h and over 80km/h are proposed. PLP(Perceptual Linear Predictive) of order 13 is used for the feature vector and OSDP (One-Stage Dynamic Programming) is used for decoding. The system also has the function of editing the phone-book for voice dialing. The system yields a recognition rate of 89.75% for male speakers in SI (speaker independent) mode in a car running on a cemented express way at over 80km/h with a vocabulary of 33 words. The system also yields a recognition rate of 92.29% for male speakers in SI mode in a car running on a paved express way at over 80km/h.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.6
• /
• pp.366-374
• /
• 2014

With the advent of submarine detection technology using low-frequency active sonar there is a call for a new submarine stealth device that can replace the existing passive anechoic tiles. Proposed in this study is a low-frequency echo reduction technique based on active impedance matching, which employs a tile projector designed to cover a wide area such as the surface of a ship. To judge the feasibility of the active impedance matching technique finite-element simulations of low-frequency echo reduction are performed. Based on the analysis, a tile projector is designed, fabricated, and tested in an acoustic tank for its low-frequency echo reduction performance.

• Journal of Veterinary Clinics
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2008

This study is conducted to compare ultrasonographs with plain radiographs in monitoring bone regeneration during reconstruction of critical sized radial defects in dogs. A 15 mm bony defect was taken on each of the eight dog's radius using an electrical saw and an external fixator was applied. The experimental groups were divided into non-treated group(group 1) and $Osteoset^{(R)}$-treated group(group 2). Each fracture site was evaluated using plain radiography and ultrasonography. Radiographic callus formation occurred after $11.50{\pm}1.12$ days in group 1 and $11.50{\pm}0.5$ days in group 2. Neovascularized flow signal could be seen $6.50{\pm}1.5$ days and the vascular signal disappeared after $45.00{\pm}6.16$ days after operation in group 1. Neovascularized flow signal was observed $6.75{\pm}1.78$ days and vascular signal disappeared $23.25{\pm}3.03$ days after surgery which was caused by acoustic shadowing in group 2. Early stages of regeneration were observed more clearly with color Doppler ultrasonography than with plain radiography. Also from the results it is concluded that color Doppler ultrasonography are useful in observing initial stages of bone repair.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.89-96
• /
• 2019

In this study, alarm sound generated as a priority alert system propagation through an elevator shaft in apartment buildings were simulated using room acoustic simulation software. The simulations were conducted on three kinds of elevator hall plan with a different number of elevators and placement. First, the elevator shaft without sound absorption material was simulated as a condition of the present. When the distance from the alarm sound generating floor became farther, alarm sound level was decreased. However, the alarm sound level three-floor distance was about 54 dB(A)~56 dB(A) which were louder than a background sound level of typical apartment buildings. Sound absorption material placement proposed by previous studies were simulated and the alarm sound levels were decreased about 12 dB~16 dB. These levels were similar or lower than the background level of apartment buildings. From these results, it can be concluded that placing sound absorption material on the surface of the elevator shaft wall can be one of the methods to control the alarm sound as regulated in NFSC.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.34.1-34.1
• /
• 2009

After SNIa and WMAP observations during the last decade, the discovery of the accelerated expansion of the universe is a major challenge to particle physics and cosmology. There are currently three candidates for the dark energy which results in this accelerated expansion: $\cdot$ a non-zero cosmological constant, $\cdot$ a dynamical cosmological constant (quintessence scalar field), $\cdot$ modifications of Einstein's theory of gravity. The scalar field model like quintessence is a simple model with time-dependent w, which is generally larger than -w1. Because the different w lead to a different expansion history of the universe, the geometrical measurements of cosmic expansion through observations of SNIa, CMB and baryon acoustic oscillations (BAO) can give us tight constraints on w. One of the interesting ways to study the scalar field dark-energy models is to investigate the coupling between the dark energy and the other matter fields. In fact, a number of models which realize the interaction between dark energy and dark matter, or even visible matter, have been proposed so far. Observations of the effects of these interactions will offer an unique opportunity to detect a cosmological scalar field. In this talk, after briefly reviewing the main idea of the three possible candidates for dark energy and their cosmological phenomena, we discuss the interactinng dark-energy model, paying particular attention to the interacting mechanism between dark energy with a hot dark matter (neutrinos). In this so-called mass-varying neutrino (MVN) model, we calculate explicitly the cosmic microwave background (CMB) radiation and large-scale structure (LSS) within cosmological perturbation theory. The evolution of the mass of neutrinos is determined by the quintessence scalar field, which is responsible for the cosmic acceleration today.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.281-286
• /
• 2004

The wear process of end mill is a so complicated process that a more reliable technique is required for the monitoring and controling the tool life and its performance. This research presents a new tool wear monitoring method based on the sound signal generated on the machining. The experiment carried out continuous-side-milling for using the high-speed steel end mill under wet condition. The sound pressure was measured at 0.5m from the cutting zone by a dynamic microphone, and was analyzed at frequency domain. The tooth passing frequency appears as a harmonics form, and end mill wear is related with the first harmonic. It can be concluded from the result that the tool wear is correlate with the intensity of the measured sound at tooth passing frequency estimation of end mill wear using sound is possible through frequency analysis at tooth passing frequency under the given circumstances.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.2
• /
• pp.375-388
• /
• 1996

It has widely known for speech problem in patients with malocclusion, but there have been insufficient studies on degrees of severity. Patients with openbite and Cl III malocclusion usually have speech problem. It has widely known that fricative /s/is pronunciated most abnormally in Cl III malocclusion than any other consonant. Therefore 20 children with anterior crossbite were selected for study groups and 40 children with normal anterior occlusion were selected for control group. 7 sounds such as / 사(sa), 서($s{\delta}$), 소(so), 수(su), 스($s{\omega}$), 시(si), 세(se) / were recorded, and the formants and formants ratios were measured by using Sensimetric Speech Station, which is speech analyzing program in IBM PC. The results were as follows : 1. In anterior crossbite group, F1 of all 7 sounds were significantly higher than normal anterior relationship group(p<0.05). 2. There were no significant difference in F2 between two groups except / 소(so), 수(su)/(p>0.05). 3. In anterior crossbite group, F2/F1 ratio of all 7 sounds were significantly smaller than normal anterior relationship group(p<0.05). 4. There were no significant difference in accordance with tongue position(p>0.05).

• Journal of the Korea Society for Simulation
• /
• v.29 no.2
• /
• pp.21-33
• /
• 2020

This study develops a simulator for determining the sonar sensor configuration of unmanned underwater vehicles (UUVs) based on a scenario, in order for UUVs to conduct an effective anti-submarine warfare (ASW). First, we analyze the missions and operational concepts of UUVs in the field of ASW, and then select a Hold-at-Risk scenario as the one with the highest priority. Next, for modeling the components of a simulator, the motion, acoustic characteristic, and environment condition of the platforms (UUV and target submarine) are specified. Especially, based on the beam pattern of each sonar configuration considered in this paper, the passive sonar equation is used to verify target detection, and we further estimate the azimuth and elevation of the target using amplitude and phase of the received signal, respectively. The simulation results show the performance tendency depending on the sonar sensor configurations of a UUV, and the simulator provides a high applicability under various scenarios.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.289-300
• /
• 2015

An important source of noise from railways is rolling noise caused by wheel and rail vibrations induced by acoustic roughness at the wheel-rail contact. In conventional approaches to predicting rail noise, the rail is regarded as placed in a free space so that the reflection from the ground is not included. However, in order to predict rail noise close to the rail, the effect of the ground should be contained in the analysis. In this study the rail noise reflected from the ground is investigated using the wavenumber domain finite element and boundary element methods. First, two rail models, one using rail attached to the rigid ground and one using rail located above rigid ground, are considered and examined to determine the rigid ground effect in terms of the radiation efficiency. From this analysis, it was found that the two models give considerably different results, so that the distance between the rail and the ground is an important factor. Second, an impedance condition was set for the ground and the effect of the ground impedance on the rail noise was evaluated for the two rail models.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.2
• /
• pp.99-108
• /
• 2004

This thesis deals a method to deliver more realistic sound by cancelling the cross-talk which is inherent to the 5.1 channel speaker system. The acoustical model for cross-talk cancellation is the free field model. This model minimizes distortion of sound. I used the bark scale sound quality compensation which based on psycho-acoustic. For the surround channels, band-limited sound quality compensation is performed in the frequency domain. I also performed the sound quality assessment test on the traditional 2 channel stereo and 5.1 channel system. This test is performed in the test chamber which satisfies the ITU-R specifications. I uses the IACC(Inter-Aural Cross-Correlation) to determine the preferences of the amateur and the golden ear experts to asses the trans-aural filter. According to the result from the proposed method, I got more the 38㏈ separation rates with the Dolby standard speaker array. The results on the diffusion by the subjective test with the experts shows 0.4 point increased then before.