• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.333.1-333
• /
• 2002

This paper suggests the noise reduction method of the engine cooling fan. It was estimated the fannoise contribution at the engine room and identified the noise source at the rotating fan by sound intensity method, first. And it has been developed the program for predicting the noise spectrum of axial flow fan. The radiated acoustic pressure is expressed the discrete frequency noise peaks at BPF and its harmonics and the line spectrum at the broad band by the noise generation mechanisms. In this paper it is shown that the comparison of the measuted and calculaed noise spectra of fn for the validation of the noise predictiong program. And this paper presents the characteristics of a fan noise due to modify the design parameters. Accordingly, it was obtained the design parameter values for noise reduction of fan.

• Proceedings of the KSPS conference
• /
• 2006.05a
• /
• pp.77-81
• /
• 2006

This paper presents a technique of imposing the prosodic features of a native speaker's utterance onto the same sentence uttered by a non-native speaker. Three acoustic aspects of the prosodic features were considered: the fundamental frequency (F0) contour, segmental durations, and the intensity contour. The fundamental frequency contour and the segmental durations of the native speaker's utterance were imposed on the non-native speaker's utterance by using the PSOLA (pitch-synchronous overlap and add) algorithm [1] implemented in Praat[2]. The intensity contour transfer was also done in Praat. The technique of transferring one or more of these prosodic features was elaborated and its implications in the area of language education were discussed.

• Journal of KSNVE
• /
• v.8 no.4
• /
• pp.706-714
• /
• 1998

The purpose of this study is to analyse the main factors and attributes of psychological evaluation to noise. For this purpose, a psycho-acustic experiment was conducted by using the method of rating scale. 52 subjects were participated in the experiment, 20 stimuli were presented to subjects in random order with 23 adjectives. As a result of factor analysis, it was found that the primary factors for evaluating the quality of noise subjectively are four factors of unpleasantness, intensity, irregularity, and sharpness. And, as a result of MDPREF(multi-dimensional analysis of preference data), it was found that the noise sources including the factors of unpleasantness, intensity, and irregularity are related to the sounds of hammering in construction field, car horn, road traffic, idling of car, and printing by computer printer, and the factor of sharpness are the sounds of car siren, claps of thunder, car horn, and snowstorm etc.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.304-309
• /
• 2005

This paper presents an electronic ballast using a step down converter, a low frequency inverter for high intensity short-arc discharge lamp. The proposed ballast is composed of a full-wave rectifier, a step down converter operated as a current source with power regulation and a low frequency inverter with external ignition circuit. The ignition circuit generates high voltage pulse of $3{\sim}5[kV]$ peak, 130[Hz] periodically. Moreover, it is able to reignite at regular intervals by protective circuit. As experimental results on the test, acoustic resonance phenomenon is eliminated by operating the low frequency square wave voltage and current. Lamp voltage, current and consumption power are measured 123.8[V], 8.1[A] and 1,002[W], respectively. It was confirmed that the designed ballast operate the lamp with a constant power.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.210-215
• /
• 2001

CD-ROM Drives Rotating high speed as 10000 rpm cause serious noise and vibration problems. At the high speed, dominant noise is Air Borne Noise produced from high-speed airflow and Structure Borne Noise produced from structural vibration. In this research, vibration and sound characteristics in CD-ROM Drive were studied by the use of experimental analysis and computational simulation. Sound intensity techniques and ODS(Operational Deflection Shape) techniques are applied to identify the acoustic noise source of CD-ROM drive. And Computational simulation using SYSNOISE is conducted for describing the noise behavior.

• MALSORI
• /
• no.60
• /
• pp.47-66
• /
• 2006

This study examined the effect of English-language experience on Korean- and Japanese-English late learners' production of English unstressed vowels in terms of four acoustic phonetic features: F0, duration, intensity and vowel reduction. The learners manifested some improvement with experience. The native-like attainment of a phonetic feature, however, was related to the phonological status of that feature in the speakers' native language. The results suggest that the extent to which the non-native speakers' production of English unstressed vowels improved with English-language experience varied as a function of their native language background.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1132-1137
• /
• 2001

The smart foam that is first proposed by Fuller(2) is not applicable to active noise control in a duct having flow. Thus. this paper presents the ring-type smart foam as an alternative. The ring-type smart foam consists of polyurethane acoustic foam of lining shape and PVDF film embedded along the mid-surface of the foam lining. A feedforward adaptive filtered-x LMS controller is used to minimize the signal from the error microphone. To enlarge quiet sound region. two error microphones are used to update system modeling filter (SIMO method). Sound intensity control using the ring-type smart foam is also discussed

• Analytical Science and Technology
• /
• v.24 no.6
• /
• pp.510-518
• /
• 2011

Recent developments and improvements of multiple technological elements including mass spectrometry (MS) instrument, multi-dimensional chromatographic separation, and software tools processing MS data resulted in benefits of large scale proteomics analysis. However, its throughput is limited by the speed and reproducibility of the protein digestion process. In this study, we demonstrated a new method for rapid proteolytic digestion of proteins using acoustic technology. Tryptic digests of BSA prepared at various conditions by super acoustic for optimization time and intensity were analyzed by LC-MS/MS showed higher sequence coverage in compared with traditional 16 hrs digestion method. The method was applied successfully for complex proteins of a breast cancer cells at 30 min of digestion at intensity 2. This new application reduces time-consuming of sample preparation with better efficiency, even with large amount of proteins, and increases high-throughput process in sample preparation state.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.473-478
• /
• 2009

The purpose of this study is to evaluate the behaviour of the plastic deformed zone at crack tip on the standard Charpy specimens which were taken from the multi-passed weld block of the pressure vessel steel. Notch was machined on the standard Charpy test specimens and pre-crack which was located around the fusion line was made under the repeat load. Four point bend and acoustic emission tests were carried out simultaneously. The size of plastic region at crack tip was calculated using stress intensity factor. Relationships between characteristics of acoustic emission and plastic zone size at crack tip were discussed through the cumulative AE energy. Regardless of the specimens, AE signals were absent within the elastic region almost and most of AE signals were produced at the plastic deformation region from yield point to the mid-point between yield and maximum load. More AE signals for the weldment were produced compared with the base-metal and PWHT specimen. Relations between plastic deformed zones at crack tip and cumulative AE energy for the weldment and PWHT specimen were different quietly from the base-metal. Besides, number of AE counts for the weldment was the larger than those of the base-metal and PWHT specimen.

• Phonetics and Speech Sciences
• /
• v.5 no.2
• /
• pp.3-10
• /
• 2013

The purpose of this study is to analyze the acoustic characteristics of Korean alveolar sibilant sounds of children with cerebral palsy by acoustic analysis. Thirteen children with spastic cerebral palsy aging from 6 to 10 years old, were selected by an articulation test, and compared with a control group of thirty children. The meaningless monosyllable CV, disyllable VCV(/asa/) and frame sentence including target syllables CV were measured. C was from the /s, s'/, and V was from the set /a, i, u, ${\varepsilon}$, o, ɯ, ʌ/. Multi-Speech was used for data recording and analysis. As a result, the frication duration of lenis-glottalized alveolar sibilant of children with cerebral palsy was significantly shorter than that of the control group in CV, VCV and frame sentence. The vowel duration in the following lenis-glottalized alveolar sibilant of children with cerebral palsy was significantly longer than that of the control group in CV, VCV and frame sentence. The children with cerebral palsy showed frequency and intensity of friction intervals which were significantly lower than in the control group in CV, VCV and frame sentence. In the comparison of the lenis-glottalized alveolar sibilant by the children with cerebral palsy group's phonation types, the frication duration showed a significant difference between the phonation types in CV, VCV and between the phonetic contexts. The glottalized-sibilant was longer than the lenis-sibilant in all the phonetic contexts. The subsequent vowel duration showed a significant difference between the phonation types in VCV and between the phonetic contexts(p<.05). The vowel duration in the following glottalized-sibilant was longer than the vowel duration in the following lenis-sibilant in all the phonetic contexts. In the frequency there was a significant difference between the phonation types in CV, and in the intensity there was a significant difference between the phonation type in CV and VCV. The children with spastic cerebral palsy had difficulty in articulating the alveolar sibilant due to poor control ability in laryngeal, respiration and articulatory movements which require fine motor coordination. This study quantitatively analyzes the acoustic parameters of the alveolar sibilant in various phonetic contexts. Therefore, the results are expected to help provide fundamental data for an intervention of articulation treatment for children with cerebral palsy.