• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.454-458
• /
• 2007

The removal characteristics of ionic species, such as $Ca^{2+}$, $Mg^{2+}$, $Sr^{2+}$, $SO{_4}^{2-}$, $NO{_3}^-$, and $Cl^-$ by adsorption on the alumina were investigated. Alumina precusor powders were prepared from $Al(NO_3)_3{\cdot}9H_2O$ and $NH_4OH$. Alumina materials prepared from the heat treatment in a furnace at $450{\sim}750^{\circ}C$ for 5 h were analysed using FT-IR and the Brunauer-Emmett-Teller (BET) method. The specific surface area of the product particles decreased significantly with treatment temperature. The adsorption capacities of $SO{_4}^{2-}$and $NO{_3}^-$ on alumina were 23 mg/g and 12.4 mg/g, respectively. But, removal efficiencies of $Cl^-$ were less than 4 mg/g. In general, the removal efficiencies of the anion species were decreased with increasing treatment temperature. The best anion removal efficiency was obtained when the alumina was treated under $450^{\circ}C$. Removal efficiencies of $Ca^{2+}$, $Mg^{2+}$, and $Sr^{2+}$ were increased with increasing treatment temperature.

• Journal of Conservation Science
• /
• v.11 no.1 s.14
• /
• pp.28-37
• /
• 2002

The cleaning in conservation treatment of cultural heritage is very important process. For the best conservation treatment of cultural heritage, except having a good detergency, the cleaning agent must be able to keep the heritage from the secondary deposition and re-soiling, damage and etc. In this paper, the dust (lichen, algae, dust, etc.) on the surface of stone made heritage was treated with some kinds of solvents and analyzed with FT-IR to develop a cleaning agent for stone made cultural heritage. And the cleaning ability to the dust and the corrosion ratio to the granite of the cleaning agent was investigated. Nonionic surfactants were good for treatment of stone-made cultural heritage. The reason is that nonionic surfactants are stable in acidic solution, and possess low reactivity with the compound of stone and low possibility to the second contamination, and build up the reactivities of acids and oxidants. A new cleaning agent composed with $H_2O_2/HF/NP-10$ shows a good cleaning ability for the conservation treatment of stone made cultural heritage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.2
• /
• pp.269-276
• /
• 2016

This study was conducted to determine the inactivation effects of slightly acidic electrolyzed water (SAEW) on microorganisms attached to salted Chinese cabbage and food materials of kimchi, such as slice radish and green onion. In addition, changes in microbial and physicochemical quality of manufactured kimchi during storage at $4^{\circ}C$ for 4 weeks were investigated. Compared to the untreated control with tap water, total bacterial counts (TBC) of Chinese cabbage, slice radish, and green onion were reduced by 1.75, 1.68, and 1.03 log CFU/g at dipping times of 20 min, 5 min, and 10 min, respectively, upon treatment with 30 ppm SAEW at $40^{\circ}C$. Effect of microbial inhibition was higher in salted Chinese cabbage brined in 10% salt (w/v) of 30 pm SAEW at $40^{\circ}C$ than in untreated control with tap water, as indicated by 1.00 log CFU/g reduction. TBC of kimchi manufactured with materials treated with 30 ppm SAEW at $40^{\circ}C$ was not significantly affected compared to untreated control, although coliforms were remarkably reduced compared to the untreated control. At the beginning of storage (1 weeks), TBC and lactic acid bacteria (LAB) counts increased by approximately 9 and 7.66~8.18 log CFU/g, respectively, and coliforms were completely eliminated. The pH and acidity of kimchi at 2 weeks were 4.34~4.49 and 0.55~0.66%, respectively, and then slowly decreased. The texture (firmness) of kimchi decreased with storage time, but the difference was not significant. This combined treatment might be considered as a potentially beneficial sanitizing method for improving the quality and safety of kimchi.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.5
• /
• pp.776-781
• /
• 2010

The properties and bactericidal activities of strongly acidic electrolyzed water (SEW) against food-borne pathogenic bacteria, vegetables and kitchen apparatuses were investigated. The available chlorine concentration, pH and oxidation reduction potential (ORP) of SEW were $35{\pm}1.2\;ppm$, $2.3{\pm}0.2$, and $1,140{\pm}20.4\;mV$, respectively. Five strains of food-borne bacteria with initial cell number of 7.00 log CFU/mL were not detected except Bacillus cereus after treatment with SEW for 60 sec. The numbers of Bacillus cereus were reduced to 2.08{\pm}1.00 log CFU/mL at the same condition. In vegetables, SEW treatment after washing strongly in alkalic electrolyzed water (AEW) showed better bactericidal effects than SEW only. The viable cell on stainless steel bowl ($3.86{\pm}2.49\;\log\;CFU/100\;cm^2$) and cup for water ($2.40{\pm}1.80\;\log\;CFU/100\;cm^2$) were not detected by SEW treatment (35 ppm of available chlorine concentration) for 30 sec, but survival of more than 1.00 log CFU/$100\;cm^2$ of viable cell was shown by washing of sodium hypochlorite solution at the same condition. On the other hand, the coliform group bacteria ($5.08{\pm}4.00\;CFU/100\;cm^2$) were detected on rubber globe only, and more than 2.00 log CFU/$100\;cm^2$ of viable cell and coliform group bacteria on it survived, though it was washed with flowing SEW for 30 sec.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.8
• /
• pp.1296-1303
• /
• 2014

This study was conducted to develop predictive models for the growth of Bacillus cereus on carrot treated with slightly acidic electrolyzed water (SAcEW) and ultrasonication (US) at different storage temperatures. In addition, the inactivation of B. cereus by US with SAcEW was investigated. US treatment with a frequency of 40 kHz and an acoustic energy density of 400 W/L at $40^{\circ}C$ for 3 min showed the maximum reduction of 2.87 log CFU/g B. cereus on carrot, while combined treatment of US (400 W/L, $40^{\circ}C$, 3 min) with SAcEW reached to 3.1 log CFU/g reduction. Growth data of B. cereus on carrot treated with SAcEW and US at different temperatures (4, 10, 15, 20, 25, 30, and $35^{\circ}C$) were collected and used to develop predictive models. The modified Gompertz model was found to be more suitable to describe the growth data. The specific growth rate (SGR) and lag time (LT) obtained from the modified Gompertz model were employed to establish the secondary models. The newly developed secondary models were validated using the root mean square error, bias factor, and accuracy factor. All results of these factors were in the acceptable range of values. After compared SGR and LT of B. cereus on carrot, the results showed that the growth of B. cereus on carrot treated with SAcEW and US was slower than that of single treatment. This result indicates that shelf life of carrot treated with SAcEW and US could be extended. The developed predictive models might also be used to assess the microbiological risk of B. cereus infection in carrot treated with SAcEW and US.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.317-323
• /
• 2009

In this study the nanofiltration (NF) membrane treatment of a nitric acid waste solutions containing $Pb^{+2}$ heavy metal ion discharging from the etching processes of an electronics and semiconductors industry has been studied for the purpose of recycling of nitric acid etching solutions. Three kinds of NF membranes (General Electric Co. Duraslick NF-4040 membrane, Dow Co. Filmtec LP-4040 membrane and Koch Co. SelRO MPS-34 4040 membrane) were tested for their separation efficiency (total rejection) of $Pb^{+2}$ ion and membrane stability in nitric acid solution. NF experiments were carried out with a dead-end membrane filtration laboratory system. The membrane permeate flux was increased with the increasing storage time in nitric acid solution and lowering pH of acid solution because of the enhancing of NF membrane damage by nitric acid. The membrane stability in nitric acid solution was more superior in the order of Filmtec LP-4040 < Duraslick NF-4040 < SelRO MPS-34 4040 membrane. The total rejection of Pb+2 ion was decreased with the increasing storage time in nitric acid solution and lowering the pH of acid solution. The total rejection of $Pb^{+2}$ ion after 4 months NF treatment was decreased from 95% initial value to 20% in the case of Duraslick NF-4040 membrane, from 85% initial value to 65% in the case of SelRO MPS-34 4040 membrane and from 90% initial value to 10% in the case of Filmtec LP-4040 membrane. These results showed that SelRO MPS-34 4040 NF membrane was more suitable for the treatment of an acidic etching waste solutions containing heavy metal ions.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.279-290
• /
• 2016

The performance of upflow anaerobic bioelectrochemical reactor (UABE), equipped with electrodes (anode and cathode) inside the upflow anaerobic reactor, was compared to that of upflow anaerobic sludge blanket (UASB) reactor for the treatment of acidic distillery wastewater. The UASB was stable in pH, alkalinity and VFAs until the organic loading rate (OLR) of 4.0 g COD/L.d, but it became unstable over 4.0 g COD/L.d. As a response to the abrupt doubling in OLR, the perturbation in the state variables for the UABE was smaller, compared to the UASB, and quickly recovered. The UABE stability was better than the UASB at higher OLR of 4.0-8.0 g COD/L.d, and the UABE showed better performance in specific methane production rate (2,076mL $CH_4/L.d$), methane content in biogas (66.8%), and COD removal efficiency (82.3%) at 8.0 g COD/L.d than the UASB. The maximum methane yield in UABE was about 407mL/g $COD_r$ at 4.0 g COD/L.d, which was considerably higher than about $282mL/g\;COD_r$ in UASB. The rate limiting step for the bioelectrochemical reaction in UABE was the oxidation of organic matter on the anode surface, and the electrode reactions were considerably affected by the pH at 8.0 g COD/L.d of high OLR. The maximum energy efficiency of UABE was 99.5%, at 4.0 g COD/L.d of OLR. The UABE can be an advanced high rate anaerobic process for the treatment of acidic distillery wastewater.

• Journal of Ginseng Research
• /
• v.44 no.3
• /
• pp.424-434
• /
• 2020

Background: Amino acids are one of the major constituents in Panax ginseng, including neutral amino acid, acidic amino acid, and basic amino acid. However, whether these amino acids play a role in ginsenoside conversion during the steaming process has not yet been elucidated. Methods: In the present study, to elucidate the role of amino acids in ginsenoside transformation from fresh ginseng to red ginseng, an amino acids impregnation pretreatment was applied during the steaming process at 120℃. Acidic glutamic acid and basic arginine were used for the acid impregnation treatment during the root steaming. The ginsenosides contents, pH, browning intensity, and free amino acids contents in untreated and amino acid-treated P. ginseng samples were determined. Results: After 2 h of steaming, the concentration of less polar ginsenosides in glutamic acid-treated P. ginseng was significantly higher than that in untreated P. ginseng during the steaming process. However, the less polar ginsenosides in arginine-treated P. ginseng increased slightly. Meanwhile, free amino acids contents in fresh P. ginseng, glutamic acid-treated P. ginseng, and arginine-treated P. ginseng significantly decreased during steaming from 0 to 2h. The pH also decreased in P. ginseng samples at high temperatures. The pH decrease in red ginseng was closely related to the decrease in basic amino acids levels during the steaming process. Conclusion: Amino acids can remarkably affect the acidity of P. ginseng sample by altering the pH value. They were the main influential factors for the ginsenoside transformation. These results are useful in elucidating why and how steaming induces the structural change of ginsenoside inP. ginseng and also provides an effective and green approach to regulate the ginsenoside conversion using amino acids during the steaming process.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.4
• /
• pp.79-86
• /
• 2015

Korean territories has formed about 70% of mountainous areas that have acidified serious level to average pH 4-5. There are a number of abandoned metal mines about 1,000 in Korea. However, mine tailings and waste rock included heavy metals are exposed to long-term environment without prevention facility or treatment system. Thus, ongoing management and monitoring of soil environment are required. Most of abandoned mine scattered in forest areas of slopes. Soil erosion due to continuous rainfall in the slopy areas can cause the secondary pollution by the influence eutrophication of water system and the productivity loss of the plant. Therefore, this study would like to estimate pH leaching rate by artificial rainfall using waste neutralization-agent in lysimeter. Moreover, the potentially of secondary pollution related to precipitation is figured out through the experiments, and the optimal planting methods would examinate after neutralizing treatment in soil. Experiments composed three kinds of lysimeter; lysimeter 1 had filled only acidic soil, lysimeter 2 had neutralized soil, and lysimeter 3 had planting plants after neutralized soil. In the results, lysimeter 2 showed the lowest pH leaching, and there is not specific relativity with pH leaching of the seasonal characteristics.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.4
• /
• pp.312-318
• /
• 2015

The aim of this study was to investigate the possibility of the supernumerary teeth for the stem cell source in dentistry. The Real Time Quantitative Reverse Transcription Polymerase Chain Reaction (Real Time qRT-PCR) method was used to evaluate the differentiation toward the odontoblast of the supernumerary dental pulp stem cells (sDPSCs). Supernumerary dental pulp stem cells were obtained from 3 children (2 males and 1 female, age 7 to 9) diagnosed that the eruption of permanent teeth was disturbed by supernumerary teeth. The common genes for odontoblasts are alkaline phosphatase (ALP), osteocalcin (OC), osteonectin (ON), dentin matrix acidic phosphoprotein 1 (DMP-1), dentin sialophosphoprotein (DSPP). The sDPSCs were treated for 0 days, 8 days and 14 days with additives and then Real Time qRT-PCR was performed in intervals of 0 days, 8 days and 14 days. The alizarin-red solution staining was performed to visualize the stained color for the degree of calcification at 7 days, 14 days, 21 days and 28 days after treating additives to the sDPSCs. From the result of the Real Time qRT-PCR, the manifestation exhibit maximum value at 8 days after additive treatment and shifted to a decrease trend at 14 days. Alizarin-red solution staining exhibit light results at 7 days after staining and generalized dark result at 14 days. Consequently, in studies with sDPSCs, appropriate treatment time of additives for Real Time qRT-PCR is 8 days. Also, a suitable period of Alizarin-red solution staining is 14 days.