• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.33-41
• /
• 2008

Architectural acoustics design of Namsadang exclusive use theaters should be designed to utilize variously to performance space that can fill flavor and taste of Namsadang performance of the Namsadang six yards. Also, analyze special quality that is sound enemy who follow in sound-absorbing materials fare arrangement of innards that is design material of architectural acoustics laying stress on tradition, use purpose and disappointment size that Namsadang exclusive use theaters seeks on the basis of specific space theme that is experience, disappointment form, seat and passageway Wall and ceiling etc. research and sound and meaning of a character wave motion powerful engineering phenomenon and reduction reverberation loss that is happened from indoor manufacturing thing reduction SCALE model of oval structure research and background of AL composition absorbing material of perforate 25% to heighten acoustic absorptivity of practical use internal organs sound absorption material emir quality sound-absorbing materials insert and layer of air most suitable reverberation time of Namsadang exclusive use theaters that 2.2m volume is $42,218\;m^3$ to become 1.2Sec architectural acoustics design do.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.1
• /
• pp.39-49
• /
• 2019

Acoustics are increasingly regarded as a remote-sensing tool that provides the basis for classifying and mapping ocean resources including seabed classification. It has long been understood that details about the character of the seabed (roughness, sediment type, grain-size distribution, porosity, and material density) are embedded in the acoustical echoes from the seabed. This study developed a sophisticated yet easy-to-use technique to discriminate seabed characteristics using a split beam echosounder. Acoustic survey was conducted in Tongyeong waters, South Korea in June 2018, and the verification of acoustic seabed classification was made by the Van Veen grab sampler. The acoustic scattering signals extracted the seabed hardness and roughness components as well as various seabed features. The seabed features were selected using the principal component analysis, and the seabed classification was performed by the K-means clustering. As a result, three seabed types such as sand, mud, and shell were discriminated. This preliminary study presented feasible application of a sounder to classify the seabed substrates. It can be further developed for characterizing marine habitats on a variety of spatial scales and studying the ecological characteristic of fishes near the habitats.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.407-410
• /
• 2000

In the using of FBG developed in home land, We designed and manufactured three types of FBG sound transducers the first in Korea. Analysizing special character's on FBG transducers manufactured, we made an experiment on respective frequency peculiarities in the water and we made an experiment on multi-point signal detection and direction about optional acoustic underwater. As the experimental result, we made it possible acoustic detection on frequency peculiarities to maximum 18k0z and made certain the system arrary possibilities, from now on we prepared the practical use study possibilities.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.67-70
• /
• 1997

In this paper, we evaluated the character of speech of hearing impaired person (HIP) who acquire his hearing loss after the youth. It is usually observed that severe HIP decreased not only speech perception but also vocalization. so there is a need for sensitive and quantitative measures or the assesment of the speech of the HIP to serve both diagnostic and prognosic purposes, 7 HIP and 12 normal hearing person(NHP) were studied with pure tone test and speaking test using word/sentence table which consists of vowel(a:), mono and two syllables and a sentence. we analyzed formant frequency, pitch, sound intensity, speech duration of HIP and NHP speech. According to the results, in the HIP's speech we find that formant frequency was shifted, first-formant prominence was reduced, the dynamic range of sound intensity was decreased, speech duration was prolonged. In the next, we expect the correlation between hearing and speech character of HIP is cleared through analysis of more acoustic parameters and precise selection of HIP group.

• MALSORI
• /
• no.62
• /
• pp.1-17
• /
• 2007

The purpose of this study was to investigate and quantitatively describe the acoustic characteristics of current Korean monophthongs. Recordings were made of 33 men and 27 women producing the vowels /i, e, ${\epsilon}$, a, ${\partial}$, o, u, i/ in a carrier phrase "This character is ___." A listening test was conducted in which 19 participants judged each vowel. F1, F2, and F3 were measured from the vowels judged as intended vowels by more than 17 people from the listening test. Analysis of formant data shows some interesting results including the undeniable confirmation of the 7-vowel system in modern Korean. It turns out that quite different sounding Korean vowels and English vowels happen to have very similar formant measurements. Also the difference between "citation-form reading" vs. "natural utterance reading" is discussed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.4 no.2
• /
• pp.31-37
• /
• 1995

This study is focused on the prediction of appropriate tool life by clarifying the correlation between progressive tool wear and AE signal. when rcutting SM45C by End mill in machining center. First of all, end mill have a problem that position of sensor sticking because it is revolution tool, but I think that it can be bained specific character according to sticking Sensor in the Vise. Consequently, the following results have been obtained; 1. Each cutting speed of feed rate over 0.1mm had a tendency to increase linearly according to the RMSAE 2. The level of AE signal at the same cutting area was more sensitive to depth of cut tharn the variation of feed rate 3. In the range of cutting duringqr about 75minqr atqr cutting speed 27m/min flankqr wear turns up aboutqr 0.21mm, aboutqr 0.29mm in the caseqr of about 65minqr at 33/min, qr hereby RMSAE increased rapidly at 0.2mm flank wear, also AE-HIT and CUM-CNTS.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.349-354
• /
• 2007

This paper considers acoustic analysis of silencer within a Dry vacuum pump. Main object is noise reduction of Dry Vacuum Pump using the silencer. First, we measured SPL and Intensity for noise source identification and then, designed for the silencer corresponding with noise character. 4-pole parameter are used for predicting transmission loss which is one of characteristics of silencer when we designed for silencer. Calculated Transmission Loss to change main effective factor and selected to optimal value using Design of Experiment. Finally, noise reduction is estimated to compare existing silencer with optimal silencer.

• Proceedings of the KSPS conference
• /
• 2007.05a
• /
• pp.203-206
• /
• 2007

The purpose of this study was to investigate and quantitatively describe the acoustic characteristics of current Korean monophthongs. Recordings were made of 33 men and 27 women producing the vowels /i, e, ${\varepsilon}$, a, (표현불가), O, u, (표현불가)/ in a carrier phrase "This character is _." A listening test was conducted in which 19 participants judged each vowel. F1, F2, and F3 were measured from the vowels judged as intended vowels by more than 17 people from the listening test. Analysis of formant data shows some interesting results including the undeniable confirmation of 7-vowel system in current Korean.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1429-1436
• /
• 2000

Suction muffler is one of the important component of a compressor for low noise level and high efficiency. The suction muffler which has the complicated flow path gives the higher transmission loss of sound, but lower efficiency of compressor results from the superheating effect and flow loss in suction flow path. It is shown that the computational analysis of fluid dynamics are very popular methods for designing of high performance and low noise suction muffler. To reduce the thermodynamic and flow loss in suction process, the flow path of suction muffler was estimated by FVM(Finite Volume Method) and verified by experiments. And to enlarge the transmission loss of sound, the acoustic properties inside the suction muffler was analyzed by FEM(Finite Element Method) and experiments. The smart muffler which gives a good efficiency and low noise character was developed by using those methods, and the effect was evaluated in compressor by experiment.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.441-445
• /
• 2009

We have developed a real-time software tool to extract a speech feature vector whose time sequences consist of three groups of vector components; the phonetic/acoustic features such as formant frequencies, the phonemic features as outputs on neural networks, and some distances of Japanese phonemes. In those features, since the phoneme distances for Japanese five vowels are applicable to express vowel articulation, we have designed a switch, a volume control and a color representation which are operated by pronouncing vowel sounds. As examples of those vowel interface, we have developed some speech training tools to display a image character or a rolling color ball and to control a cursor's movement for aurally- or vocally-handicapped children. In this paper, we introduce the functions and the principle of those systems.