• 대한화학회지
• /
• 제31권5호
• /
• pp.452-456
• /
• 1987

benzenesulfonic acid (HBs)와 그 유도체인 p-chlorobenzenesulfonic acid(HCs)의 세기를 아세트산 용매에서 분광광도법으로 측정하였다. Indicator Base인 p-naphtholbenzein(PNB)을 사용하여 20.0${\pm}$0.1$^{\circ}$C에서 측정한 HTs, HBs, HCs 및 HNs의 이온화상수는 각각 $3.5{\times}10^2,\;4.1 {\times}10^2,\;$19.3{\times}10^2,\;50{\times}10^2$ 이었다.

• 약학회지
• /
• 제9권1_2호
• /
• pp.14-17
• /
• 1965

It has been known that the organic base complexes formed with the anionic acid base indicators are highly soluble in non-polar solvents but relatively insoluble in water. In the work reported here the formation of the complex between chloropromazine and bromothymol blue was studied and applied it to the determination of the base. The values to determine the binding ratio of the base with the indicator at pH 3.5 obtained from the application of Job's method of continuous variation and mol ratio method were both 1:1. From the application of this reaction to the determination of the base with carbon tetrachloride as the solvent for the extraction, fairy good results have been obtained.

• 대한화학회지
• /
• 제50권2호
• /
• pp.99-106
• /
• 2006

3-(2-thenoyl) 3-(p-NO2-phenylhydrazone) ethyl pyruvate(I), p-Br(II) 및 p-CH3(III)의 에탄올 용액의 전자흡수 스펙트럼을 조사하여 스펙트럼이 전자 전이에 해당하는 4개의 흡수띠로 구성되어 있음을 알았다. 이들 화합물의 pK 값을 분광광도법 및 pH 측정법으로 조사한 결과, 화합물(I)의 변색 범위는 페놀프탈레인과 유사한 8~10으로, 산-염기 지시약으로 사용될 수 있음을 알았다. 몇 가지 전이원소 (Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), UO2(II), La(III) 및 Zr(IV))와 이들 화합물과의 연속안정도상수를 pH 법으로 조사하여 본 결과, 모든 금속과 몰 비 1:1 및 1:2 (M: L)의 화학양론적 착물을 형성하며, 세 가지 유도체의 pK 값과 착물의 안정도 상수(log K)의 순서는 III > II > I 임을 알았다. 또한 전도도법 적정을 수행하여 이 적정이 금속이온과 리간드를 정량하는데 사용할 수 있음을 알았다.

• 분석과학
• /
• 제34권3호
• /
• pp.128-133
• /
• 2021

적정 화학반응에는 화학종의 전위차 변화뿐만 아니라 지시약의 색깔 변화도 포함된다. 전위차 적정에서는 종말점에서 전위의 급격한 변화를 측정하여 적정 곡선을 얻는다. 산-염기 적정은 일반적으로 지시약의 색 변화를 관찰하여 종말점을 결정함으로써 수행된다. 전위차를 측정하여 종말점을 결정하는 방법은 잘 확립 되어 상용화되어 있지만 색의 변화를 관찰하여 종말점을 얻는 장치는 많지 않은 실정이다. 적외선 광원과 감지기로 적정액 방울을 계수하고, 백색광원과 광 검출기로 종말점의 변색을 감지하여 아날로그-디지털 변환기인 아두이노 (Arduino)가 적용된 간단하고 정밀한 스펙트럼 종말점 검출 기구를 제작하였다. Spectrator는 지시약으로 티몰 블루를 사용한 산-염기 적정에서 재현성 측면에서 우수한 결과를 보였다. Spectrator 제작 과정과 이를 사용한 실험결과를 공유한다.

• 약학회지
• /
• 제19권1호
• /
• pp.30-35
• /
• 1975

pKi values and sensitivity of acid-base indicators in the mixed solvent systems of water-alcohols and water-acetone at differential pH and in concentration media were determined by spectrophotometric method. When the concentration of the organic solvents were increased, the pKi values of sulfophthalein indicators, thymol blue and bromcresol purple, became larger whereas those of an axo indicator, methyl yellow, became smaller nad the pH values of the equivalent points of acids became smaller and the pH values of the equivalent points of acids became higher than those in the aqueous solution. potassium bicarbonate, a standard compound used in the organic solvent systems without a prerequisite procedure of expelling carbon dioxide by boiling.

• 약학회지
• /
• 제40권6호
• /
• pp.670-678
• /
• 1996

The combinations of N-4-salicyloamido-2-amino-6-piperidinopyrimidine 3-oxide (Salmi) and two transitional metals were colored. Among metals, Fe(III) made a distinct colored comp lex with Salmi. The mole ratio of Salmi and Fe(III) in the complex was 1:1. This Salmi-Fe(III) complex was recrystallized in Hexane/Acetone(=10/1, v/v) and investigated its physicochemical properties. The color of this complex was changed by pH.; deep violet pink in acids, orange in neutral, and yellow in bases. The range of color change was approximately 0.7 pH unit. Acid-base titration of various acidic or basic drugs using Salmi-Fe(III) complex as an indicator showed good accuracy and reproducibility.

• 대한화학회지
• /
• 제48권2호
• /
• pp.189-194
• /
• 2004

이 연구에서는 산-염기 중화반응의 실험 방법에 관련된 과학 교과서 내용을 분석하고, 문제점을 개선하는데 목적이 있다. NaOH-HCl 수용액의 중화반응실험에서 1) 페놀프탈레인의 decoloration, 2) 염 생성 확인을 위해 적정된 용액의 농축을 위한 가열 과정에서의 색 변화, 3) 염 결정 확인의 어려움이 문제점으로 지적되었다. 이러한 문제점들은 페놀프탈레인의 구조변화에 근거하여 설명하였고, 개선된 실험방법을 제시하였다.

• 센서학회지
• /
• 제26권6호
• /
• pp.414-419
• /
• 2017

The optical characteristics of cresol red, phenol red, and neutral red immobilized in the thin film were investigated with absorbance measurement in order to find a sensing part of a fiber-optic pH sensor. Sol-Gel method with tetramethyl orthosilicate as a precursor was used to immobilize the pH indicators in the thin film. The absorbance spectra were measured when pH indicators were immobilized in the film and were dissolved in the buffer solution. Experimental results showed that the absorbance spectra could be changed when the pH indicator is immobilized in the thin film. As compared with other pH indicators, the neutral red exhibited similar absorbance spectra regardless of physical conditions and was sensitive over whole pH range between 4 and 11. In addition, the absorbance ratio of base peak to acid peak tended to increase in proportion to the increase in pH. Experimental results indicate that the neutral red is a good pH indicator for fabrication of a sensing part of the fiber-optic pH sensor.

• Journal of Ginseng Research
• /
• 제42권1호
• /
• pp.21-26
• /
• 2018

Background: Furosine (${\varepsilon}$-N-2-furoylmethyl-L-lysine, FML) is an amino acid derivative, which is considered to be an important indicator of the extent of damage (deteriorating the quality of amino acid and proteins due to a blockage of lysine and a decrease in the digestibility of proteins) during the early stages of the Maillard reaction. In addition, FML has been proven to be harmful because it is closely related to a variety of diseases such as diabetes. The qualitative analysis of FML in fresh and processed ginsengs was confirmed using HPLC-MS. Methods: An ion-pair reversed-phase LC method was used for the quantitative analysis of FML in various ginseng samples. Results: The contents of FML in the ginseng samples were 3.35-42.28 g/kg protein. The lowest value was observed in the freshly collected ginseng samples, and the highest value was found in the black ginseng concentrate. Heat treatment and honey addition significantly increased the FML content from 3.35 g/kg protein to 42.28 g/kg protein. Conclusion: These results indicate that FML is a promising indicator to estimate the heat treatment degree and honey addition level during the manufacture of ginseng products. The FML content is also an important parameter to identity the quality of ginseng products. In addition, the generation and regulation of potentially harmful Maillard reaction products-FML in ginseng processing was also investigated, providing a solid theoretical foundation and valuable reference for safe ginseng processing.

• Tribology and Lubricants
• /
• 제37권2호
• /
• pp.41-47
• /
• 2021

An experimental device was developed for analysis of hydraulic oil characteristics with dielectric constant sensors. Online analysis is the most effective method of the three methods used for analyzing lubricant oils. This is because it can monitor the machine condition effectively using oil sensors in real time without requiring excellent analysis skill and eliminates human errors. Determining the oil quality usually requires complex laboratory equipment for measuring factors such as density, viscosity, base number, acid number, water content, additive, and wear debris. However, the electric constant is another indicator of oil quality that can be measured on-site. The electric constant is the ratio of the capacitance of a capacitor using that material as a dielectric, compared with a similar capacitor that has a vacuum as its dielectric. The electric constant affects the factors such as the base oil, additive, temperature, electric field frequency, water content, and contaminants. In this study, the tendency of the electric constant is investigated with a variation of temperature, water content, and dust weight. The experimental device can control working temperature and mix the contaminants with oil. A machine condition monitoring program developed to analyze hydraulic oil is described. This program provides graph and digital values with variation of time. Moreover, it includes an alarm system for when the oil condition is bad.