• Fisheries and Aquatic Sciences
• /
• v.14 no.3
• /
• pp.218-225
• /
• 2011

Dual frequency identification sonar (DIDSON) is an imaging sonar that has been used for numerous fisheries investigations in a diverse range of freshwater and marine environments. The main purpose of DIDSON is fish counting, fish sizing, and fish behavioral studies. DIDSON records video-quality data, so processing power for handling the vast amount of data with high speed is a priority. Therefore, a semiautomated analysis of DIDSON data for fish counting, sizing, and fish behavior in Echoview (fisheries acoustic data analysis software) was accomplished using testing data collected on the Rakaia River, New Zealand. Using this data, the methods and algorithms for background noise subtraction, image smoothing, target (fish) detection, and conversion to single targets were precisely illustrated. Verification by visualization identified the resulting targets. As a result, not only fish counts but also fish sizing information such as length, thickness, perimeter, compactness, and orientation were obtained. The alpha-beta fish tracking algorithm was employed to extract the speed, change in depth, and the distributed depth relating to fish behavior. Tail-beat pattern was depicted using the maximum intensity of all beams. This methodology can be used as a template and applied to data from BlueView two-dimensional imaging sonar.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.121-124
• /
• 2008

This paper presents experimental results of dynamic characteristics of fuel-rich gas generators. Pressure fluctuation measurements in the chamber and manifolds have been analyzed. Gas-generator-alone tests revealed stable combustion regardless of a chamber pressure but low-frequency combustion instabilities occurred for cases of turbine-manifold tests at chamber pressure conditions below 50 bar. The instabilities are considered as an axial resonant mode and acoustic intensity increases along with a chamber pressure.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.593-596
• /
• 2006

The environment-friendly building material, photocatalyst/scoria/loess concrete, was prepared using scoria and loess (which have merits as building materials) and photocatalyst (which has the functions to compose the environmental contaminants and of self cleaning). In order to apply this material as a building material, the compressive and flexible strengths, and water absorptivity (which have been set by Korea Industrial Standard) were measured. In order to know the environment-friendly characteristics of this material, several tests, such as, the tests of emissivity and emission power of far infrared ray and acoustic absorptivity, antibacterial test for Escherichia coli and Pseudomonas aeruginosa, antifungal test for mixed fungal strains, and deodorization test of ammonia were carried out. Moreover, the removal characteristics of NOx, and formaldehyde (HCHO) by photocatalyst/scoria/loess concrete were examined as the following different parameters: the removal characteristics of these contaminants with the substitution ratio and the kind of photocatalyst, light source, UV intensity of sunlight, relative humidity, intial NOx concentration.

• Journal of Forest and Environmental Science
• /
• v.32 no.1
• /
• pp.68-73
• /
• 2016

We investigated structure and intensity of 267 echolocation calls that were collected from the five Korean Myotis species (M. nettereri, M. petax, M. ikonnikovi, M. macrodactylus and M. formosus). All the Myotis species produced typical FM call pattern with similar echolocation call shapes and outer shapes, producing steep, downward frequency-modulated calls. A pulse has two harmonies, which consist of the first harmony with wider bandwidth and the second harmony with narrower bandwidth. The PF of the first harmony is higher than that of the second harmony. The typical FM call structure, with two harmonies and wide bandwidth, might be highly related to fast flying and wide screening in the dense forests. In classification of the echolocation calls by DFA, most of calls from the five species could be well correctly classified. All calls of M. nettereri (100% of 17 calls), M. formosus (95.5% of 22 calls) and M. ikonnikovi (85.7% of 70 calls) could be well discriminated from those of the other species, whereas calls of M. petax and M. macrodactylus could be discriminated by 70.4% of 98 calls and 76.7% of 60 calls, respectively. Our results indicate that the five Korean Myotis species can be well identified by the echolocation calls with high correct classification by DFA.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.9
• /
• pp.845-852
• /
• 2012

Recently, wireless power transfer technology is ready to be commercialized in consumer electronics. It draws attention from not only experts but also public because of its convenience and huge market. However, previous technologies such as magnetic resonance and induction coupling have limited applications because of its short transfer distance compared to device size and magnetic intensity limitation on the safety of body exposure. As an alternative, ultrasonic wireless power transfer technology is proposed. The ultrasonic wireless power transfer system is composed of transmitter which converts electrical energy to ultrasonic energy and receiver which converts the ultrasonic energy to the electrical energy again. This paper is focused on the development of high energy conversion efficiency of ultrasonic transmitter. Optimal transfer frequency is calculated based on the acoustic radiation and damping effect. The transmitter is designed through numerical analysis, and is manufactured to match the optimal transfer frequency with the size of 100 mm diameter, 12.2 mm thickness plate. The energy conversion efficiency of about 13.6 % at 2 m distance is obtained, experimentally. This result is quite high considered with the device size and the power transfering distance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.1
• /
• pp.81-91
• /
• 1994

Combustion noise involved with chemical heat release and turbulent process in turbopropulsion systems, gasturbine, industrial furnaces and internal engines is indeed noisy. The experimental study reported in this paper is made to identify a dominant combustion noise in jet flames. Gaseous propane and kerosene fuel have been used with air as the oxidizer in a different jet combustion systems. Combustion and aerodynamic noise are studied through far field sound pressure measurements in an anechoic chamber. And also mean temperature and velocities and turbulent intensities of both isothermal and reacting flow fields were measured. It is shown that axial mean velocity of reacting flow fields is higher about 1 to 3m/sec than that of cold flow in a gaseous combustor. As the gaseous fuel flow rate increases, the acoustic power increases. But the sound pressure level for the spray flame decreases with increasing equivalence ratio. The influence of temperature in the combustion fields due to chemical heat release has been observed to be a dominant noise source in the spray flame. The spectra of combustion noise in gaseous propane and kerosene jet flame show a predominantly low frequency and a broadband nature as compared with the noise characteristics in an isothermal air jet.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.58-66
• /
• 2002

Acousto-optical wavelength tunable optical filters in LiNbO$_3$ have been demonstrated using taperd directional weighted coupling acoustic waveguides and Ti double diffusion technique. Conversion efficiency in excess of 61%, 86% and sidelobe intensity of -14.29㏈, -14.99㏈ were measured at a wavelength of 1551.1nm RF frequency of 173.58MHz and RF power of 35㎽ for both TE and TM input polarizations, respectivelv. A spectral width of ~l.8nm and linear tuning late of 8.6nm/MHz were demonstrated. A 2.82$mutextrm{s}$ switching time has been measured. With two channels with 2.5nmseparation, channel cross-talk was lower than -l4㏈ for single wavelength filtering due to sidelobe.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.10 no.1
• /
• pp.50-57
• /
• 1999

A study to get the data of normal stop consonants production as preliminary study for cleft palate patients was performed. Normal Korean native 21 speakers were pronounced $VCV(V=/a/,C=/P/,/{P^1}/,/P^h/,/t/,/{t^1}/,/{t^h}/,/k/,/{k^1}/,/{k^h}/)$ syllables with natural speech rate and intensity. With intrapharyngeal pressure waveforms by pressure sensor in oropharyngeal cavity, amplitude and time duration of intrapharyngeal pressure were analyzed, and with acoustic waveforms and spectrograms, closure duration and VOT were analyzed. As results, the highest amplitude of intrapharyngeal pressure showed in alveolars and heavily aspirated consonants. Velars and unaspirated consonants were higher than bilabials and slightly aspirated ones each, in intrapharyngeal pressure. Bilabilas, alveolars and velars showed similar rise time of intrapharyngeal pressure build-up, but in decay time and total duration time, bilabials were slightly shorter than alveolars and velars, with no statistic significance. In the aspects of tensity, unaspirated consonants showed the longest rise time, heavily aspirated, the second, and slightly aspirated consonants, the shortest, which were also seen in decay time and total duration time. In closure duration, slightly aspirated consonants had the shortest closure duration, and the heavily aspirated ones, the second, and unaspirated consonants showed the longest. In VOT, heavily aspirated consonants showed the longest, slightly aspirated ones, the second and unaspirated ones showed the shortest.

• Proceedings of the KSPS conference
• /
• 1996.10a
• /
• pp.343-348
• /
• 1996

This paper examines the contribution of vocalic information (after the onset of voicing) to the perception of Korean alveolar stops: the aspirated /$t^{h}$/, the lenis /t/, and the fortis /$t^{*}$/. These stops have been analyzed as differing in VOT (Abramson & Lisker, 1964), the glottal width or aspiration (Kim, 1970), and F0 and intensity build-up (Han & Weitzman, 1970). These studies focused on the articulatory and acoustic qualities of the consonants and often assumed that the consonantal portion before the onset of voicing plays the main role in maintaining the three-way distinction. In contrast, the role of the following vowels was given less attention. In order to investigate the contribution of the following vowels, a perceptual study was conducted using stimuli cross-spliced from three naturally produced syllables [$t^{h}al$] 'mask', [tal] 'moon', and [$t^{*}al$]) 'daughter'. Stimuli were presented to 12 Korean listeners for identification. Each subject responded to a total of 486 tokens. The results show that vowels play the primary role when the cut occurs at the star of voicing. Even with cuts at 10 ms and 40 ms into voicing, the following vowel still plays a clear role. This suggests that vowels carry the important information for distinguishing the three stops.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.771-776
• /
• 2012

Recently, wireless power transfer technology is ready to be commercialized in consumer electronics. It draws attention of not only experts but also public because of its convenience and huge market. However, previous technologies such as magnetic resonance and induction coupling have limited applications because of its short transfer distance compared to device size and magnetic intensity limitation for the safety of body exposure. As an alternative, ultrasonic wireless power transfer technology is proposed. The ultrasonic wireless power transfer system is composed of transmitter which converts electrical energy to ultrasonic energy and receiver which converts the ultrasonic energy to the electrical energy again. This paper is focused on the development of high energy conversion efficiency of ultrasonic transmitter. Optimal transfer frequency is calculated based on the acoustic radiation and damping effect. The transmitter is designed through numerical analysis, and is manufactured to match the optimal transfer frequency with the size of 100mm diameter, 12.2 mm thickness plate. The energy conversion efficiency of about 13.6% at 2m distance is obtained, experimentally. This result is quite high considered with the device size and the power transfer distance.