• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.618-622
• /
• 2000

This paper describes the correlation between the interior noise and the trunk wall vibration. Using the vibro-acoustic reciprocity, effect of the trunk wall vibration on the compartment noise is investigated on a medium size car. In the low frequency range, vehicle interior noise is dominated by several acoustic modes of the passenger compartment and the vibration modes of the surrounding shell parts. Especially, vibration of the trunk wall radiates sound and it is transferred through holes on the package tray into the passenger compartment. This paper experimentally reveals that sound can be well produced at some particular vibration modes of the trunk lid and it strongly influences the compartment noise through package tray holes. Contributions of the trunk walls to the interior noise are estimated by measuring the acoustic-structural transfer function, based on the vibro-acoustical reciprocity theorem.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.101-105
• /
• 2008

A flexible structure submerged in acoustic fluid is affected by its surrounding fluid. In transient response of a submerged structure, the coupled effect between structures and surrounding fluid emerges as damping and added mass at early and late time, respectively. Therefore, the characteristics of submerged structure such as natural frequencies and damping coefficients are changed by its surrounding fluid. In this paper, the analytic modal equation of a spherical shell surrounded by water and air is dealt with. Through the example, the damping coefficients and natural frequencies of flexible structures are studied for various external acoustic fluid and structures.

• 한국해양학회지
• /
• v.28 no.4
• /
• pp.313-322
• /
• 1993

The Western south Sea of Korea can be divided into 4 acoustic facies (AF I-AF IV) according to the variations of acoustic characters. Typical acoustic characters revealed in high-resolution seismic profiles (3.5kHz) are prolonged, internal reflected, non-penetrated, and transparent types. These acoustic types probably controlled by bottom condition and sediment properties such as composition and compaction of sediments. Acoustic facies I is characterized by prolonged type which is produced by absorbing of acoustic signals on the coarse sediments including gravels and shell fragments and irregular bedforms. Acoustic facies II is characterized by internal reflected type which is probably produced by differential sediments compaction. Acoustic facies III is characterized by non-penetrated type caused by scattering of acoustic signals on the well sorted fine ad very fine sand sediments. Acoustic facies IV is characterized by transparent type with non-internal reflector in limited thickness. Acoustic types in high-resolution profiles provide important information not only about the stratigraphy of sub bottom but also abut the sedimentary processes in shallow sea.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1-5
• /
• 2007

A majority of piping vibration problems are induced by internal fluid pulsation; turbulent flow, vortex shedding at internal discontinuities, and pressure pulsation at equipment nozzles. The pulsation at the pressure sources resonates acoustically with the piping and the amplified pressure pulsation can generate shell mode vibration in the piping. Reheater attemperator piping supplies water from feedwater pump to reheater attemperator to control the boiler temperature. In normal operating condition, the high frequency shell mode vibration occurred in the piping with the high level of sound(105 ${\sim}$ 117 dB). The vibration sources are pressure pulsation in the pump nozzle and the frequencies are related to the blade passing frequencies. The objects of this paper are to analyze the cause of the high frequency vibration and to establish corrective actions.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.5
• /
• pp.437-443
• /
• 2012

In this paper, the hybrid method to identify the exciting forces and radiated noise generated from the reciprocating compressor was presented. In order to identify the exciting force, both the acceleration data measured at the compressor shell and numerical finite element model for the full set of compressor were used simultaneously. Applying the identified exciting forces to the numerical model, the velocity responses of all nodes at the shell were predicted. Finally the radiated noises from the vibrating shell were predicted by using the direct boundary element acoustic analysis. For precise numerical modeling, the stiffness of rubber mounts and body springs were identified experimentally from the natural frequencies measured by impact testing. The error of over-all sound pressure level between predicted noise and measured noise was about 2.9 dB.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.573-574
• /
• 2009

• Journal of Power System Engineering
• /
• v.3 no.2
• /
• pp.26-33
• /
• 1999

Pressure pulsation Inside the discharge and suction cavity of rotary and scroll compressor are often a major source of objectionable noise and vibration. The key factor of these noise and vibration is due to the cavity resonance. It is not only necessary to understanding the characteristics of pulsation in order to reduce the excitation force of gas to the cavity but also to verifying the phenomena of cavity resonance. For the purpose of these understandings, measurement and simulation of cavity resonance can lead to a better understandings how they occur and be very important to identify the ways to reduce the noise efficiently. In this paper, modeling of the cavity(internal acoustics inside the shell) is discussed and simulated using FEM. Results from the simulation are compared with those measurement in experiments. In describing of cavity mode by experiments, it is very important to specify the exact conditions under which they are measured. Finally, this paper shows the one example of reduced cavity resonance in the compressor.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.1032-1037
• /
• 2003

Although the holes on the shell case are very important fer the acoustic performance, it is difficult to solve the problem because the case includes thin bodies. Hence, in the past, only the method of trial and error, which depends on the engineer's intuition and experience, was available fur the design of holes. Many researchers have tried to solve the thin-body acoustic problems, since the conventional boundary element method (BEM ) using the Helmholtz integral equation fails to yield a reliable solution fer the numerical modelling of radiation anti scattering of sound from thin bodies. In the area of the analysis of thin-body acoustic problem, three approaches are generally used; the multi-domain BEM, the indirect variational BEM, and the normal derivative integral equation And there has been just a f9w study reported on the design optimization for the acoustic radiation problems by using only the conventional BEM. For the thin-body acoustics, however, no further study in the optimization fields has been reported. In this research, the normal derivative integral equation is adopted as an analysis formulation in the thin-body acoustics, and then used fur the optimization. The analytical approaches for the design of holes are proposed by using a topology optimization technique and a genetic algorithm. The proposed approaches are implemented and validated using numerical examples.

• Advances in nano research
• /
• v.16 no.6
• /
• pp.565-577
• /
• 2024

Vibration investigation of fluid-filled functionally graded cylindrical shells with ring supports is studied here. Shell motion equations are framed first order shell theory due to Sander. These equations are partial differential equations which are usually solved by approximate technique. Robust and efficient techniques are favored to get precise results. Employment of the Rayleigh-Ritz procedure gives birth to the shell frequency equation. Use of acoustic wave equation is done to incorporate the sound pressure produced in a fluid. Hankel's functions of second kind designate the fluid influence. Mathematically the integral form of the Langrange energy functional is converted into a set of three partial differential equations. A cylindrical shell is immersed in a fluid which is a non-viscous one. These shells are stiffened by rings in the tangential direction. For isotropic materials, the physical properties are same everywhere where the laminated and functionally graded materials, they vary from point to point. Here the shell material has been taken as functionally graded material. After these, ring supports are located at various positions along the axial direction round the shell circumferential direction. The influence of the ring supports is investigated at various positions. Effect of ring supports with empty and fluid-filled shell is presented using the Rayleigh - Ritz method with simply supported condition. The frequency behavior is investigated with empty and fluid-filled cylindrical shell with ring supports versus circumferential wave number and axial wave number. Also the variations have been plotted against the locations of ring supports for length-to-radius and height-to-radius ratio. Moreover, frequency pattern is found for the various position of ring supports for empty and fluid-filled cylindrical shell. The frequency first increases and gain maximum value in the midway of the shell length and then lowers down. It is found that due to inducting the fluid term frequency result down than that of empty cylinder. It is also exhibited that the effect of frequencies is investigated by varying the surfaces with stainless steel and nickel as a constituent material. To generate the fundamental natural frequencies and for better accuracy and effectiveness, the computer software MATLAB is used.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.4
• /
• pp.183-190
• /
• 2008

In this paper, radiation characteristics of the beating sound are analytically investigated on a slightly asymmetric cylindrical shell. The cylindrical shell isan efficient model to consider the beat characteristics of Korean bells. Slight asymmetry in Korean bells makes mode pair which has close frequency components and the interaction of each mode pair produces beating sound. Based on the analytical model, the radiated sound field is determined. Using the sound beat map, the beating sound vs. direction and distance is investigated. Finally, results of the theoretical method are compared with those of the boundary element method to verify the validity.