• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.311-324
• /
• 2010

The purpose of this study aims to reveal characteristics of reproduced potteries which made with clays of various chemical compositions in different firing temperatures and thereafter to provide comparative samples for identifying the manufacturing techniques of earthenwares from archaeological excavation by reproducing and characterizing sample under controlled conditions. For this study, various samples of earthenware are reproduced using different types of raw clays at several different firing temperature, followed by physical and structural characterization. Chemical specification were varied from different types of clay, which were calculated by Seger formula, and four different types of clay were selected based on different mole ratio of acidic oxide. The temperatures of firing of 7 samples were varied between $600^{\circ}C$ to $1200^{\circ}C$ at the interval of $100^{\circ}C$ for each sample. The result of analysis revealed that each reproduced earthenware has different chemical compositions divided into two groups: 1. Sample Y(6.10) and Sample G(5.85) clay; 2. Sample H(3.41) and Sample S(2.85) clay. The former which has higher mole ratio of acidic oxide than the latter, shows higher level of rockwell hardness at the same firing temperature. In addition, all four samples presented that as the firing temperature was increased, absorption rates of Y and G were abruptly dropped at $1200^{\circ}C$. Furthermore the more mole ratio of acidic oxide increase, the more microtexture of samples were vitrificated. Such result reveals that mole ratio of acidic oxide influence physical and microtextural characteristics of earthenwares, and it can be used as the comparison data in the understanding of manufacture techniques for the earthenwares of similar chemical composition.

• KSBB Journal
• /
• v.13 no.5
• /
• pp.554-560
• /
• 1998

Biopolymer from alkaline-tolerant Bacillus so. was purified, and its physico-chemical and structural properties were investigated. Crude biopolymer, precipitated by acetone from culture broth was fractionated into two fractions by gel chromatography on Sephadex G-200. Among two fractions, one fraction(PS I), which an acidic biopolymer precipitated by the CPC(cetylpyridinium chloride) treatment was studied further. PS I fraction had carboxyl groups and was positive at color reaction of sugar. PS I fraction also showed UV absorbance at 190-225nm. The purified acidic biopolymer was composed of 4% glucose, 8% glucosamine and 88% glutamic acid. Sugar components of the purified acidic biopolymer seemed to be linked to PGA(polyglutamic acid) which existed in the from of ${\gamma}$-peptide bond. By the results of Smith degradation of sugar components, glucose and glucosamine was bound by 1,3 glocosidic linkage. Therefore, this biopolymer was a glycopeptide, oligosaccaride ${\gamma}$-PGA. We concluded that the equivalent weight and the molecular weight of this biopolymer were estimated as about 171 and 5x105 dalton, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.6
• /
• pp.781-787
• /
• 2014

2-Ketogluconic acid production by Klebsiella pneumoniae is a pH-dependent process, strictly proceeding under acidic conditions. Unfortunately, cell growth is inhibited by acidic conditions, resulting in low productivity of 2-ketogluconic acid. To overcome this deficiency, a two-stage fermentation strategy was exploited in the current study. During the first stage, the culture was maintained at neutral pH, favoring cell growth. During the second stage, the culture pH was switched to acidic conditions favoring 2-ketogluconic acid accumulation. Culture parameters, including switching time, dissolved oxygen levels, pH, and temperature were optimized for the fed-batch fermentation. Characteristics of glucose dehydrogenase and gluconate dehydrogenase were revealed in vitro, and the optimal pHs of the two enzymes coincided with the optimum culture pH. Under optimum conditions, a total of 186 g/l 2-ketogluconic acid was produced at 26 h, and the conversion ratio was 0.98 mol/mol. This fermentation strategy has successfully overcome the mismatch between optimum parameters required for cell growth and 2-ketogluconic acid accumulation, and this result has the highest productivity and conversion ratio of 2-ketogluconic and produced by microorganism.

• Journal of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.404-412
• /
• 1977

Electrochemical reduction of nitrobenzene (${\phi}NO_2$) and its derivatives on Pb electrode was studied by means of galvanostatic measurements and coulometric electrolysis in ethanol-water solvent. In acidic solutions phenylhydroxyl amine and aniline ethanol-water solvent. In acidic solutions phenylhydroxyl amine and aniline were produced while nitrosobenzene and coupled products such as azo-and hydrazobenzene were produced in basic solutions. Nitrosobenzene (${\phi}NO$) was not found to be an intermediate in the reduction reactions of ${\phi}NO_2$ in acidic solutions. No direct coupling between ${\phi}NO\;and\;{\phi}NHOH$ was observed to occur in the electrolyte solutions used. Mechanisms of the production of phenylhydroxylamine and nitrosobenzene are deduced from Tafel slope, pH dependence and reaction order with respect to nitrobenzene. Mechanism for the reduction of substituted nitrobenzenes seems to be identical to that of nitrobenzene.

• Tunnel and Underground Space
• /
• v.26 no.3
• /
• pp.154-165
• /
• 2016

This paper presents experimental results to investigate the affects of acidic solution under loading condition on rock properties. In the experiment, the variations of various rock properties including effective porosity, thermal conductivity, and etc were investigated with different pHs of solution and magnitudes of loading. The results show that the rock property change was increased with low pH under loading. It was predicted that chemical reaction rate would be increased in low pH. Below the crack initiation stress of the rock specimen, the variation of rock property change was reduced with increased loading. It could be explained with the reduced chemical reaction area by the compressional loading if there is no crack generation.

• Journal of Korea Soil Environment Society
• /
• v.3 no.1
• /
• pp.55-63
• /
• 1998

This study investigates the contamination mechanism of soil by drainages including acid rains around mining waste sites, and suggests the quantitative methods of prevention against soil contaminations and its alternatives. For these purposes, the dissolution of arsenic in soils, which is one of toxic heavy metals, has been examined experimentally using the artificial acidic solution. Also, in order to prevent dissolution of arsenic by acid rain, the effects of limestone for the neutrality method on the soil were investigated. The arsenic in soil specimen was dissolved by strong acidic solution below pH1.0. The maximum amount of dissolved arsenic increased with decreasing pH value. Furthermore, it was found very effective to use limestones for the neutrality method. The neutralization of limestones in acidic solution was found to follow the equation of chemical reaction-controlling formulation in unreacted-core models.

• Journal of the Korean Chemical Society
• /
• v.57 no.3
• /
• pp.361-364
• /
• 2013

A modified synthetic approach to the synthesis of heterocyclic food mutagens, 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PHIP) and 2-amino-1,6-dimethylimidazo[4,5-b]pyridine (DMIP) is reported. This route highlights an optimized palladium catalysed Buchwald cross-coupling of 2-halo-1-methyl-imidazo[4,5-b]pyridine with benzophenoneimine followed by acidic hydrolysis to yield compound 7. Using finely tailored conditions, Suzuki cross-coupling reactions with highly efficient catalytic systems were performed as the final step on 8 to introduce the aryl group and methyl group on the heterocyclic core.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.5
• /
• pp.397-410
• /
• 1997

An annular denuder filter pack sampling system (ADS) was used to collect acidic air pollutants in Pusan. During the study period (from June 1995 to November 1995), forty eight samples were collected every 12 hours starting from 6:00 in the morning. These samples were devided into two sets of data for day (6:00 a.m.-6:00 p.m.) and night (6:00 p.m.-6:00 a.m.). The chemical species were analyzed for HN $O_3$, HN $O_2$, S $O_2$ and N $H_3$ in the gas Phase, and N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$ and N $H_4$$^{+}$ in the particulate phase. The mean concentrations measured from this study were 0.24, 1.91, 30.07 and 4.24 $\mu\textrm{g}$/㎥ for HN $O_3$, HN $O_2$, S $O_2$ and N $H_3$, respectively. The mean concentrations of N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$ and N $H_4$$^+{\ulcorner}$ were 1.95, 7.36 and 3.48 $\mu\textrm{g}$/㎥, respectively. The mean concentrations of gaseous species except for HN $O_2$ were higher in daytime than in nighttime, but the reverse was true in the particulates except for N $H_4$$^{+}$. +/..

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.3
• /
• pp.305-315
• /
• 1999

The annular denuder system(ADS) was used to determine characteristics of acidic air pollutants and $PM_{2.5}$ species in Seoul-metropolitan areas. All measurements were done simultaneously in downtown(Kwanghwamun, Mullae, Chamshil, Ssangmun dongs) and outskirts(Puch n, Kuri cities) during four seasons. The samples were analyzed using ion chromatography for gas-phase matters(HCl, $HNO_2$, $HNO_3$ and $SO^2$) and particulate phase matters($Cl^-$, $NO^{2-}$, $NO_3^-$, $SO_4^{2-}$, $Na^+$, $NH_4^-$ and $Ca^{2+}$) and was measured fine particles($PM_{2.5}$). The seasonal mean concentrations of HCl, HNO2, HNO3 and SO2 in downtown and outskirt areas were very similar. All chemical species monitored from this study showed seasonal variations. Nitric acid(HNO3) and Nitrous acid(HNO2) were showed higher concentrations during the summer. $PM_{2.5}$, $SO_4^{2-}$, $NH_4^-$, $NO_3^-$ and $Cl^-$ in the particulate phase matters were higher levels during the winter months. The concentrations of these components were 54.8, 3.82, 2.49, 1.80 and 1.02$\mu\textrm{g}$/㎥, respectively.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.3
• /
• pp.138-143
• /
• 2007

The effects of texturing and anti-reflection coating on the reflection properties of multi-crystalline silicon solar cell have been investigated. The chemical solutions of alkaline and acidic etching solutions were used for texturing at the surface of multi-crystalline Si wafer. Experiments were performed with various temperature and time conditions in order to determine the optimized etching condition. Alkaline etching solution was found inadequate to the texturing of multi-crystalline Si due to its high reflectance of about 25%. The reflectance of Si wafer texturing with acidic etching solution showed a very low reflectance about 10%, which was attributed to the formation of homogeneous. Also, deposition of ITO anti-reflection coating reduced the reflectance of multi-crystalline si etched with acidic solution($HF+HNO_3$) to 2.6%.