• 한국항공우주학회지
• /
• 제30권4호
• /
• pp.28-37
• /
• 2002

음향불안정을 억제하는 수동제어기구중 하나인 음향공의 음향학적 효과를 파악하기 위해, 음향공이 장착된 로켓엔진 연소실의 음향장 특성을 수치해석적으로 조사하였다. 음향공 모델로서 Helmholtz 형태의 공명기가 채택되었고, 조화해석을 통해 주로 음향공에 의해 야기되는 음향학적 효과를 관찰하였다. 음향공의 음속을 조정하여 동조주파수를 변화시켜가면서 가진음원에 대한 연소실의 음향진동 응답을 구하고, 제1접선방향 음향모드의 감쇠인자를 구하였다. 동조주파수가 제1접선방향 음향모드의 공진주파수에 접근함에 따라 모드분할 현상이 나타났고, 이로인해 음향공을 본래의 제1접선방향 음향모드에 동조시키더라도 음향감쇠효과가 저하됨을 알았다. 모드분할 현상과 분할된 각 모드의 감쇠인자 및 음향 에너지 분포를 고려하였으며, 이를 토대로 효과적인 감쇠를 위해서는, 억제하고자 하는 음향모드로부터 모드분할 현상이 나타나지 않으면서 그 음향모드의 감쇠효과를 극대화하도록 음향공을 동조시키는 것이 바람직함을 알 수 있었다.

• 한국항공우주학회지
• /
• 제33권5호
• /
• pp.79-86
• /
• 2005

기체-액체형 분사기를 사용하는 고성능 로켓엔진을 위하여 공명기로서의 분사기의 역할을 연구하였다. 단일 분사기가 장착된 연소기에서의 음향 거동을 상온 선형 음향해석을 통해 조사하였다. 음향감쇠 효과는 분사기 길이에 따른 감쇠인자를 통해 정량화되었다. 계산 결과, 분사기는 음향 감쇠에 있어 큰 역할을 하며, 최적의 분사기 길이는 감쇠시키고자 하는 음향 주파수에 대한 반파장 길이에 해당함을 알 수 있었다. 배플이 장착된 연소기에서, 상온 조건과 실제 연소 상황의 조건을 설정하여 각 조건에 대해서 배플길이에 따른 최적 분사기 길이의 변화를 계산하여 제시하였다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년도 춘계학술발표대회 논문집
• /
• pp.436-440
• /
• 2008

Among those various facilities attached to the school building, the Auditorium is being utilized for not only the Exercise Activity but also for many purposes such as Culture, Public Performance, Education, Assembly and so on. In order to utilize in maximum such function of the multipurpose auditorium, an adequate acoustic design with regard to the Clarity of Voice and Music in accordance with its use-purpose should be accompanied. However, as the most part of multipurpose auditoriums is designed with high ceiling-height by its peculiar character, and due to use of the material of strong reflexibility, it is appearing the defect that excessively exposes the reverberation of sound. In order to make out an optimal acoustic condition within the broad space such as an auditorium, the acoustic characteristics must be considered from the planning stage, however in the most case, those acoustic problems are being settled through the repair works after construction. On such viewpoint, this Study intends to analyze the room acoustic characteristics from the planning stage using a computer simulation based on the blueprint of multipurpose auditorium in S High School located in Gwangju. It is considered that the material analyzed in such way could be practically applied as a fundamental material enables to improve the acoustic capability when a similar broad space is planned hereafter.

• International Journal of Aeronautical and Space Sciences
• /
• 제4권2호
• /
• pp.79-87
• /
• 2003

Acoustic response control of a comer-pinned plate using piezoelectric wafers was studied, both theoretically and experimentally. Three different sizes of aluminum alloy plates were used and available ball joints were employed to hold the plate at the four comers. The plate with the largest aspect ratio showed the largest and most clear responses to the acoustic excitation in the range of frequencies (0~200Hz), and sound pressure levels (80~100dB) as predicted. The reduction of the acoustic response of the plate by piezoelectric actuator was very significant, more than expected, but abatement of the sound transmission through the plate was only slightly altered by the piezoelectric actuator. This work is an original work extending earlier work with doors excited by acoustic fields. The important difference is the used of ball joints to simulate the joints.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.240-243
• /
• 2005

A design procedure using spatial Fourier transform is presented for a structural-acoustic coupled radiator that can emit sound in the desired direction with high power and low side lobe level. The design procedure consists of three steps. Firstly, the structural-acoustic coupled radiator is chosen to obtain strong coupling between structural vibration and acoustic pressure. The radiator is composed by two spaces which are separated by a wall. Spaces can be categorized as reverberant finite space and unbounded semi-infinite space, and the wall are composed of two plates and an opening. The velocities on the wall are predicted. Secondly, directivity and energy distribution of radiator are predicted in wave number domain using spatial Fourier transform. Finally, optimal design variables are calculated using a dual optimal algorithm. Its computational example is presented including the directivity and resulting pressure distribution using proposed procedure.

• 한국소음진동공학회논문집
• /
• 제17권4호
• /
• pp.289-297
• /
• 2007

SAFRS is the system designed to reproduce the harmonic sound into the space according to the environmental factors. Here the harmonic sound means the sound which judged by the subjective tests, and the methods were suggested in the former studies. In this research, SAFRS was applied into the Square of D University to evaluate and verify the effectiveness of the system and a few evaluations were carried out as follows; 1) sound perception, frequency, volume and harmony with the space, 2) images of the square and acoustic environment and 3) acoustic environment with existing sounds, fountain sound, produced sound by SAFRS, and both of them respectively. The results can be summarized as follows; 1) According to the evaluation on acoustic environment, no relationships were shown between the cognition of sounds produced by SAFRS and the frequency or volume, but inverse proportion was shown between the volume and special harmony. 2) As the result of image evaluation. the relationship between space and sound image was shown proportional only except the evaluation on main road at night time, it means that the sound proposal with the visual contents matching with the sounds would be more effective than the proposal of sound only. 3) Results of evaluation on acoustic environment showed that the cognition effect at night time was shown higher than that of day time when only the acoustic element was given and the effect was increased when the visual elements matches with the acoustic elements if both of them were given. It confirmed the harmony between visual and acoustic elements was very important.

• 한국항공우주학회지
• /
• 제48권9호
• /
• pp.725-730
• /
• 2020

본 연구는 초음속 로켓 제트 후류 전산음향 해석에 소요되는 해석 시간을 줄이기 위해 수행되었다. 해석 시간을 줄이기 위한 방안으로 초음속 제트 후류를 2차원 축대칭 문제로 가정하고 전산음향 해석을 수행하였다. 전산음향 해석 결과, 음향하중 계측 결과와 유사한 결과를 보였다. 본 연구를 통해 2차원 축대칭 전산해석을 이용하여 초음속 로켓 제트 후류의 음향하중 예측이 가능함을 확인할 수 있었다.

• 대한조선학회논문집
• /
• 제56권5호
• /
• pp.464-471
• /
• 2019

The acoustic power is a major acoustical characteristic of an underwater vehicle and could be measured in a reverberant water tank. In order to obtain accurate measurement results, the acoustic field formed by the sound source should be investigated quantitatively in the reverberant water tank. In this research, the acoustic field of a reverberant water tank containing an underwater sound source has been analyzed by using an acoustic radiosity method one of the numerical analysis methods suitable for the acoustic analysis of the highly diffused space. The source level of the underwater sound source and acoustical properties of the water tank input to the numerical analysis have been estimated by applying the reverberant tank plot method through a preliminary experiment result. The comparison of the numerical analysis result with that of the experiment has verified the accuracy of the acoustic radiosity method.

• 한국소음진동공학회논문집
• /
• 제15권12호
• /
• pp.1378-1388
• /
• 2005

Spatial control of sound is essential to deliver better sound to the listener's position in space. As it can be experienced in many listening environments. the quality of sound can not be manifested over every Position in a hall. This motivates us to control sound in a region we select. The primary focus of the developed method has to do with the brightness and contrast of acoustic image in space. In particular, the acoustic brightness control seeks a way to increase loudness of sound over a chosen area, and the contrast control aims to enhance loudness difference between two neighboring regions. This enables us to make two different kinds of zone - the zone of quiet and the zone of loud sound - at the same time. The other perspective of this study is on the direction of sound. It is shown that we can control the direction of perceived sound source by focusing acoustic energy in wavenumber domain. To begin with, the proposed approaches are formulated for pure-tone case. Then the control methods are extended to a more general case, where the excitation signal has broadband spectrum. In order to control the broadband signal in time domain, an inverse filter design problem is defined and solved in frequency domain. Numerical and experimental results obtained in various conditions certainly validate that the acoustic brightness, acoustic contrast, direction of wave front can be manipulated for some finite region in space and time.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.874-879
• /
• 2014

This study is aimed to evaluate the acoustic performances of outdoor apartment complex and to analyze acoustic performances change based on greening conditions. The object space located in Seoul, Yangcheon-gu, Sinjung-dong and classified according to type of space-form. The measurement reverberation time at 500 Hz is 0.86~1.84sec. The simulated reverberation time at 500 Hz is decreased from 1.57sec to 0.57sec in ㅁshape type of 69% treatment with greening and 1.7sec to 0.89sec in ㄷshape type of 70% treatment and 1.05sec to 0.53sec in ㄴshape type of 61.6% treatment.