• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.2
• /
• pp.115-124
• /
• 2020

Due to the increasing threats of submarines from North Korea and other countries, ROK Navy should improve the detection capability of submarines. There are two ways to detect submarines : acoustic detection and non-acoustic detection. Since the acoustic-detection way has limitations in spite of its usefulness, it should have the complementary way. The non-acoustic detection is the way to detect submarines which are operating mast sets such as periscopes and snorkels by non-acoustic sensors. So, this paper proposes a new submarine non-acoustic detection model using an ensemble of Convolutional Neural Network models in order to automate the non-acoustic detection. The proposed model is trained to classify targets as 4 classes which are submarines, flag buoys, lighted buoys, small boats. Based on the numerical study with 10,287 images, we confirm the proposed model can achieve 91.5 % test accuracy for the non-acoustic detection of submarines.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.1
• /
• pp.83-88
• /
• 2010

Acoustic telemetry is a useful method to investigate fish behavior and is widely used to obtain biological information. In this study, the detection ability of a mooring-type acoustic telemetry system and the seasonal changes were studied for survey design and data analysis. The system detection range was examined with an underwater noise model, and seasonal changes were estimated with a ray-tracing program and underwater temperature profile data. The field experiment was conducted with two sets of pingers and six receivers to estimate the difference in detection rate by installation depth and to compare the model estimate. Results indicated that the long-range detection ability of the acoustic telemetry system was significantly affected by underwater temperature. The detection rate rapidly decreased near the sea surface or bottom despite that the near-range Signal to noise ratio was sufficient.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.4
• /
• pp.98-103
• /
• 1986

The passive acoustic system only has generally used in fish detection. But the passive acoustic system has not been tried in fishing since Freytag has proposed a possibilities of the passive detection of fishes in 1963. This paper describes the .feasible aspects of fish detection by listening of the sound they make. The passive acoustic system accompanied the active acoustic system may expand the range of detection and compensate for lack of capabilities each other, but there are some difficulties in noise rejection because the fre9uency range of ship noises covers the whole range vf biological sounds. The attempt to collect useful informations from underwater would be greatly contributed in fisheries.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.5
• /
• pp.243-249
• /
• 2020

Event detection in wireless sensor networks is a key requirement in many applications. Acoustic sensors are one of the most frequently used sensors for event detection in sensor networks, but they are sensitive and difficult to handle because they vary greatly depending on the environment and target characteristics of the sensor field. In this paper, we propose a learning-based improvement of CFAR algorithm for increasing node-level event detection performance in acoustic sensor networks, and verify the effectiveness of the designed algorithm by comparing and evaluating the event detection performance with other algorithms. Our experimental results demonstrate the superiority of the proposed algorithm by increasing the detection accuracy by more than 45.16% by significantly reducing false positives by 7.97 times while slightly increasing the false negative compared to the existing algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.805-808
• /
• 2008

In this paper, it was performed the analysis on various intersection acoustic patterns for detection rate improvement of accident sound detection system : an acoustic pattern analysis on general traffic noise, an acoustic pattern analysis on engine noise, an acoustic pattern analysis on obstruct factors for accident sound detection system. There are remarkable differences between the acoustic patterns of traffic noise and accident sound, and we most consider the acoustic patterns when we compose the accident traffic detection system by acoustic because there is error range of 20[dB] according to the volume of traffic in intersection.

• MALSORI
• /
• no.66
• /
• pp.117-130
• /
• 2008

This paper presents a method for automatically detecting Korean prosodic boundaries using both acoustic and grammatical information for the performance improvement of speech information processing systems. While most of previous works are solely based on grammatical information, our method utilizes not only grammatical information constructed by a Maximum-Entropy-based grammar model using 10 grammatical features, but also acoustical information constructed by a GMM-based acoustic model using 14 acoustic features. Given that Korean prosodic structure has two intonationally defined prosodic units, intonation phrase (IP) and accentual phrase (AP), experimental results show that the detection rate of AP boundaries is 82.6%, which is higher than the labeler agreement rate in hand transcribing, and that the detection rate of IP boundaries is 88.7%, which is slightly lower than the labeler agreement rate.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.187-193
• /
• 2021

In order to solve the problem of false terrains caused by environmental interferences and tunneling effect in the conventional multi-beam seafloor terrain detection, this paper proposed a seafloor topography detection method based on fast two-dimensional (2D) Censored Mean Level Detector-statistics Constant False Alarm Rate (CMLD-CFAR) method. The proposed method uses s cross-sliding window. The target occlusion phenomenon that occurs in multi-target environments can be eliminated by censoring some of the large cells of the reference cells, while the remaining reference cells are used to calculate the local threshold. The conventional 2D CMLD-CFAR methods need to estimate the background clutter power level for every pixel, thus increasing the computational burden significantly. In order to overcome this limitation, the proposed method uses a fast algorithm to select the Regions of Interest (ROI) based on a global threshold, while the rest pixels are distinguished as clutter directly. The proposed method is verified by experiments with real multi-beam data. The results show that the proposed method can effectively solve the problem of false terrain in a multi-beam terrain survey and achieve a high detection accuracy.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.8
• /
• pp.551-560
• /
• 2012

Target detection by acoustic barrier method includes active and passive sonar technique and time reversal process whose theoretical background is already well defined. In this paper, the concept and theory of underwater detection by passive ocean time reversal is established. Also, the reason that this study was conducted was to investigate feasibility of complex mathematical modeling to provide some predictive capability for underwater acoustic barrier with passive time reversal. It may eventually lead to a useful predictive tool when designing underwater acoustic barrier detection system using the passive time reversal concept.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.533-534
• /
• 2010

Fiber optic sensor has bee widely used in the industrial applications. For the application of acoustic detection of the high voltage electric transformer Sagnac interferometer can be used. In this paper several different materials of mandrel were used in the fiber sensor array. Based on the transformer oil fiber optic sensor is more sensitive than in the air.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.1
• /
• pp.53-60
• /
• 2010

This paper dealt with the acoustic detection of partial discharge (PD) in insulation oil for insulation diagnostics of oil immersed transformers. Electrode systems such as needle to plane, plane to plane, and floating were fabricated to simulate some defects in transformers. A wide band acoustic emission(AE) sensor with the frequency ranges of 100 kHz~1 MHz and a narrow band AE sensor with the resonant frequency of 140 kHz were used in the experiment. Also, a decoupler and an amplifier were designed to detect and amplify the acoustic signal only. The decoupler separates acoustic signal from DC source without any distortion, and the amplifier has the gain of 40 dB in frequency ranges of 11 kHz~4 MHz. In the experiment, frequency components and propagation characteristics of acoustic signal were analyzed, and an algorithm of positioning of PD occurrence by the time difference of arrival was proposed. From the results, the frequency components of the acoustic signal exist from 50 kHz to 200 kHz and the positioning error of PD calculated by three AE sensors was within 1%.