• 한국균학회지
• /
• 제22권1호
• /
• pp.8-30
• /
• 1994

탄수화물(포도당, 서당, raffinose)을 각각 처리한 배지에서 배양한 진균류(Aspergillus phoenicis, Rhizopus acidus, Candida albicans)의 세포에서 일어나는 지질대사 특히 인지질 및 지방산 조성에 미치는 영향을 분석하였다. 서당은 Aspergillus와 Candida의 생장에, 포도당은 Rhizopus의 생장에 최적의 당이었다. 포도당은 Aspergillus와 Rhizopus total lipid 합성에, Raffinose는 Candida total lipid 합성에 가장 유용한 것으로 조사되었다. 포도당 처리는 Aspergillus의 Pl를 73.7%, Rhizopus의 PC를 292% 증가시켰다. 서당 처리는 Aspergillus의 Pl를 112%, Rhizopus와 Candida의 PC의 함량을 77.7%와 71.8%의 촉진 현상을 보여 주었다. Raffinose 처리는 Aspergillus에서 PC의 함량을 29.5% 증가시컸고, PE의 함량은 Rhizopus에서 50.9%, Candida에서 49.1% 촉진하였다. Aspergillus와 Candida의 당 처리구에서 PC와 PE를 구성하는 주요 지방산은 주로 oleic acid와 linoleic acid이었다. 인지질을 구성하는 주요 지방산으로 Aspergillus에서는 palmitic acid와 linoleic acid, Rhizopus에서는 palmitic acid, Candida에서는 palmitic acid, oleic acid, linoleic acid로 조사되었다. 이들 3진균류가 당 처리시 인지질 합성에 공통으로 이용하는 주요 지방산은 palmitic acid로 분석되었다.

• 한국잠사곤충학회지
• /
• 제26권2호
• /
• pp.26-31
• /
• 1984

In general, acid dyes been used for silk dyeing, but acid dyed silk shows weakness in color fastess, To improve this defect, the silk dyed with Acid Mordant Blue 13 was treated with chromes salts solution. Some mechanical properties and dyeing behaviors of the chrome mordant with dyed silk fabric were tested in this work. The tensile strength of silk fabric treated with chrome salts solution was decreased as the duration of treatment was increased. The mean rate constant (K) of photo-degradation was 1.019, and 1.047 after treated with Cr (III) and Cr (Ⅵ), respectively, whereas it was 1.304 in untreatment. The washing fastness of silk fabric also was improved by treatment with mordant and it was 3rd-4th grade and 4th grade when silk was treated with Cr (III) and Cr (Ⅵ), respectively, while untreatment gave 1st grade. The colour of dyed silk fabric was 2.5RP.3/10, but it was 5PB.4/3 and 5PB. 4/4 when the silk fabric was treated with Cr (III) for two hours and with Cr (Ⅵ) for one hour at 90$^{\circ}C$, respectively.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.262-269
• /
• 2006

In this paper, the effects of low temperature plasma (LTP) treatment on the dyeing properties of the wool fiber were studied. The wool fibers were treated with oxygen plasma and three types of dye that commonly used for wool dyeing, namely: (i) acid dye, (ii) chrome dye and (iii) reactive dye, were used in the dyeing process. For acid dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased but the final dyeing exhaustion equilibrium did not show any significant change. For chrome dyeing, the dyeing rate of the LTP-treated wool fiber was also increased but the final dyeing exhaustion equilibrium was only increased to a small extent. In addition, the rate of afterchroming process was similar to the chrome dyeing process. For the reactive dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased and also the final dyeing exhaustion equilibrium was increased significantly. As a result, it could conclude that the LTP treatment could improve the dyeing behavior of wool fiber in different dyeing systems.

• 한국식품위생안전성학회지
• /
• 제11권1호
• /
• pp.51-55
• /
• 1996

As a preliminary experiment to investigate the effect of ozone sterelization on the ginseng powder, the changes of fatty acid composition and organic acid content and sensory properties in ginseng powder treated with ozone was investigated. Ginseng powder was treated with 0.5 ppm ozone for 24 hours and 48 hours, respectively. With increase in ozone treatment time, the content of crude lipid and increase. Contents of unsaturated fatty acid-linolenic acid, linoleic acid, and oleic acid, etc.-decreased with ozone treatment time, whereas saturated fatty acid or same number-stearic acid-increased odor, bitter taste, roasted taste and sweet taste were thiner with ozone treatment times, but pungent taste was thicker with those treatment. These changes of ordors and tastes of ginseng powder with ozone treatment were predicted by oxydation of lipids, flavor components and saponins.

• 한국결정성장학회지
• /
• 제16권3호
• /
• pp.106-111
• /
• 2006

The objective of this paper is to compare the surface features of two kinds of nano-porous activated carbon fiber (NPACF) treated with potassium and the variation of their properties by phosphoric acid pre-treatment. X-ray diffraction (XRD) patterns indicate that NPACF containing potassium species show better performance for potassium and potassium salts by pre-treatment with phosphoric acid. In order to present the causes of the differences in surface properties and specific surface area after the samples were treated with phosphoric acid, pore structure and surface morphology are investigated by adsorption analysis and SEM. For the chemical composition microanalysis for potassium loading of the NPACF pre-treated with phosphoric acid, samples were analyzed by EDX. Finally, the type and quality of oxygen groups are determined from the method proposed by Boehm.

• 동의생리병리학회지
• /
• 제23권6호
• /
• pp.1379-1384
• /
• 2009

The purpose of this study is to investigate the effect of water extract from Artemisiae Argi Folium Fermented with Lactobacillus pentosus (AFL) on hydrogen peroxide production within human hepatocyte HepG2 cells treated with gallic acid, EtOH, nicotine, acetaminophen, and acetaldehyde. AFL (0~400 ug/mL) was treated with gallic acid, EtOH, nicotine, acetaminophen, and acetaldehyde. And the intracellular productions of hydrogen peroxide were measured by dihydrorhodamine 123 (DHR) assay. AFL showed the restoration of the intracellular productions of hydrogen peroxide which were reduced by gallic acid, EtOH, nicotine, acetaminophen, and acetaldehyde in HepG2 Cells. AFL could be supposed to have the hepatoprotective effect related with hepatocytologic signaling activity against gallic acid, EtOH, nicotine, acetaminophen, and acetaldehyde.

• 한국식품과학회지
• /
• 제24권4호
• /
• pp.315-319
• /
• 1992

제주도 다원에서 생산된 녹차 생엽을 적채 시기별(1번차, 2번차, 3번차)로 혐기적으로 처리하여, ${\gamma}-aminobutyric$ acid(GABA) 및 기타 주요성분의 함량변화를 측정한 결과 차엽의 질소가스 치환처리 및 진공처리 모두 GABA와 alanine의 함량은 현저하게 증가한 반면에 glutamic acid는 현저하게 감소하였다. 또한 theanine, arginine, caffein 및 polyphenol의 함량은 거의 변화가 없었으며, vit.C의 함량은 혐기처리 시간의 경과에 따라 조금씩 감소하는 것으로 나타났다. 혈압강하작용 성분인 GABA의 생성량은 원엽의 아미노산의 함량, 특히 glutamic acid의 함량에 비례하였으며, 최적 혐기처리 시간은 약 12시간으로 나타났다. 한편, 차엽의 혐기적 처리조건에 있어서 질소가스 치환 처리와 진공처리 사이의 효과에 있어서의 차이는 거의 없었다.

• 한국가정과학회지
• /
• 제9권1호
• /
• pp.43-50
• /
• 2006

The main colorant of Chelidonium majus extracts is a berberine which shows relatively good dyeability onto silk fabrics in the appropriate dyeing conditions without mordant, But cotton fabrics are difficult to dye with berberine because of the low substantivity the cationic to cellulosic fibers. we treated cotton fabrics using three types of polycarboxylic acid, DL-malic acid, citric acid, 1,2,3,4-butanetetracarboxylic acid(BTCA) to increase dyeability of Chelidonium majus extracts onto cotton fabrics. As a result the cotton fabrics treated with polycarboxylic acid could be dyed with Chelidonium majus extracts and also showed yellow vividly. The dye uptake were increased with increasing the number of carboxy groups. And so dye uptake resulted the largest in the BTCA solutions which have four carboxylic groups in the molecular unit. The optimal dyeing temperature a of Chelidonium majus extracts onto polycarboxylic acid treated cotton fabrics were $60^{\circ}C$. The dye equilibrium was reached 20 minutes after dyeing. Neutral pH of dye solutions showed in higher K/S value than acidic or alkaline conditions. But the colorfastness to washing and light according to polycarboxylic acid treat was not enhance.

• Restorative Dentistry and Endodontics
• /
• 제19권1호
• /
• pp.45-63
• /
• 1994

128 freshly extracted human molars were used to study the interaction between dentinal smear layer removal with various agents, and the shear bond strength of a light cured glass ionomer cement to dentin. It was proposed that the removal of smear layers using acidic cleaners followed by incorporation of Fe mordant with dentin could enhanced the infiltration of monomer component in light curing glass ionomer cement and resulted in a high bond strength. For the first treatment process for removal of smear layers on the surfaces of dentin, 50 % citric acid, 10% maleic acid and 10 % phosphoric acid were used, and for the second treatment process, 15% ferric chloride, 6.8% ferric oxalate or 30% potassium oxalate were used. Distilled water was used as a control. After double sequential treatment on dentin, a light curing glass ionomer cement was bonded to dentin. After being immersed in water at 31'C for 24 hours, shear bond strengths were measured Instron testing machine(Model No.4202, USA). Surface changes were also observed using SEM (Hitachi, S-2300, Japan) after treatment process with each agents. The following conclusions were drawn : 1. Dentin surface cleaned with maleic acid and treated with ferric oxalate showed the highest bond strength with light curing glass ionomer cement. 2. Bond strengths of glass ionomer cement to dentin treated with maleic acid or citric acid were the highest, and that treated with phosphoric acid showed the lowest. 3. The effect of ferric oxalate on shear bond strength to dentin was always higher than that of ferric chloride. 4. The smear layers were clearly removed and the orifices of dentinal tubules were opened widely by the citric acid, maleic acid and phosphoric acid. 5. The orifices of dentinal tubules opened after using the first solution were closed with the treatment of ferric chloride. 6. The precipitate like crystals were formed on dentin surfaces and tubules, but a significant decrease in bond strength of glass ionomer cement to dentin surface treated with potassium oxalate.

• Restorative Dentistry and Endodontics
• /
• 제18권1호
• /
• pp.73-83
• /
• 1993

산 처리방법에 따른 상아질 접착을 평가하고 표면처리 후의 상아질 표면의 성상변화 및 파단면의 양상을 관찰하기 위해 발거된 구치 에 10% polyacrylic acid (GC Dental Industrial Corp., U. S. A.), 10 % 인산(Bisco Inc., U. S. A.) 및 10-3 용액 (Parkell Bio-Materials, U. S. A.)을 사용하여 상아질 표면을 처리하고 모든 시편에 상아질 접착제인 All Bond 2$^{(R)}$(Bisco Inc., U.S.A.)를 도포하였으며 복합레진 (Silux Plus$^{(R)}$, 3M Co., U.S.A.)을 첨가한 후 접착강도를 측정하고 상아질 표면 및 파단면을 주사 전자현미경으로 관찰, 비교하여 다음과 같은 결과를 얻었다. 1. 접착강도는 상아질 표면을 산 처리한 군이 무처리한 대조군에 비해 높게 나타났고, 산처리를 시행한 군들 간에는 10-3 용액으로 처리한 군이 가장 높았으며 10% 인산으로 처리한 군, 10% polyacrylic acid로 처리한 군의 순이었다(p<0.01). 2. 상아질 표면의 관찰에서, 무 처리의 상아질 면은 상아세관이 개방되지 않은 채 도말층으로 덮혀 있었고, 10% polyacrylic acid로 처리한 상아질 면은 도말충이 제거되고 상아세관이 개방되어 있었으나 상아세관 내에 smear plug이 일부 남아 있었으며, 10% 인산또는 10-3 용액으로 처리한 상아질 면은 도말층 및 smear plug이 모두 제거되고 상아세관이 완전히 개방되어 있음이 관찰되었다. 3. 파단면의 관찰에서, 무 처리군에서는 도말층 내에서 파단이 일어났으며, 10% polyacrylic acid로 처리한 군에서는 상아세관 내 잔존 레진 tag이 관찰되지 않았으나 10% 인산 및 10-3 용액으로 처리한 군에서는 상아세관 내의 잔존 레진 tag이 관찰되었다. 4. 파단 양상에 있어서, 접착강도가 큰 군일수록 응집성 파단의 빈도가 증가되어 나타났으며, 각 시편에서 구한 접착강도와 응집 파단율의 상관 계수는 0.71이었다.