• Journal of Periodontal and Implant Science
• /
• 제34권4호
• /
• pp.699-709
• /
• 2004

The present study was performed to evaluate histomorphological difference in various surface-treated implants in beagle. Implants($Implantium^{(R)}$, Dentium Co. Korea) with pure titanium machined surface, acid treated surface, and $Al_2O_3(50{\sim}100\;{\mu}m)$blasted with acid treated surface were used in this study. All mandibular premolars of $1.5{\sim}2$ year old male beagle dogs were extracted. At 3 months after extraction, the implants(${\Phi}$ 4mm, l 6mm) were installed. The beagle were sacrificed at 1, 3 months after installation and then tissues including implants were prepared for non-decalcified specimens. These specimens were analyzed comparatively under light microscope. The results of this study were as follow 1. Higher rate of osseointegration were showed in the $Al_2O_3(50{\sim}100\;{\mu}m)$blasted with acid-treated surface. 2. Increased osseointegration were showed in the $Al_2O_3(50{\sim}100\;{\mu}m)$blasted with acidtreated surface with time. 3. Higher maturation of integration were showed in the $Al_2O_3(50{\sim}100\;{\mu}m)$blasted with acid-treated surface. In conclusion, surface treatment of $Al_2O_3blasted$ with acid might be considered to shorten healing time and improve success rate as increasing contact of implant and bone.

• Journal of Photoscience
• /
• 제3권1호
• /
• pp.1-7
• /
• 1996

When cucumber (Cucumis sativus L.) cotyledon discs were floated on $\delta$-aminolevulinic acid, oxyfluorfen, or rose bengal solution under light condition following 20 h dark incubation, rapid electrolyte leakage from the tissues occurred. The electrolyte leakage from the tissues was dependent on the compounds treated, their concentrations, and the duration of light exposure to the tissues. Dark incubation before exposure to continuous white light enhanced electrolyte leakage from the tissues treated with the compounds and reduced lag period for the activity of the compounds. Electrolyte leakage from the treated tissues was greatly influenced by the light intensity to which they were exposed. Higher light intensities stimulated electrolyte leakage and reduced lag period. Porphyrin biosynthesis inhibitors, gabaculine and 4,6-dioxoheptanoic acid, completely inhibited electrolyte leakage from the oxyfluorfen-treated tissues. Protection against the activity of $\delta$-aminolevulinic acid from electrolyte leakage was complete with 4,6-dioxoheptanoic acid, but not with gabaculine. However, gabaculine and 4,6-dioxoheptanoic acid gave no such protection against rose bengal activity. In summary, our results indicate that $\delta$--aminolevulinic acid, oxyfluorfen, and rose bengal exert their effects by causing electrolyte leakage from the treated tissues in a similar manner, except that oxyfluorfen has an apparent lag period for its action on electrolyte leakage increase. All above compounds require preincubation of treated tissues in darkness and subsequent light exposure with a high intensity for their maximal activities. Our results also support that in the presence of light, $\delta$-aminolevulinic acid and oxyfluorfen cause cellular damage through the indirect generation of singlet oxygen from accumulated tetrapyrroles of porphyrin pathway, whereas rose bengal causes cellular damage through the direct generation of singlet oxygen.

• 한국초지조사료학회지
• /
• 제35권3호
• /
• pp.201-206
• /
• 2015

An experiment was carried out to determine the homofermentative activity of Lactobacillus plantarum KCC-10 and KCC-19 on the ensiling of whole crop barley (WCB). The crude protein in the silages was slightly higher in the KCC-10 and KCC-19 treatments compared to the control, but there was no significant difference between the two inoculant-treated silages. Nutrient parameters such as acid detergent fiber, neutral detergent fiber and in vitro dry matter digestibility in L. plantarum KCC-10 and KCC-19 treated silages did not differ from those in the control silage. The lactic acid content increased in KCC-10 and KCC-19 treated silage when compared with the control silage but the contents of acetic acid and butyric acid produced in KCC-10 and KCC-19 treated silages were similar with the control silage. Further, the number of lactic acid bacteria (LAB) in KCC-10 treated silage demonstrated a significant increase when compared to the control. Especially, KCC-19 treated silage showed greater lactic acid bacterial growth potential. Other microbes such as yeast and fungi were not detected in KCC-10 and KCC-19 treated WCB silages. Hence, this study suggests that the addition of L. Plantarum KCC-10 and KCC-19 to the WCB silage can improve fermentation quality for the production of high-quality silage.

• 한국식품위생안전성학회지
• /
• 제10권3호
• /
• pp.147-153
• /
• 1995

The ethanol extract from the root bark of Morus alba showed the strongest antimicrobial activity on the growth of almost all the tested microorganisms which were food-borne pathogens and food-related microorganisms. Therefore, fatty acid composition, amino acid composition and shape change of microorganisms treated with the ethanol extract from the root bark of Morus alba were examined. In effects of treatment with the ethanol extract on the fatty acid compositions of B. subtilis, S. aureus and E. coli, fatty aicd compositions such as hexadecanoic acid (16:0) and octadecanoic acid (18:2) of the tested strains were increased but pentadecanoic acid (15:0) heptadecanoic acid (17:0) and acid (16:1) and octadecenoic acid (18:1) of E. coli were decreased. The ethanol extract did not significantly affect the aminn acid composition of the tested strains. Transmission electron micrographs of microorgani는 treated with the ethanol extract exhibited morphological changes that irregularly contracted cell surface in S. aureus and destructed cell walls in B. subtilis and E. coli.

• Journal of Ginseng Research
• /
• 제33권3호
• /
• pp.194-198
• /
• 2009

본 연구에서는 수삼을 식품에 쓰이는 산화 방지제인 ascorbic acid와 citric acid로 처리하여 홍삼을 제조한 후 활성성분인 페놀화합물과 진세노사이드의 추출물내 함량 변화를 HPLC를 이용하여 살펴보았다. 분석결과 citric acid 처리 홍삼에서 esculetin과 quercetin 함량이 무처리 홍삼에 비하여 각각 3.5 배, 2.0 배 증가하였고 ginsenoside 함량 역시 citric acid 처리시의 Rg$_3$, Rd, Rh$_2$ 증가량이 ascobic acid 처리시에 비하여 높았다. 따라서 인삼추출물의 이들 특정활성성분 강화를 위하여는 citric acid 처리가 효과적인 것으로 판단된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.670-670
• /
• 2007

• Journal of the Korean Wood Science and Technology
• /
• 제15권3호
• /
• pp.56-67
• /
• 1987

Plywoods used for construction as a decorative interior material are inflammable and can make fire accidents, causing destruction of human life and property. Therefore, it is indeed required to make fire-retardant treated plywood. In this study, 3.7mm yellow meranti plywoods were soaked in 18% boric acid solutions and tap water by hot-cold bath for 1/2, 2/2, 4/2, 6/2 hours and redrying of treated plywoods was carried out by press drying at the platen temperature of 110, 130, 160, $180^{\circ}C$ and then it was conducted to investigate solution absorption, drying rates, dynamic young's modulus. specific gravity and fire-retardant factors such as burning point, flame spread length. flame exhausted time, back side carbonized area and weight loss by treating time, treating solutions and platen temperature. The results are as follows; 1. When plywood was impregnated with the hot bath temperature of $70^{\circ}C$ for 1. 2, 4, 6 hours and the cold bath temperature of $15^{\circ}C$ for 2 hours respectively, retentions of boric acid were 1.565, l.597, 1.643, 1.709kg/$(30cm)^3$ and all of them exceeded the minimum retention [1.125kg/$(30cm)^3$] even in the shortest treatment. 2. In hot-cold bath method for 1/2 hours, the drying rates of treated plywood remarkably increased with the extension of platen temperature of 110, 130, 160, $180^{\circ}C$ and the values of boric acid treated plywood were 5.900, 10.196, 45.42, 54.958m.c%/min and the values of water treated plywood were 6.014, 12.373, 46.520, 55.730m.c%/min and drying rates of water treated plywood were faster than those of boric acid treated plywood. 3. The values of boric acid treated plywoods in dynamic young's modulus were widely higher than those of water treated plywoods. And it can be observed that there were highly significant differences for treating time between dynamic young's modulus, and the values of boric acid plywoods increased with the extension of treating time but on the contrary water treated plywoods were decreased values with prolonged time 4. It was observed that there were highly significant differences for platen temperature between dynamic young's modulus. When the values of water treated plywoods in dyna nic young's modulus were abruptly decreased according to the rise of platen temperature. boric acid treated plywoods showed rather increased values at $160^{\circ}C$ of platen temperature. And in 2- way interactions, there were also highly significant for dynamic young's modulus between treating time x treating solutions and platen temperature x treating solutions. 5. Correlation coefficients of fire-retardant factors were shown in table 5. It could be recognized that there were close correlations between the treating solutions and burning point, flame spread length, back side carbonized area, flame exhausted time and weight loss, but there was no correlation between fire-retardant factors and treating time and platen temperature. 6. From table 6, it can be observed that there were highly significant differences for burning point, flame spread length, flame exhausted time, back side carbonized area, weight loss between treating solutions. And in 2-way interactions, there were highly significant for burning point, flame spread length, weight loss between treating time $\times$ treating solutions.

• 한국미생물·생명공학회지
• /
• 제27권3호
• /
• pp.246-251
• /
• 1999

To extend the storage period and to inhibit contamination of Kimchi by Escherichia coli, conditions of Kimchi brining and effects of the fermentation starter, halophilic Lactobacillus HL-48 were investigated. Optimum brining condition for Kimchi was accomplished in 15% NaCl and at pH2.5-3.0 adjusted by lactic acid. Starter-treated Kimchi showed pH 4.2 after 18hr fermentation, while the pH of starter-untreated Kimchi resulted in 3.3. After 36hr fermentation, the number of E. coli in starter-treated Kimchi was found clearly to decrease and not detected macroscopically, but contamination of E. coli (5.3$\times$103CFU/ml) was observed in starter-untreated sample. Organic acids in Kimchi contained organic acids such as oxalic acid, citric acid, malic acid and lactic acid. among ther, lactic acid content was remarkably high in the early fermentation stages. However, from 24hr fermentation, lactic acid content of starter-untreated Kimchi was higher than that of starter-treated Kimchi.

• 대한의생명과학회지
• /
• 제28권2호
• /
• pp.101-108
• /
• 2022

High-fat diet (HFD)-fed ovariectomized (OVX) female mice were used as an animal model of obese postmenopausal women. We investigated the effects of ascorbic acid on the histological changes induced in the liver. Plasma alanine aminotransferase levels and liver weights were higher in mice fed an HFD for 18 weeks than in mice fed a low-fat diet, effects that were inhibited by ascorbic acid. Similarly, mice fed an ascorbic acid-supplemented HFD had less hepatic lipid accumulation than did mice fed an HFD alone. Moreover, administration of ascorbic acid reduced inflammatory cells, including mast cells and CD68-positive cells, and inflammatory foci in the liver and inhibited hepatocyte ballooning. Hepatic collagen levels were lower in ascorbic acid-treated versus non-treated mice. These results suggest that ascorbic acid inhibits hepatic steatosis, inflammation, and fibrosis in obese OVX mice. Thus, ascorbic acid intake may be useful for postmenopausal women with nonalcoholic fatty liver disease.

• Applied Biological Chemistry
• /
• 제51권2호
• /
• pp.114-118
• /
• 2008

Ginseng treated with several treatment conditions of various acids to search hydrolysates on the basis of increased biological activity and modified structure. In the result of acid treatment, the conversion rate of ginsenoside Rg3, Rk1 and Rg5 was highest when ginseng treated with citric acid. After added citric acid to ginseng extract, boiled at l00$^{\circ}C$ for 1 hour and add enzyme, which is examined change by time. It compared with group which did not treated acid. Two groups became difference according to enzyme but the generation rate of ginsenoside Rg3, Rk1 and Rg5 did not show difference greatly. Also, the generation rate of ginsenoside Rg3, Rk1 and Rg5 by time passes did not show difference. The generation rate of ginsenoside Rg3, Rk1 and Rg5 increased when increased acid concentration, temperature and time. We did exclusion molding to shorten treatment time. In the result of ginseng treated with citric acid of various concentrations at various temperatures as time passes by extrusion molding, the generation rate of ginsenoside Rg3, Rk1 and Rg5 was highest when ginseng treated with 3% citric acid at l60$^{\circ}C$ for 20 minutes. In addition, total saponin amount of ginseng treated with 3% citric acid at 160$^{\circ}C$ for 20 minutes was about 11% higher than ginseng heated at 120$^{\circ}C$ for 3 hours. These results indicated that our exclusion molding process more effective, compared to traditional red ginseng manufacturing process.