• Korean Journal of Environmental Agriculture
• /
• v.37 no.1
• /
• pp.49-56
• /
• 2018

BACKGROUND: The mobile vortex wet scrubber was developed to remove the harmful chemicals from accidental releases. However, there was a disadvantage that it was limitedly used for volatile organic compounds (VOCs) such as toluene according to the physicochemical properties. This study compared the removal efficiencies of an improved mobile scrubber on toluene and ammonia by applying diverse adsorption and absorption methods. METHODS AND RESULTS: The removal efficiencies on harmful chemicals were examined using various adsorption and absorption methods of water vortex process (C), phosphoric acid-impregnated activated carbon adsorption (PCA), pH-controlled water (pH 2.5) vortex process absorption with sulfuric acid (SWA) after ammonia exposure, granular activated carbon adsorption (GCA), and activated carbon mat adsorption (CMA) after toluene exposure. As a result, the best removal efficiency was shown in the SWA for ammonia and GCA for toluene. Also, the SWA and GCA methods were compared with different concentration levels. In the case of ammonia exposure (5, 10 and 25%), there was no difference by concentration levels, and the concentration in the outlet gradually increased, with pH change from acid to base. In the case of toluene exposure (50, 75 and 100%), the outlet concentration was higher relative to the exposure concentration in the initial 10 min, but the outlet concentration was remained steady after 10 min. CONCLUSION: The newly improved mobile scrubber was also effective in removing VOCs through adsorption techniques (activated carbon, activated carbon fiber, carbon mat filter etc.), as well as removing acid-base harmful chemicals by neutralization reaction.

• Journal of the Korean Chemical Society
• /
• v.61 no.4
• /
• pp.204-210
• /
• 2017

In this study, we analyzed the descriptions of the electron movement model and the oxidation number change model presented in the 2009 revised curriculum and textbooks. We also investigated chemistry education major teachers' conceptions of limitations of each model. The electron movement model and oxidation number change model were presented in the curriculum and the textbooks. However, hybrid model was also presented which fail to grasp the limitation of each model. The hybrid model explains redox reactions of covalent bond compounds by electron movement model or even if it explains redox reactions by oxidation number change model, this explanations have the problem of confusing the virtual electron movement with the actual electron movement. A questionnaire and interviews were conducted to investigate chemistry education major teachers' perceptions of redox reactions. As results, many teachers did not recognize the limitations of each model and had difficulties to distinguish redox reactions from acid-base reactions because of the hybrid model.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.1
• /
• pp.7-12
• /
• 2010

The full-length cDNA of the porcine peroxisomal ${\Delta}^3$,${\Delta}^2$-enoyl-CoA isomerase (PECI) gene encodes a monofunctional peroxisomal ${\Delta}^3$,${\Delta}^2$-enoyl-CoA isomerase. Cloning and sequencing of the porcine PECI cDNA revealed the presence of an 1185-base pair open reading frame predicted to encode a 394-amino acid protein by the 5'rapid amplification of cDNA ends (5'RACE) and EST sequences. The porcine PECI gene was expressed in seven tissues (heart, liver, spleen, lung, kidney, skeletal muscle, fat) which was revealed by reverse transcriptase-polymerase chain reaction (RT-PCR). The porcine PECI was mapped to SSC71/2 p11-13 using the somatic cell hybrid panel (SCHP) and the radiation hybrid panel (RH) (LOD score 12.84). The data showed that PECI was closely linked to marker S0383. A C/T single nucleotide polymorphism in PECI exon 10 (3'UTR) was detected as a PvuII PCR-RFLP. Association analysis in our experimental pig population showed that different genotypes of PECI gene were significantly associated with the Average Backfat thickness (ABF) (p<0.05) and Buttock backfat thickness (p<0.01).

• KSBB Journal
• /
• v.5 no.3
• /
• pp.279-291
• /
• 1990

Partial hydrolysed and deacetylated chitin, CHITA and CHITB as supports of immobilized enzyme were obtained by treatment of acid and base respectively. Glutaraldehyde, bifunctional reagent, was employed for crosslinking between $\beta$-glucosidase and support. Immobilized enzyme activities of CHITA-Gase and CHITB-Gase were determined with the reaction of p-nitrophenol-$\beta$-D-glucopyranoside(PNG) in batch reactor, CSTR and PFR. Their optimum temperature, pH and enzymatic characteristics including Km and Vmax values were observed with variation of the flow rates. Mass transfer coefficient(h), effectiveness factor(η), deactivation rate(kd ) of two immobilized enzymes were also examined to compare efficiency of reactors.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.1
• /
• pp.46-54
• /
• 2017

Marcel Pourbaix에 의해 만들어진 Eh-pH 도표는 화학적으로 안정한 상을 pH와 전위 (Potential or Eh)의 관점으로 도시한 것으로서 수용액 내에서 일어나는 화학반응을 부식-방식의 관점에서 이해하데 유용하게 사용되어 왔다. pH (potential of hydrogen)는 수소이온의 농도의 함수이며, Eh는 표준수소전극 (SHE, standard hydrogen electrode) 에 대한 전위를 나타낸다. 수용액에서의 도금 반응은 부식반응의 역반응이라 할 수 있으므로 도금반응도 이 도표를 이용하면 반응에 대한 열역학적 예측이 가능하다. 국내외 전기화학 및 표면공학 관련 교재들을 보면 Eh-pH 도표로 대표되는 열역학이나 분극곡선으로 대표되는 속도론에 대한 설명은 주로 부식의 관점에서 설명이 되어있어 도금을 공부하는 학생들에게는 직접적인 이해가 쉽지 않은 것이 사실이다. 저자는 출연연구소에 근무하면서 새로 들어오는 학연생(대학원생)들의 Eh-pH 도표에 대한 이해도를 알아보면 이 도표를 이해하고 이용할 줄 아는 학생이 거의 없다는 점을 안타깝게 여겨왔다. 최근에는 단순한 금속 도금이 아니라 나노 분말 합성, 반도체 물질 합성 등 여러 가지 공정기술과 응용기술이 수용액에서의 산화-환원 반응을 이용하고 있기 때문에 Eh-pH 도표의 중요성은 더해가고 있음을 느끼고 있었다. 그러던 중, 일본의 표면 처리 학술지인 표면기술(表面技術) (2013년, 64권 2호)에 'Eh-pH 도표의 표면기술에의 응용'이라는 제하의 소특집이 발간되었다. 이 소특집은 6편의 논문으로 되어 있었다. 저자는 이 소특집을 읽는 순간 이 논문들을 번역하여 표면공학회지에 소개를 하면 도금이나 전기화학을 공부하는 학생들에게 큰 도움이 될 것이라는 생각을 하였다. 본 기술해설 논문은 저자가 이 소특집에 게재된 논문을 번역하고 일부 내용은 저자의 의견으로 가감하여 표면공학회 학생 회원 및 기업의 연구원들에게 소개하기 위하여 저역을 한 것이다. 이 논문은 매 호 한편씩 소개할 예정이며, 원문을 읽고 싶다면 표면기술(表面技術)을 참조하길 바란다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7838-7843
• /
• 2015

In this study, metformin hydrochloride for first choice of type 2 diabetes patient is administered relatively high dose, 1000 to 2000 mg orally once a day, and had very high water solubility, so it make difficult to swallow tablet to requires high amount of sustained release agent. To overcome these challenges, we used novel metformin salts had relatively low water solubility to minimize sustaining excipient for small size of dosage form. six novel metformin salts were synthesized by making metformin free form under reaction with NaOH and adding acid salts. we confirmed metformin stearate had the lowest water solubility and showed half drug release in dissolution study at 12hour. In conclusion, novel metformin salts had low water solubility can be used to reduce the size of sustained metformin tablet for improving patient compliance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.240.2-240.2
• /
• 2013

The device scale of flash memory was confronted with quantum mechanical limitation. The next generation memory device will be required a break-through for the device scaling problem. Especially, graphene is one of important materials to overcome scaling and operation problem for the memory device, because ofthe high carrier mobility, the mechanicalflexibility, the one atomic layer thick and versatile chemistry. We demonstrate the hybrid memory consisted with the metal-oxide quantum dots and the mono-layered graphene which was transferred to $SiO_2$ (5 nm)/Si substrate. The 5-nm thick secondary $SiO_2$ layer was deposited on the mono-layered graphene by using ultra-high vacuum sputtering system which base pressure is about $1{\times}10^{-10}$ Torr. The $In_2O_3$ quantum dots were distributed on the secondary $SiO_2$2 layer after chemical reaction between deposited In layer and polyamic acid layer through soft baking at $125^{\circ}C$ for 30 min and curing process at $400^{\circ}C$ for 1 hr by using the furnace in $N_2$ ambient. The memory devices with the $In_2O_3$ quantum dots on graphene monolayer between $SiO_2$ thin films have demonstrated and evaluated for the application of next generation nonvolatile memory device. We will discuss the electrical properties to understating memory effect related with quantum mechanical transport between the $In_2O_3$ quantum dots and the Fermi level of graphene layer.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.9
• /
• pp.1256-1264
• /
• 2016

Adrenergic, alpha-1B-, receptor (ADRA1B) and peroxisome proliferator-activated receptor gamma, coactivator 1 beta (PPARGC1B) genes are involved in regulation of hen ovarian development. In this study, these two genes were investigated as possible molecular markers associated with hen-housed egg production, egg weight (EW) and body weight in Chinese Dagu hens. Samples were analyzed using the polymerase chain reaction-single strand conformation polymorphism (PCR-SSCP) technique, followed by sequencing analysis. Two novel single nucleotide polymorphisms (SNPs) were identified within the candidate genes. Among them, an A/G transition at base position 1915 in exon 2 of ADRA1B gene and a T/C mutation at base position 6146 in the 3'- untranslated region (UTR) of PPARGC1B gene were found to be polymorphic and named SNP A1915G and T6146C, respectively. The SNP A1915G (ADRA1B) leads to a non-synonymous substitution (aspartic acid 489-to-glycine). The 360 birds from the Dagu population were divided into genotypes AA and AG, allele A was found to be present at a higher frequency. Furthermore, the AG genotype correlated with significantly higher hen-housed egg production (HHEP) at 30, 43, 57, and 66 wks of age and with a higher EW at 30 and 43 wks (p<0.05). For the SNP T6146C (PPARGC1B), the hens were typed into TT and TC genotypes, with the T allele shown to be dominant. The TC genotype was also markedly correlated with higher HHEP at 57 and 66 wks of age and EW at 30 and 43 wks (p<0.05). Moreover, four haplotypes were reconstructed based on these two SNPs, with the AGTC haplotype found to be associated with the highest HHEP at 30 to 66 wks of age and with higher EW at 30 and 43 wks (p<0.05). Collectively, the two SNPs identified in this study might be used as potential genetic molecular markers favorable in the improvement of egg productivity in chicken breeding.

• Economic and Environmental Geology
• /
• v.34 no.6
• /
• pp.507-522
• /
• 2001

At the Tongyeong mine, quartz, rhodochrosite (kutnahorite), muscovite, illite, pyrite, galena, chalcopyrite. sphalerite, acanthite, and hessite are the principal vein minerals. They were deposited under epithermal conditions in two stages. Ore mineral assemblages and associated gangue phases in stage can be clearly divided into two general associations: an early cycle (band) that appeared with introduction of most of the sulfides and electrum, and a later cycle in which base metal and carbonate-bearing assemblages (mostly rhodochrosite) became dominant. Tellurides and some electrum occur as small rounded grains within subhedral-to euhedral pyrite or anhedral galena in stageII. Sulfide mineralization is zoned from pyrite to galena and sphalerite. We have used computer modeling to simulate formation of four stages of vein genesis. The reaction of a single fluid with andesite host rock at 28$0^{\circ}C$, isobaric cooling of a single fluid from 26$0^{\circ}C$ to 12$0^{\circ}C$, and boiling and mixing of a fluid with both decreasing pressure and temperature were studied using the CHILLER program. Calculations show that the precipitation of alteration minerals is due to fluid-andesite interaction as temperature drops. Speciation calculations confirm that the hydrothermal fluids with moderately high salinities and pH 5.7 (acid), were capable of transporting significant quantities of base metals. The abundance of gold in fluid depends critically on the ratio of total base metals and iron to sulfide in the aqueous phase because gold is transported as an Au(HS)$_2$- complex, which is sensitive to sulfide activity. Modeling results for Tongyeong mineralization show strong influence of shallow hydrogenic processes such as boiling and fluid mixing. The variable handing in stageII mineralization is best explained by maltiple boilings of hydrothermal fluid followed by lateral mixing of the fluid with overlying diluted, steam-heated ground water. The degree of similarity of calculated mineral assemblages and observed electrum composition and field relationships shows the utility of the numerical simulation method in identifying chemical processes that accompany boiling and mixing in Te-bearing Au-Ag system. This has been applied in models to narrow the search area for epithermal ores.

• Korean Journal of Environmental Biology
• /
• v.37 no.4
• /
• pp.749-758
• /
• 2019

The aim of this study is to provide a scientific basis for decision making regarding environmental damage in case of future chemical accidents by evaluating the ecotoxicity of 4 substances requiring preparation for accidents. For this purpose, acute and chronic toxicities of nitric acid, sulfuric acid, hydrogen peroxide, and ammonia solution, which can change the physical and chemical properties of soil to Paronychiurus kimi(Collembola) were investigated. The pH of artificial soil spiked with a series of test chemical concentrations was also measured. The pH of soil spiked with 10,000 mg kg^-1 of soil nitric acid, sulfuric acid, hydrogen peroxide, and ammonia solution were 2.86, 2.72, 7.18 and 9.69, respectively. The 28-d LC₅₀ of nitric acid, sulfuric acid, hydrogen peroxide and ammonia solution were 2,703, 5,414, 3,158 and 859 mg kg^-1 soil dry wt., respectively and 28-d EC₅₀ were 587, 2,148, 1,300 and 216 mg kg^-1 soil dry wt., respectively. These results indicated that the mortality and juvenile production of P. kimi were influenced by not only the soil pH but also by the reduced organic content and products produced by the reaction of soil with the tested chemicals. Given the fact that most substances requiring preparation for accidents can change soil characteristics, assessment and restoration methods that take into account changes in soil properties are needed for accurate decision making after chemical accidents.