• 대한수학회보
• /
• 제33권2호
• /
• pp.177-186
• /
• 1996

Colton and Wendland [1] have considered acoustic wave propagations in a spherically symmetric medium. They used constructive method for in a spherically symmetric medium. They used constructive method for solving the exterior Neumann problem. Jones [2] has derived an integral equation for the exterior acoustic problem. Jones has also discussed analytical and numerical solution of the acoustic problem.

• 한국생산제조학회지
• /
• 제8권3호
• /
• pp.66-75
• /
• 1999

This paper is concerned with a analysis of noise by inverse problem available for analyzing the two and three-dimensional acoustic field problems. The noise of analysis considered in this study can be reduced to an optimum problem to find the optimal set of parameters defining the vibrating state of noise source surfaces. The optimal set of parameters are searched by the standard optimization procedure minimizing the square sum of the residuals between the measured and computed quantities of sound pressure at some points in the acoustic field. Computation is carried out for typical examples in which the noise sources are located on the infinite plane. It is demonstrated that the noise of analysis can be effectively made by using the sensitive reference data.

• ETRI Journal
• /
• 제36권3호
• /
• pp.506-509
• /
• 2014

This paper studies the energy efficiency power allocation for cognitive radio networks based on uplink orthogonal frequency-division multiplexing. The power allocation problem is intended to minimize the maximum energy efficiency measured by "Joule per bit" metric, under total power constraint and robust aggregate mutual interference power constraint. However, the above problem is non-convex. To make it solvable, an equivalent convex optimization problem is derived that can be solved by general fractional programming. Then, a robust energy efficiency power allocation scheme is presented. Simulation results corroborate the effectiveness of the proposed methods.

• ETRI Journal
• /
• 제36권4호
• /
• pp.686-689
• /
• 2014

This paper studies energy-efficiency (EE) power allocation for cognitive radio MIMO-OFDM systems. Our aim is to minimize energy efficiency, measured by "Joule per bit" metric, while maintaining the minimal rate requirement of a secondary user under a total power constraint and mutual interference power constraints. However, since the formulated EE problem in this paper is non-convex, it is difficult to solve directly in general. To make it solvable, firstly we transform the original problem into an equivalent convex optimization problem via fractional programming. Then, the equivalent convex optimization problem is solved by a sequential quadratic programming algorithm. Finally, a new iterative energy-efficiency power allocation algorithm is presented. Numerical results show that the proposed method can obtain better EE performance than the maximizing capacity algorithm.

• 한국산학기술학회논문지
• /
• 제11권7호
• /
• pp.2328-2333
• /
• 2010

직접경계요소법은 음향방사문제 해석에 널리 적용되는 수치해석기법중 하나이지만, 외부 음향방사 문제에 있어서는 방사면 내부공간의 고유주파수 근방에서 비유일성이 나타나게 된다. 이를 해결하기 위한 방법으로 CHIEF 방법이 일반적으로 적용되어 왔으며, 최근 들어서는 ICA-Ring 방법과 같은 새로운 기법이 제안되어 해의 정확도 향상에 기여하고 있다. 본 논문에서는 앞서 언급한 두 가지 비유일성 회피기법들의 특성을 살피고, 각각의 기법 구현을 포함한 직접경계요소법 기반의 수치해석 코드를 작성한다. 또한, 법선방향 균일속도로 진동하는 구의 음향방사문제에 대한 수치해석을 수행하고 그 결과를 해석 해와 비교하여 각각의 기법들에 대한 비유일성 회피 성능을 고찰한다.

• 플랜트 저널
• /
• 제4권3호
• /
• pp.54-59
• /
• 2008

The resonance of boiler is caused by exciting force in the gas path and it generates the vibration by the harmony of boiler's dimensional factor. According to trending toward the boiler of increasing capacity and a bigger size, it has a problem of the vibration at back-pass heating surfaces. We can predict such vibrations as comparison between vortex frequency and gas column's natural frequency. We can't rely on the method for the past decades because of changing parameters, such as an allowable error, gas temperature, gas velocity, Strouhal number. We can reduce the vibration to use the seasoning effect and change the operating condition in coal fired boiler but it's not essential solution. When the vibration occurred in the model boiler, we must measures the acoustic pressure and frequency of places for considering the means. So far, we confirmed the problem from field measures and theoretical analysis about the acoustic vibration of boiler. We installed anti-acoustic baffle in a existing boiler to change the acoustic natural frequency at the cavity, which results in reducing the acoustic vibration. The first, we prove that the acoustic resonance is caused by harmonizing vortex shedding frequency of tube heat surface with acoustic natural frequency of cavity in the range of 650~750 MW loads. The second, the acoustic resonance at the back-pass heating surface has the third order of acoustic natural frequency at the second economizer. We install five anti-acoustic baffles at the second economizer to reducing the resonance. We confirm considerably reducing the acoustic vibration of boiler during the commercial boiler.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.187-193
• /
• 2021

In order to solve the problem of false terrains caused by environmental interferences and tunneling effect in the conventional multi-beam seafloor terrain detection, this paper proposed a seafloor topography detection method based on fast two-dimensional (2D) Censored Mean Level Detector-statistics Constant False Alarm Rate (CMLD-CFAR) method. The proposed method uses s cross-sliding window. The target occlusion phenomenon that occurs in multi-target environments can be eliminated by censoring some of the large cells of the reference cells, while the remaining reference cells are used to calculate the local threshold. The conventional 2D CMLD-CFAR methods need to estimate the background clutter power level for every pixel, thus increasing the computational burden significantly. In order to overcome this limitation, the proposed method uses a fast algorithm to select the Regions of Interest (ROI) based on a global threshold, while the rest pixels are distinguished as clutter directly. The proposed method is verified by experiments with real multi-beam data. The results show that the proposed method can effectively solve the problem of false terrain in a multi-beam terrain survey and achieve a high detection accuracy.

• 한국인터넷방송통신학회논문지
• /
• 제9권5호
• /
• pp.243-247
• /
• 2009

수중통신은 지상과는 다른 환경적 문제에 의해 고속 데이터 전송률을 얻기 위해서는 여러 가지 어려움이 있다. 이러한 문제점을 극복하기 위해서 끊임없는 연구가 계속되어 왔다. 본 논문에서는 수중 채널의 특성을 살펴보고 현재 수중 통신을 위한 다양한 송, 수신 기법에 대한 설명과 국내 외 수중 통신 동향을 알아본다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1090-1095
• /
• 2007

A study was carried out to investigate the fluid-structure interaction phenomena of buried hydrophone system that exposed complex loads due to handling, transportation and installation. The buried hydrophone system has necessarily neighborhood structures for installation. Because of the neighborhood structure, acoustic field is deformed. We analyze the piezoelectric-structural-acoustic coupled problem and the results to use a finite element analysis software, ANSYS, which has an coupled field analysis capability. The effect of the component of hydrophone system is revealed altogether in pressure distribution. So, we classify and analyze the problem by four different compositions for decomposition.

• 한국소음진동공학회논문집
• /
• 제17권9호
• /
• pp.797-804
• /
• 2007

A study was carried out to investigate the fluid-structure interaction phenomena of buried hydrophone system that exposed complex loads due to handling, transportation and installation. The buried hydrophone system has necessarily neighborhood structures for installation. Because of the neighborhood structure, acoustic field is deformed. We analyze the piezoelectric-structural-acoustic coupled problem and the results to use a finite element analysis software, ANSYS, which has an coupled field analysis capability. The effect of the component of hydrophone system is revealed altogether in pressure distribution. So, we classify and analyze the problem by four different compositions for decomposition.