• Journal of the Korean Chemical Society
• /
• v.5 no.1
• /
• pp.56-59
• /
• 1961

Ion exchange procedure was studied for the separation of thorium from the acidic solution obtained by means of decomposition of monazite with alkali solution. Present cation exchange method consists of adsorption of cations from the sample solution (ca. 0.6N HCl acidic) onto Amberlite IR-120 resin, elution of all of the rare earth cations with 700 ml. of 2N Hydrochloric acid, and recovery of the thorium by elution with 200ml. of 6N sulfaric acid. Thorium recovery by the ion-exchange method mentioned above, was quantitative, and it is concluded that this ion-exchange method may be used not only for industrial separation of thorium from rare earths but also for quantitative determination of thorium with relative error, ${\pm}1.0.$.

• Nuclear Engineering and Technology
• /
• v.32 no.6
• /
• pp.531-536
• /
• 2000

The extraction of precious metals from aqueous solutions is performed by using a photoredox reaction with a Q-switched Nd:YAG laser. The metallic silver was efficiently precipitated and extracted from the silver nitrate solution by laser photolysis. An optimum reaction condition for silver extraction was determined by adjusting various experimental factors such as type of reducing agent, type of acids and reaction time. The composition of the reaction product was analyzed and it was identified as metallic silver, not other molecular types. The photoreaction of chromium(III) chloride in an acidic aqueous solution was also investigated. The 355 nm laser light was better suited for the reaction of silver nitrate as well as chromium(III) chloride in an acidic solution compared to the 532 nm light.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.1
• /
• pp.54-58
• /
• 1990

Acid-base equilibria and spectroscopic properties of diazepam and chlorodiazepoxide were investigated in sodium dodecyl sulfate (SDS) micellar solutions as functions of pH. The results were compared with the behaviors in homogeneous aqueous media. The presence of SDS increased the $pK_a$ of chlorodiazepoxide to 6.3 from 4.7, while it has little effect on the $pK_a$ of diazepam. The acidic protonated form of diazepam was moderately fluorescent when the solution was excited at 350 nm, and emissnion intensity of the species was enhanced about 5 fold by the presence of SDS. On the other hand, the acidic solution of chlorodiazepoxide was non-fluorescent, but the neutral solution of the compound was fluorescent upon excitation at 350 nm. The emission peak of the neutral chlorodiazepoxide shifted to shorter wavelength region without significant change in the emission intensity upon the addition of SDS. Procedures for assay of the individual drugs from their mixture by the use of SDS micelle were discussed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.2
• /
• pp.263-269
• /
• 2002

This research was conducted to establish the efficient use of the colored rice bran fur dyeing textiles. To investigate the fabric dyeability of the colored rice bran extract, the anthocyanin pigments were extracted with water of different temperature ranges of 40 ~ 8$0^{\circ}C$ and were dyed on silk fabrics with different dyeing temperature $25^{\circ}C$~6$0^{\circ}C$, at acidic pH and neutral pH, respectively. Aluminum chloride was preheated with mordant K/S value and dyeing fastness of dyed silk fabrics were examined. The anthocyanins of the colored rice bran were stable and red color at acidic pH, red purple or purple blue at neutral pH, but unstable, blue color at alkaline pH. If extracting temperature and dyeing temperature of dyeing solution were higher, the dyeability was high, but the color of dyed fabric showed red tone. When extracting temperature was 8$0^{\circ}C$ and dyeing temperature of dyeing solution was 6$0^{\circ}C$, the dyeability was best. Without mordant, the dyeability of silk fabrics was higher in acidic pH than in neutral pH solution. With mordant, the dyeability was higher than without mordant, and also higher in acidic pH. Pretreatment of aluminum chloride resulted in the increase of color intensity and stability. The laundering fastness of dyed fabrics was good from grade 5 to grade 3-4. Because of the anthocyanins sensitivity on light radiation, the light fastness of dyed fabrics was poor from grade 3 to grade 1-2.

• Journal of Power System Engineering
• /
• v.20 no.3
• /
• pp.43-50
• /
• 2016

The current study was carried to understand the immersion characteristics and mechanical properties of heat treated stainless steels. Stainless steels (STS310S, STS316L and STS347H) were thermally treated at temperature ranges from 480 to $720^{\circ}C$. Nominal stress was determined to be slightly different depending on the heat treatment temperature. The Cr concentration in STS310S was increased at the temperatures of 600 and $660^{\circ}C$, whereas the Cr concentration in STS316L and STS347H were almost constant regardless of heat treatment temperatures. Vickers hardness was found larger as a thermal treatment temperature was increased. Immersion tests of the stainless steels were also carried out in acidic solution and alkaline solution for 240 hours. Among three different stainless steels, the pitting was detected in the acidic solution, not in the alkaline solution. The pitting of STS347H was occurred more than STS310S and STS316L.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.421-426
• /
• 2001

The pneumatic classification and acidic leaching behaviors of phosphor sludge have been examined to establish the recycling system of rare earth components contained in waste fluorescent lamp. At first, separation characteristic of rare earth components and calcium phosphate in phosphor sludge was investigated by pneumatic classification. After pneumatic classification of phosphor sludge, rare earth components were leached in various acidic solutions and sodium hydroxide solution. For recovery of soluble component in leaching solution, rare earth components were separated as hydroxide and oxalate precipitations. The experimental results obtained are summarized as follows: (1) In classification process, rare earth components in phosphor sludge were concentrated to 29.3% from 13.3%, and its yield was 32.9%. (2) In leaching process, sulfuric acid solution was more effective one as a leaching solvent of rare earth component than other solutions. Y and Eu components in phosphor sludge were dissolved in sulfuric acid solution of 1.5 k㏖/㎥, and other rare earth components were rarely dissolved in leaching solution. Leaching degrees of Y and Eu were respectively 92% and 98% in the following optimum leaching conditions; sulfuric acid concentration is 1.5 k㏖/㎥ , leaching temperature 343 K, leaching time 3.6 ks and pulp concentration 30 kg/㎥. (3) Y and Eu components of phosphor sludge contained in waste fluorescent lamp were, effectively recovered by three processes of pneumatic classification, sulfuric acid leaching and oxalate precipitation methods. Their recovery was finally about 65 %, and its purity was 98.2%.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.549-554
• /
• 2002

Thermosensitive poly(organophosphazenes) bearing methoxy-poly(ethylene glycol) (MPEG) and alkylamines as substituents have been synthesized and characterized by elemental analysis, NMR spectroscopy, GPC, and DSC. All the polymers exhibited crystallinity, which was probably induced by the MPEG side chain of the polymers. All the polymers exhibited the lower critical solution temperature (LCSTs) in the range of 28 to $94^{\circ}C$ depending on several factors such as mole ratio of the substituents, kinds of PEG and alkylamines. The higher content of MPEG and shorter chain length of alkylamines of the polymers afforded the higher LCST. The LCSTs of the polymers exhibited almost concentration-independent behavior in the range of 3-30 wt % of the polymers in aqueous solutions. The polymers showed the higher LCSTs in the acidic solutions than in the neutral and basic solutions. The ionic strength of the polymer solution affected the LCST, which decreased with increased NaCl concentration. The polymer bearing almost equimolar substitutuents with the -N-P-N- unit has shown the LCST more sensitive to NaCl and pH than that with the -N-P-O- unit. The polymers were found to degrade in acidic solution but be very stable in alkali solution as well as in the buffer solution of pH 7.4.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.11
• /
• pp.1208-1210
• /
• 1997

• BMB Reports
• /
• v.35 no.5
• /
• pp.488-493
• /
• 2002

IgY was separated from a hen's egg yolk that was immunized with Helicobacter pyroli. The anti-H. pyroli IgY activity at acidic pH and the suppressive effect of polyol on acid-induced inactivation of IgY were investigated. Sorbitol and xylitol were used as polyols. IgY was quite stable at pH 5~7. Irreversible inactivation of IgY was observed at pH below 4, and proceeded rapidly at pH below 3. The acid stability of IgY was enhanced in the presence of 30% sorbitol or above. In a 50% aqueous sorbitol solution, an acid-induced inactivation was almost completely suppressed at pH 3. However, the improvement of IgY activity was not observed in the aqueous xylitol solution. IgY showed almost the same activity as native IgY when sucrose was substituted for sorbitol. On the other hand, the xylitol replacement with sucrose did not enhance the acid stability of IgY. The acid-induced inactivation of IgY was related to tryptophyl fluorescence. Fluorescence emission spectra suggested that structural changes near the tryptophan residues may occur under acidic conditions. An increase in sorbitol concentration induced a blue shift. The fluorescence emission of IgY in a 50% sorbitol solution had a peak at 330 nm, which was the same emission peak that was exhibited by native IgY. Sorbitol could, therefore, be used as a good stabilizer of IgY under acidic conditions.

• Tunnel and Underground Space
• /
• v.26 no.3
• /
• pp.154-165
• /
• 2016

This paper presents experimental results to investigate the affects of acidic solution under loading condition on rock properties. In the experiment, the variations of various rock properties including effective porosity, thermal conductivity, and etc were investigated with different pHs of solution and magnitudes of loading. The results show that the rock property change was increased with low pH under loading. It was predicted that chemical reaction rate would be increased in low pH. Below the crack initiation stress of the rock specimen, the variation of rock property change was reduced with increased loading. It could be explained with the reduced chemical reaction area by the compressional loading if there is no crack generation.