• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2439-2442
• /
• 2003

In this paper, we examine the acoustic characteristics of Korean vowels on pitch alteration utterance. The prosody is known as an indicator of acoustic characteristics of emotions. Also, speech is acoustically differenced according to the emotional variation and environmental variation, although speaker utters the same speech. We analyzed the spectral envelopes and formants from the voiced regions as data points on the speech waveform.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.193-198
• /
• 2001

The feasibility of the acoustic emission technique in predicting the residual fatigue life of STS304 stainless steel is presented. Acoustic emission was continuously monitored during the fatigue tests. Considerable acoustic emission occurred during the first few cycles. Acoustic Emission increased rapidly at about 90% of the fatigue life, clear and ample warning of impending fatigue failure was observed. Fatigue damage accumulation was evaluated in terms of an AE cumulative counts. The AE cumulative counts may be taken as an indicator of fatigue cumulative damage. Fatigue damages corresponding to 20, 40, 60 and 80% of the total life were induced at a cyclic stress amplitude. The specimens with and without fatigue damage were subjected to tensile tests. In tensile tests, the total cumulative counts were reduced with increasing fatigue damage. It was observed that the residual tensile strength of material did not change significantly with prior cyclic loading damages.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.5
• /
• pp.400-405
• /
• 2020

To analyze the flow distribution formed by multiple acoustic sources, the distribution of acoustic streaming speed caused by an ultrasonic transducer composed of two identical piezoelectric vibrators was examined for various angles between the sound sources. In order to measure the distribution of the speed along the acoustic axis of the transducer, a simple measurement method using a droplet indicator having density similar to that of water is suggested. The simulation results calculated by a numerical method and experimental results showed a similar tendency, and the change of flow speed distribution with the intersection angle between acoustic beams radiated from two acoustic sources was analyzed.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2006.03a
• /
• pp.79-93
• /
• 2006

It is well known that acoustic emission (AE) is indicator of rock fracturing or damage as rock is brought to failure under the uniaxial compressive loads. In this paper, an experimental study on the source location of acoustic emission on the cylindrical specimens of granite under uniaxial compression test was made. The AE source location was made by measuring the six channel AE data. Comparing to this experiment, the numerical method is applied to model the initiation and propagation of fracture by AE using a numerical code, RFPA (Realistic Failure Process Analysis). This code incorporates the mesoscopic heterogeneity in Young's modulus and rock strength characteristic of rock masses. In the numerical models, values of Young's modulus and rock strength are realized according to a Weibull distribution in which the distribution parameters represent the level of heterogeneity of the medium. The results of the simulations show that RFPA can be used not only to produce acoustic emission similar to those measurements in our experiments, but also to predict fracturing patterns under uniaxial loading condition.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.2
• /
• pp.109-116
• /
• 1993

Underwater acoustic positioning systems have been extensively used not only in surface position fixing but also in underwater position fixing. Recently, these systems have been applied in the field of installation and underwater inspection of offshore platforms etc. But in these systems are included the fixing errors as results of a signal with additive noise and irregular motion of vessel by ocean waves. To improve the accuracy of the position fixing a Kalman filter is applied to the supershort baseline (SSBL) acoustic positioning system with beacon mode in noise conditions. The position data obtained by the Kalman filter is compared with raw position data and it is confirmed in the simulation that the former is more accurate than the latter. And an indicator monitoring the filtering effect is described while ship's moving.

• Phonetics and Speech Sciences
• /
• v.7 no.2
• /
• pp.55-62
• /
• 2015

It is widely accepted that Parkinson's disease(PD) is the most common cause of hypokinetic dysarthria, and its characteristics of 'short rushes of speech' have become more evident along with the severity of motor disorders. Speech alternate motion rates (AMRs) are particularly useful for observing not only rate abnormalities but also deviant speech. However, relatively little is known about the characteristics of 'short rushes of speech' in terms of AMRs of PD except for the perceptual characteristics. The purpose of this study was to examine which acoustic features of 'short rushes of speech' in terms of AMRs are a robust indicator of Parkinsonian speech. Numbers of syllabic repetitions (/pə/, /tə/, /kə/) in AMR tasks were analyzed through acoustic methods observing a spectrogram of the Computerized Speech Lab in 9 patients with PD. Acoustically, we found three characteristics of 'short rushes of speech': 1) Vocalized consonants without closure duration(VC) 76.3%; 2) No consonant segmentation(NC) 18.6%; 3) No vowel formant frequency(NV) 5.1%. Based on these results, 'short rushes of speech' may affect the failure to reach and maintain the phonatory targets. In order to best achieve the therapeutic goals, and to make the treatment most efficacious, it is important to incorporate training methods which are based on both phonation and articulation.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.4
• /
• pp.467-475
• /
• 2019

A high-intensity ultrasound wave generates acoustic streaming and acoustic radiation forces when propagating through a medium. An acoustic radiation force generated in a three-dimensional space can produce a solid tactile sensation, delivering spatial information directly to the human skin. We placed 154 ultrasound transmit elements with a frequency of 40 kHz on a concave circular dish, and generated an acoustic radiation force at the focal point by transmitting the ultrasound wave. To feel the tactile sensation better, the transmit elements were excited by sine waves whose amplitude was modulated by a 60 Hz square wave. As an application of ultrasonic tactile sensing, a region where tactile sense is formed in the air is used as an indicator for the position of the hand. We confirmed the utility of ultrasonic tactile feedback by implementing a system that provides the number of fingers to a machine by receiving the shape of the hand at the focal point where the tactile sense is detected.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.12 no.4
• /
• pp.9-17
• /
• 1993

Three types of piezoelectric sensors to detect acoustic emission signals were developed and characterized. Epicentral displacement and velocity of a plate to have infinite boundary were calculated by convolution between a Green's function and a simulated source time function to show parabolic rising characteristic. The sensor calibration system set up was composed of a steel plate, a glass capillary, an indentor and a load cell indicator The transient elastic signals were detected by the sensors. The results were compared with the theoretical results and Fast Fourier Transformed. As the results, the sensor fabricated using a disk shape of a piezoelectric PZT element showed resonant characteristics. The sensors fabricated using a conical shape PZT element and a PVDF polymer film showed the wide band characteristics for particle displacement and velocity, respectively. The calculated results showed good agreements with the transient responses in the cases of the wide band sensors and it was confirmed that the simulated source time function had been properly assumed.

• Journal of the Korean Society of Safety
• /
• v.6 no.4
• /
• pp.21-27
• /
• 1991

Acoustic Emission was monitored during tensile test and loading-holding-unloa-ding cycle test for two types (notched and unnotched) of CFRP specimens. AE activities showed that the fiber breakage during tensile tests depended upon the specimen geometry. We obtained new AE parameter such as the ration (damage ratio= AE events during unloading test / AE events during loading test) and the felicity ratio from which we investigated dynamic fracture process of CFRP specimens. The damage ratio of AE events was shown to be a good indicator to distinguish the generated fracture mechanism, such as fiber breakage and delamination. Also, ultrasonic testing results after loading-holding-unloading cycle test were good agreement with AE test results to detect defects or fiber breakage.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.888-892
• /
• 2014

This paper evaluates $C_{50}$ in elementary school classrooms and considers utilization of $C_{50}$ as an assessment indicator of acoustic performance. $C_{50}$ is early-to-late arriving sound ratio, recent study reported that $C_{50}$ is more appropriate as a measure of clarity and speech intelligibility than D50 because it is linearly related to subjective responses. The average of $C_{50}$ in elementary school classrooms appeared to be about +2 dB ~ +3 dB throughout 500 Hz ~ 4 kHz. However, absolute evaluation is difficult because there is no suitable reference or standard yet. As deviation of $C_{50}$ according to location is larger than reverberation time, it is expected that $C_{50}$ will be more sensitive when someone assesses acoustic performance of classrooms. Correlation between $C_{50}$ and reverberation time is very high. From logarithmic regression equation, we can estimate appropriate range of $C_{50}$ in elementary school classrooms indirectly, using standard of reverberation time in ANSI.