• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.608-612
• /
• 2000

Active control of sound radiation(using active structural acoustic control) from a vibrating rectangular plate by a steady-state harmonic point force disturbance is experimentally studied. Control structural input are achieved by two piezoceramic actuators bonded to the surface of the panel. Two accelerometers are implemented as error sensors. Estimated radiated sound signals using vibro-acoustic path transfer function are used as error signals. The vibro-acoustic path transfer function represents system between accelerometers and microphones. The control approach are based on a multi-channel filtered-x LMS algorithm. The results demonstrate that attenuation of sound levels of 3dB, 13dB are achieved.

• Journal of Advanced Marine Engineering and Technology
• /
• 제11권1호
• /
• pp.63-71
• /
• 1987

The measuring of acoustic intensity has been investigated by many researchers and practicians during the last several decades. But due to the lack of measurement accuracy, they have had no practical use. In recent years, the two microphone acoustic intensity method has been developed by the advancement of FFT analysis technique and the digital data processing equipment. This new method of using two microphones gives informations on the noise source survey and the acoustic power of sound radiation source without the anechoic room. In this paper, theoretical formulae for the two microphone acoustic intensity method and the sound transmission loss are checked. The obtained results for the acoustical enclosure of gas heat pump were compared with the classical field incidence mass law. The surface vibration modes for a panel of enclosure were also estimated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.696-700
• /
• 2007

In case of dome-typed gymnastics training floor, since its form takes shape of the focus of sound, in the occasion when the finishing-material was used with the sandwich panel that prominent in reflexibility, and because the reverberation of sound in indoor is too loud, a smooth practice and teaching is very difficult. As this indoor gymnastics training floor, standing at its character, is required simultaneously the idea communication between the player and the coach, and the acoustic capability regarding to the clearness of music, besides the sport activity, the method to minimize the acoustic defect should be urgently contrived from the stages of design and beginning of construction. On this viewpoint, after investigation on the confidence of the surveyed value and the estimated value using acoustic simulation, and use of the changed finish-material, this thesis intends to design the dome-typed gymnastics training floor that secured the optimized acoustic condition. It is also considered that such result of the study could be utilized as the useful data that enables to improve the retrenchment effect of the construction cost as well as the acoustic performance, by means of the prediction control on the acoustic problem from the stage of design, for the occasion when the similar indoor sport gymnasium is planning to build for the near future.

• 한국음향학회지
• /
• 제38권6호
• /
• pp.678-686
• /
• 2019

수중에서는 다중 경로로 인한 인접 심볼 간 간섭의 영향으로 통신 성능이 저하되며, 수동형 시역전 처리는 다중 경로를 완화하기 위한 가장 효율적인 기법이다. 수동형 시역전 처리의 성능을 향상시키기 위해 다이버시티 결합기법이 이용되고 있으며, 본 논문에서는 여러 각도로의 빔 조향을 통해 획득한 신호들을 결합하는 빔 다이버시티 결합기법을 이용하여 통신 성능을 분석하였다. 수직 선 배열 센서에 수신된 탐침 신호로부터 추정한 빔-시간 그래프를 통해 음파의 전달 각도들을 추정하였으며, 추정된 각도 중 결합 개수 및 방식에 따른 통신 성능을 분석하였다. 분석을 위해 2018년 10월 포항 동방 해역에서 수행된 Biomimetic Long range Acoustic Communications 2018(BLAC18) 실험 데이터를 활용하였으며, 통신 성능 지표로써 출력 신호 대 잡음비를 이용하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.618-622
• /
• 2000

This paper describes the correlation between the interior noise and the trunk wall vibration. Using the vibro-acoustic reciprocity, effect of the trunk wall vibration on the compartment noise is investigated on a medium size car. In the low frequency range, vehicle interior noise is dominated by several acoustic modes of the passenger compartment and the vibration modes of the surrounding shell parts. Especially, vibration of the trunk wall radiates sound and it is transferred through holes on the package tray into the passenger compartment. This paper experimentally reveals that sound can be well produced at some particular vibration modes of the trunk lid and it strongly influences the compartment noise through package tray holes. Contributions of the trunk walls to the interior noise are estimated by measuring the acoustic-structural transfer function, based on the vibro-acoustical reciprocity theorem.

• 지구물리와물리탐사
• /
• 제2권4호
• /
• pp.202-208
• /
• 1999

Chirp sonar 시스템을 이용하여 획득한 광역주파수 음향반사자료의 감쇠특성을 나타내는 음향학적 분류변수를 고안하였다. 분류변수는 퇴적물 물성에 따른 분산효과에 의한 감쇠특성을 나타내며, 음향반사신호의 푸리에 변환을 이용한 unwrapped 위상의 미분치로부터 구하였다. 그리고 각기 다른 퇴적상을 나타내는 지점에서 획득된 음향반사신호의 지질음향모델링을 통하여 퇴적물 물성에 따른 감쇠특성을 평가하였다. 그 결과, 분류변수는 입자크기와 성분에 따른 퇴적물 형태와 해저면 굳기에 따라 값의 차이를 보였으며, 이는 음향자료로부터 직접 해저면을 분류하는데 효과적으로 사용할 수 있다.

• 수산해양기술연구
• /
• 제49권3호
• /
• pp.270-281
• /
• 2013

Hydro-acoustic surveys with scientific echo sounder were carried out to estimate the total density and distribution of the juvenile cod in Jinhae bay, Korea. The surveys were conducted 4 times from May to June using 2 frequency method (38kHz and 120kHz) and beam trawl were used to investigate the species composition. Also the catch amounts of juvenile cod were compared with the cod density estimated by the hydro-acoustic method. It was confirmed that the juvenile cod was stayed in Jinhae bay in early June and There was the relationship between catch of juvenile cod and the estimated density by hydro-acoustic survey. The number of juvenile cod was consequently about 365,000 fish (CV 12.9%) in May and 113,000 fish (CV 9.2%) in May based on the hydro-acoustic data.

• 산업기술연구
• /
• 제17권
• /
• pp.87-93
• /
• 1997

A Special purpose program, based on the dimensional analysis, was developed to estimate the wide band turbulent noise in the blower of vehicle airhandling system. Acoustic power level was measured at 4 rating points around the operating condition. The experiment was performed on the reference blower model using international standard chamber, which could measure acoustic power according to the air-handling performance. Analytical model of the blower noise was determined by the measured data. Using the analytical acoustic model, it was possible to estimated the effect by the change of the operating condition, such as flow rate, static pressure and wheel rotating speed, furthermore, the diameter and the width of blower.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1410-1415
• /
• 2001

Active control of sound radiation from a vibrating rectangular plate by a steady-state harmonic point force disturbance is experimentally studied. Structural excitation is achieved by two piezoceramic actuators mounted on the panel. Two accelerometers are implemented as error sensors. Estimated radiated sound signals using vibro-acoustic path transfer function are used as error signals. The vibro-acoustic path transfer function represents system between accelerometers and microphones. The approach is based on a multi-channel filtered-x LMS algorithm. The results shows that attenuation of sound levels of 11dB, 10dB is achieved.

• 소음진동
• /
• 제6권5호
• /
• pp.635-644
• /
• 1996

In this paper, Allard's modelling method which employs the method of acoustic transfer matrix(ATM) is applied to yield more precise results in the analysis of porous sound absorbing material. The method of ATM, based on Biot's theory, is known to play an important role in the estimation of the sound absorption when a sound projects onto the material. In the case of a single layered porous sound absorbing material, the surface impedance and the absorption coefficient by using the method of ATM are estimated. With the variation of the material properties, sound absorption characteristics and analyzed. Transmission Loss in a combination of the porous sound absorbing material with a thin plate is predicted.