• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1071-1079
• /
• 2011

In this study, coal combustion ash (CCA) was evaluated for its stabilization effect on acidic mine waste with column experiment. Total of six treatments were installed depending on mixing ratio between coal wastes and CCA (0, 20, 40%) and mixing method (completely mixing and layered). Artificial acidic rain (pH 5.6) was used for feeding solution with flow rate of $0.05mL\;min^{-1}$. Result showed that higher pH of leachate was observed as more CCA was mixed. The highest pH in leachate was measured when 40% of CCA was mixed with coal waste (pH of 5.8). Also, complete mixing with CCA and coal waste was more effective to increase the pH of leachate than layered treatment. Regarding the reduction of soluble Fe amount, the highest efficiency (78%) was observed when 20% of coal ash was completely mixed with mine waste. Based on those result, optimum mixing ratio of coal ash with mine waste can be ranged 20-40% depending on environmental circumstances in the field.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.3
• /
• pp.367-374
• /
• 2000

The composition of dissolved gases and nutrients in a liquid medium were determined for establishment of the optimum conditions for in vitro culture of Helicobacter pylori. A microaerobic condition facored by the organism was prepared by adjusting the partial pressure of the gas, agitation speed, and viscosity of the medium. The gaseous concentrations were controlled by utilizing CampyPak Plus that reduced oxygen while augmenting carbon dioxide. Agitation of the broth facilitated the oxygen transfer to the cells, yet inhibited the growth at high rates. An increase of viscosity in the medium repressed the culture although this variable was relatively insignificant. The chemical constituents of the liquid broth were examined to establish an economic model for H. pylori cultivation. The microbe required a neutral pH for optimum growth, and yet was also able to proliferate in an acidic condition, presumably by releasing the acidity-modulating enzyme, urease. Cyclodextrin and casamino acid were investigated as growth enhancers in place of serum, while yeast extract unexpectedly inhibited the cells. A low concentration of glucose, the unique carbon source for the organism, increased the cell density, yet high concentrations resulted in an adverse effect. Under optimally dissolved gas conditions, the cell concentration in brucella broth supplemented with serum substitutes and glucose reached $1.6{\times}10^8$ viable cells/ml which was approximately 50% higher than that obtained in the liquid medium added with only cyclodextrin or serum.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.694-698
• /
• 2006

A method has been described for the chemical speciation, preconcentration and determination of Cr(III) and Cr(VI) species in filtered tannery waste waters by flame atomic absorption spectrometry using ion-exchange resins. Amberlite IR-120($H^+$) strongly acidic cation exchanger and Amberlite IRA-410($CI ^-$) strongly basic anion exchanger resins were used for the separation and preconcentration of Cr(III) and Cr(VI) species, respectively. Optimum condition for preconcentration and speciation was obtained by testing pH of sample and eluent, flow rates of sample and eluent, amount of resins, volume of sample and eluents, and effect of foreign ions. The recommended method has been successfully applied for the preconcentration and determination of chromium species in the dissolved phase of waste water samples collected from a tannery waste water treatment plant in Kayseri, Turkey. The detection limits achieved were 0.73 $\mu$g/L for Cr(III) and 0.81 $\mu$g/L for Cr(VI). Recovery studies showed 99% for Cr(III) and 98% for Cr(VI), for samples spiked with single species.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.1
• /
• pp.26-35
• /
• 2014

Saccharothrix algeriensis NRRL B-24137 produces naturally different dithiolopyrrolone derivatives. The enzymatic activity of pyrrothine N-acyltransferase was determined to be responsible for the transfer of an acyl group from acyl-CoA to pyrrothine core. This activity was also reported to be responsible for the diversity of the dithiolopyrrolone derivatives. Based on this fact, nine dithiolopyrrolone derivatives were produced in vitro via the crude extract of Sa. algeriensis. Three of them have never been obtained before by natural fermentation: acetoacetyl-pyrrothine, hydroxybutyryl-pyrrothine, and dimethyl thiolutin (holomycin). Two acyltransferase activities, acetyltransferase and benzoyltransferase catalyzing the incorporation of linear and cyclic acyl groups to the pyrrothine core, respectively, were biochemically characterized in this crude extract. The first one is responsible for formation of acetyl-pyrrothine and the second for benzoyl-pyrrothine. Both enzymes were sensitive to temperature changes: For example, the loss of acetyltransferase and benzoyltransferase activity was 53% and 80% respectively after pre-incubation of crude extract for 60 min at $20^{\circ}C$. The two enzymes were more active in neutral and basal media (pH 7-10) than in the acidic one (pH 3-6). The optimum temperature and pH of acetyltransferase were $40^{\circ}C$ and 7, with a $K_m$ value of $7.9{\mu}M$ and a $V_{max}$ of $0.63{\mu}M/min$ when acetyl-CoA was used as limited substrate. Benzoyltransferase had a temperature and a pH optimum at $55^{\circ}C$and 9, a $K_m$ value of $14.7{\mu}M$, and a $V_{max}$ of $0.67{\mu}M/min$ when benzoyl-CoA was used as limited substrate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.1
• /
• pp.50-58
• /
• 2013

A facultative bacterium producing cellulolytic and hemicellulolytic enzymes was isolated from the rumen of a native Korean goat. The bacterium was identified as a Bacillus licheniformis on the basis of biochemical and morphological characteristics and 16S rDNA sequences, and has been designated Bacillus licheniformis JK7. Endoglucanase activities were higher than those of ${\beta}$-glucosidase and xylanase at all temperatures. Xylanase had the lowest activity among the three enzymes examined. The optimum temperature for the enzymes of Bacillus licheniformis JK7 was $70^{\circ}C$ for endoglucanase (0.75 U/ml) and $50^{\circ}C$ for ${\beta}$-glucosidase and xylanase (0.63 U/ml, 0.44 U/ml, respectively). All three enzymes were stable at a temperature range of 20 to $50^{\circ}C$. At $50^{\circ}C$, endoglucanse, ${\beta}$-glucosidase, and xylanase had 90.29, 94.80, and 88.69% residual activity, respectively. The optimal pH for the three enzymes was 5.0, at which their activity was 1.46, 1.10, and 1.08 U/ml, respectively. The activity of all three enzymes was stable in the pH range of 3.0 to 6.0. Endoglucanase activity was increased 113% by $K^+$, while $K^+$, $Zn^+$, and tween 20 enhanced ${\beta}$-glucosidase activity. Xylanase showed considerable activity even in presence of selected chemical additives, with the exception of $Mn^{2+}$ and $Cu^{2+}$. The broad range of optimum temperatures (20 to $40^{\circ}C$) and the stability under acidic pH (4 to 6) suggest that the cellulolytic enzymes of Bacillus licheniformis JK7 may be good candidates for use in the biofuel industry.

• Microbiology and Biotechnology Letters
• /
• v.17 no.6
• /
• pp.580-586
• /
• 1989

Penicillium sp. CB-20 was selected for strong polygalacturonase activity among various strains of molds found in soil. The optimum pH for the enzyme activity was 5.0 and optimum temperature was 4$0^{\circ}C$. The enzyme was relatively stable in acidic condition and unstable by heat treatment. The activation energy, Km and V$_{max}$ for the polygalacturonase were 2.499 Kcal/mol, 2.13$\times$10$^{-2}$mol/l, and 104.17 $\mu$mol/min. The activity of polygalacturonase was inhibited by Ag$^{+}$, Cu$^{++}$, Pb$^{++}$, Fe$^{+++}$, $Ca^{++}$, Na$^+$, Mn$^{++}$. The enzyme can be inactivated by the treatment ethylenediamintetra acetic acid, 2,4-dinitrophenol and $H_2O$$_2$. The results indicate the possible involvement of histidine, chelate and terminal amino group as active site. The enzyme was endo-type polygalacturonase.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.2
• /
• pp.195-200
• /
• 1992

Rhizopus oryzae CJ-2114 was selected for its strong polygalacturonase activity among various strains of mold found in soil. The optimum pH for the enzyme activity was 4.0 and optimum temperature was 4$0^{\circ}C$. The activation energy for the polygalacturonase was calculated by Arrhenius equation was 2.048㎉/㏖. The reaction of this enzyme followed typical Michaelis-Menten kinetics with the Km value of 54.05mM with the $V_{max}$ of 13.9m mole/min. The enzyme is relatively stable in acidic condition. The activity of polygalactur-onase was inhibited completely by C $u^{2+}$, P $b^{2+}$ and Z $n^{2+}$, $_Mn^{2+}$ at concentration of 1 mM. The enzyme can be inactivated by the treatment with maleic anhydride and iodine. The results indicate the possible involvement of histidine at active site. When polygalacturonase from Rhizopus oryzae CJ-2114 was reacted with poly-galacturonic acid as a substrate mono-, di-, and oligogalacturonic acid were produced at early and mono-, digalacturonic acid produced at late incubation time. time.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.155-160
• /
• 2011

An animal fat is an attractive biodiesel energy source for its high stability against oxidation and low incomplete combustion ratio due to the high heating value and cetane value. However, it requires a refinery process because of the high content of saturated acid and impurity which increas the boiling point. In this study, the optimum biodiesel synthetic process of lard is suggested. Indeed, we demonstrate new biodiesel production processes to alter conventional process of heating and mixing by applying ultrasonic energy. While the optimum reaction temperature and mole ratio of methanol and lard, when using conventional mixing and heating process, were $55^{\circ}C$ and 12, respectively, the reaction time were reduced to 30 minutes by applying ultrasonic irradiation power of 500 W. The new process applying ultrasonic irradiation yielded synthetic biodiesel properties as followings: 3.34 cP of the viscosity, 37.0 MJ/kg of the caloric value and below 0.25 mgKOH/g of the acidic value, which satisfy biodiesel quality criteria.

• Journal of Forest and Environmental Science
• /
• v.15 no.1
• /
• pp.77-88
• /
• 1999

This experiment was carried out to compare the cultural characteristics of mycorrizal fungi associated with Pinus species, and to form mycorrhizal association with Pinus thunbergii by artificial inoculation of these fungi. Mycorrhizal fungi tested showed great variations in cultural characteristics. Most fungal isolates was best grown on MP medium, except PDA for Lepista sp.(Ln73/92). Hagem for Rhizopogon rubescens(FRI91017), and FDA for Paxillus sp.(Pa60/92). Optimum temperature for these fungi was $25^{\circ}C$, except $30^{\circ}C$ for Pisolithus tinctorius(FRI91004 and Pt1). The range of pH conditions favorable for these fungal isolates were also variable from weak acidic(pH5) to weak alkalic(pH8). Utilization of the carbon sources for these mycorrhizal fungi was different. Fructose, glucose, and maltose were all utilized well, while xylose was not utilized generally. Mycelial growth on the media supplemented with potassium nitrate was better than those on other media with urea, asparagine, or peptone as a nitrogen source, and the poor growth was observed on the media with urea. Pisolithus tinctorius(Pt1) among 7 mycorrhizal fungi artificially inoculated for the mycorrhizal synthesis on pinus thunbergii seedlings in the test tube containing a mixture of peat moss-vermiculite(2:1, v/v) formed mycorrhizae successfully after 3 months. P. tinctorius formed branched and unbranched roots covered with thick fungal mantle and radiating extemal hyphae. Mycorrhizal root cross-sectioned by hand, stained, and observed by Nomarski interference microscope showed typical characteristics of ectomycorrhizae: fungal mantle on epidermal cells and thick Hartig net hyphae around cortex cells.

• Korean Journal of Food Science and Technology
• /
• v.34 no.4
• /
• pp.552-558
• /
• 2002

Polyphenol oxidase from Flammulina velutipes was purified and characterized. Purification of polyphenol oxidase was achieved by ammonium sulfate precipitation, Superdex G-200 gel filtration chromatography, Phenyl superose affinity chromatography, Mono-Q anion exchange chromatography and Superdex S-200 gel filtration chromatography on FPLC. After these purification steps specific activity of purified polyphenol oxidase increased to 199.1 units/mg. Polyphenol oxidase from F. velutipes was composed of a single polypeptide with molecular weight of about 40 kDa. Optimum pH and temperature for the enzyme reaction were found to be 6.0 and $25^{\circ}C$, respectively. The activity of the enzyme gradually decreased at acidic pH between 3 and 5, and the enzyme lost its activity at alkaline pH between 8 and 10. This enzyme exhibited high substrate specificity to o-diphenols. Km-values for L-DOPA and caffeic acid were found to be 3.97 mM and 1.78 mM, respectively. 2-mercaptoethanol, L-ascorbic acid, sodium bisulfite, EDTA and $Mg^{2+}$ inhibited the activity of pholyphenol oxidase and $Cu^{2+}$, $Fe^{2+}$, $Zn^{2+}$ and $Ni^{2+}$ increased enzyme activity. The activity of enzyme was well maintained at $-70^{\circ}C$ for over 4 months, and at $-20^{\circ}C$ for 1 months.