• 한국수소및신에너지학회논문집
• /
• 제29권2호
• /
• pp.163-169
• /
• 2018

The present article discusses about the measurement techniques of acoustic impedance that becomes one of the important acoustic characteristics of various boundaries found inside of propulsion systems. Acoustic characteristics including acoustic impedance and reflection coefficient can be often assessed and estimated by use of the two-microphone method. Theoretical expressions of acoustic impedance and reflection coefficient measured in an impedance tube are presented for both cases with mean flow and without flow, and the practical application of the method through calibration is also provided. The acoustic impedance and the reflection coefficient are related with axial locations of microphones, thermodynamic characteristics of gas inside, and the transfer function between the pressure wave measurements at multiple locations.

• 한국멀티미디어학회논문지
• /
• 제12권2호
• /
• pp.281-289
• /
• 2009

본 논문에서는 공간 스케치에 일반적으로 나타나는 깊이 입력 오차를 줄이는 효과적인 공간 입력을 구현하기 위해 깊이 값 인지를 도와주는 한 면 혹은 두 면의 가상 음향 반향판을 통한 새로운 상호작용 기술을 소개하고, 다양한 실험을 통해 음향 반향판을 가진 가상의 벽이 현실적인 가상 개념 디자인을 위한 효과적인 피드백으로 사용된 것을 보여 준다. 제안된 아이디어를 이용하여 깊이 값이 일정한 평면에서는 한 면 가상 음향 반향판의 피드백을 이용하여 모델과의 일치도를 약 35% 높일 수 있었고, 기울어진 평면에서는 두면 반향을 이용하여 한 면에 비해 악 4%의 일치도를 증가시킬 수 있었으며, 곡면 꽃병에서는 약 15%의 일치도를 증가시킬 수 있었다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1987년도 학술발표회 논문집
• /
• pp.48-51
• /
• 1987

In this paper, acoustic reflection microscope system has been built for the purpose of detecting subsurface defects in materials and demonstrated for nondestructive testing application. 100 won coin, aluminuim, ceramics, and IC component employed as experimental samples and acoustic reflection microscope was operated in the focused and defocused mode at a frequency of operation of 3 MHz. It has been found that acoustic reflection icroscope has the resolution of 500 ${\mu}{\textrm}{m}$ and it has been an excellent tool for nondestructive testing.

• 한국소음진동공학회논문집
• /
• 제15권10호
• /
• pp.1131-1136
• /
• 2005

For the accurate measurement of acoustic properties of a surface, efforts have been made to reduce errors caused by external disturbance. If the reflection coefficient is considered as a transfer function between reflected wane and incident wave, the causality is required between them and the reflection coefficient should be of minimum phase. In this thesis, the minimum phase condition is applied to measure correct reflection coefficient. The reflection coefficient is approximated as a rational function In the Z domain by minimizing the sum square error. Then the minimum phase reflection coefficient is reconstructed using the distribution of poles and zeros of the reflection coefficient model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.43-46
• /
• 1988

In this paper, a methodology for determination of the thickness of layer on a substrate using reflection acoustic microscope has been presented. It has been shown that the amplitude and the phase of reflection coefficient of the layer-substrate composite has been used for measurement of layer thickness, acoustic velosity, mass density of the layer material. The reflection acoustic microscope operating at a frequency of 15 MHz has been used for the experiment and the measured acoustic impedance value for aluminum sample has agreed with the published data, and the measured layer thickness for silver-glass composite has agreed with that measured using micrometer.

• 한국음향학회지
• /
• 제34권6호
• /
• pp.493-498
• /
• 2015

물로 채워진 음향 펄스 튜브 내에는 가진 조건들에 따라 복잡한 형태의 음향 신호들이 형성될 수 있다. 이는 펄스 튜브를 이용해 저주파수 대역에서 평면파 반사계수를 측정하는 것을 어렵게 한다. 본 연구에서는 COMSOL Multiphysics를 이용하여 튜브 벽이 가진되는 경우 펄스 튜브 내에 평면파 뿐 아니라 비평면파 모우드의 복잡한 음장이 발생됨을 보였다. 모우드 분리 방법인 이차원 푸리에 필터링으로 입사 또는 반사하는 평면파 모우드만을 각각 분리할 수 있었다. 이에 시간 게이팅을 적용하므로 음향 시편의 평면파 반사계수를 보다 정확하게 결정할 수 있게 하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.855-860
• /
• 2005

For the accurate measurement of acoustic properties of a surface, efforts have been made to reduce errors caused by external disturbance. If the reflection coefficient is considered as a transfer function between reflected wave and incident wave, causality is required between them and the reflection coefficient should be of minimum phase. In this thesis, the minimum phase condition is applied to measure correct reflection coefficient. The reflection coefficient is approximated as a rational function in the Z domain by minimizing the sum square error. Then the minimum phase reflection coefficient is reconstructed using the distribution of poles and zeros of the reflection coefficient model. The incident wave, the reflected wave and the impulse response function of causality are recalculated from the minimum phase reflection coefficient for further applications.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.183-188
• /
• 2003

This study is to make the fundamentals of sound quality evaluation in regard of acoustical characteristics of passenger compartment. The deviation of frequency response function level within audible frequency is evaluated at receiving point in the research of room acoustics. In this study, frequency response function is the one between speaker and driver's ear positions. The positions of driver and audio speakers are optimized by analysis of acoustic mode of acoustic cavity. The main reflection planes are determined by analysis sound ray path diffused at optimized speaker positions. Finally, designer selects acoustical material by analysis of absorption effect of acoustical materials on the main reflection planes in order to avoid to distortion and fluctuation of frequency response function..

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.395-400
• /
• 2002

Epoxy coating and sealing used in nuclear plants for the protection of radiation degrades with aging and hazardous atmosphere. In order to evaluate the degradation of the epoxy, dependence of the acoustic impedance on the change of mechanical properties has been used. Unlike metals, the surface of the epoxy coating on a concrete liner is so wavy that the acoustic impedance is difficult to measure by using the reflectivity of the ultrasound on the interface surface because of the irregular reflection and propagation from the epoxy surface. SA(simulated annealing) algorithm is applied to calculate the acoustic impedance using a reflection wave from the rough epoxy surface. The surface waviness and acoustic impedance are taken into account and determined by SA method to evaluate the state of degradation quantitatively.

• 한국소음진동공학회논문집
• /
• 제24권12호
• /
• pp.969-976
• /
• 2014

Nowadays, it is required for naval ships to estimate 3D underwater radiated noise pattern in all direction at peak frequencies of hull vibration for the reduction of being detected and doing the effective operation. For this purpose, the numerical method has to be developed to calculate 3D underwater radiated noise pattern with experimental data. It is very difficult to obtain the experimental data for the real ship. Alternative to get the experimental results is to use NAH(near-field acoustic holography) in acoustic tank with experimental model. Application of NAH in acoustic tank for the experimental model needs some investigation of reflection wave from the wall of the acoustic tank and unmeasured zone of the experimental model due to the supporting structure for it. In this study, the effect of reflection wave in the acoustic tank and unmeasured area of the experimental model when using the NAH was investigated with experiment and numerical model. From these, it is known for the error due to reflection wave can be reduced when the distance between the measurement plane and source is being shorten. Also, unmeasured area of the experimental model gives rise to some error in the estimation of the far-field acoustic pressure.